[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] Requesting suggestions to resolve an bmc/ipmi issue
From: |
Ravi DevPro |
Subject: |
Re: [Freeipmi-users] Requesting suggestions to resolve an bmc/ipmi issue |
Date: |
Tue, 5 Sep 2017 10:08:41 +0530 |
Hi FreeIPMI team,
At the moment, apt-get install freeipmi-tools (on Ubunut 14.04) installs v1.1.5
by default. Is there any way of us getting freeipmi-tools v1.4.9 (or
beyond) installed on Ubuntu 14.04? Albert Chu, suggested that '*invalid
channel number' *issue was fixed in v1.4.9.
I tried downloading freeipmit-tool source code and build bmc-config binary.
However I wasn't able to run the command,
~/freeipmi-1.5.7$ cd ./ipmi-config/
~/freeipmi-1.5.7/ipmi-config$ bmc-config --version
/usr/local/sbin/ipmi-config: error while loading shared libraries:
libfreeipmi.so.17: cannot open shared object file: No such file or directory
Any pointers/ideas will be greatly appreciated.
Thanks for considering and taking time for my queries and requests.
Ravi
On Fri, Sep 1, 2017 at 8:16 AM, Ravi DevPro <address@hidden> wrote:
> Hi FreeIPMI Team,
>
> I have been struggling with an issue for couple of days now. I am using an
> open source tool called MAAS (v1.9) for provisioning OS on physical
> servers. This tool primarily relies uses bmc-config commands.
>
> Target hardware is some proprietary Intel based server (not HP/Dell) which
> has BMC chip on it. It also has multiple LAN channels (1,2,3) where 1 & 2
> being an in band NIC and channel 3 being dedicated BMC interface. Eth
> interfaces of Channel 1 and Channel 3 are connected in a common broadcast
> domain and get the IPs from a common DHCP server.
>
> The following are the set of bmc-config commands that gets triggered by
> MAAS on the host (on which OS will be installed).
>
> bmc-config, --checkout, --key-pair=Lan_Conf:IP_Address_Source
> bmc-config, -L
> bmc-config, --checkout, --key-pair=User2:Username
> bmc-config, --checkout, --key-pair=User3:Username
> bmc-config, --checkout, --key-pair=User4:Username
> bmc-config, --checkout, --key-pair=User5:Username
> bmc-config, --checkout, --key-pair=User6:Username
> bmc-config, --checkout, --key-pair=User7:Username
> bmc-config, --checkout, --key-pair=User8:Username
> bmc-config, --checkout, --key-pair=User9:Username
> bmc-config, --checkout, --key-pair=User10:Username
> bmc-config, --checkout, --key-pair=User11:Username
> bmc-config, --checkout, --key-pair=User12:Username
> bmc-config, --checkout, --key-pair=User13:Username
> bmc-config, --checkout, --key-pair=User14:Username
> bmc-config, --checkout, --key-pair=User15:Username
> bmc-config, --commit, --key-pair=User6:Username=maas
> bmc-config, --commit, --key-pair=User6:Password=DYJuTLXmrljoGl
> bmc-config, --commit, --key-pair=User6:Enable_User=Yes
> bmc-config, --commit, --key-pair=User6:Lan_Privilege_Limit=Administrator
> bmc-config, --commit, --key-pair=User6:Lan_Enable_IPMI_Msgs=Yes
> bmc-config, --checkout, --key-pair=User6:Username
> bmc-config, --checkout, --key-pair=User6:Lan_Privilege_Limit
> bmc-config, --checkout, --key-pair=User6:Lan_Enable_IPMI_Msgs
> bmc-config, --checkout, --key-pair=Lan_Conf:IP_Address
>
>
> All of these commands gets executed successfully however on *Lan Channel
> 1 interface*. I* want this to be set to IP address assigned to Lan
> Channel 3* (i.e Dedicated BMC interface). Thats my objective because MAAS
> tool uses Lan_Conf:IP_Address for provisioning OS & it achieves this over
> couple of power cycles of target host. The problem is that, since
> *Lan_Conf:IP_Address
> *is pointing to the IP on Lan Channel 1, that IP would not be available
> once the server is switched off and that blocks the provisioning workflow.
>
> So I have tried following so far,
>
> I tried appending '*--lan-channel-number=3*' on those bmc-config commands
> (listed above) & got '*invalid channel number*' in response.
>
> But when i execute *ipmitool -H 10.6.0.21 -U tocp -P tocp lan print 3*
> Set in Progress : Set Complete
> Auth Type Support : MD5 PASSWORD
> Auth Type Enable : Callback : MD5 PASSWORD
> : User : MD5 PASSWORD
> : Operator : MD5 PASSWORD
> : Admin : MD5 PASSWORD
> : OEM :
> IP Address Source : DHCP Address
> IP Address : 10.6.0.21
> Subnet Mask : 255.255.255.0
> MAC Address : a4:bf:01:03:94:bb
> SNMP Community String : public
> IP Header : TTL=0x00 Flags=0x00 Precedence=0x00 TOS=0x00
> BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
> Gratituous ARP Intrvl : 0.0 seconds
> Default Gateway IP : 10.6.0.1
> Default Gateway MAC : 00:00:00:00:00:00
> Backup Gateway IP : 0.0.0.0
> Backup Gateway MAC : 00:00:00:00:00:00
> 802.1q VLAN ID : Disabled
> 802.1q VLAN Priority : 0
> RMCP+ Cipher Suites : 0,1,2,3,4,6,7,8,9,11,12,13,15,16,17,18
> Cipher Suite Priv Max : caaaaaaaaaaaaaa
> : X=Cipher Suite Unused
> : c=CALLBACK
> : u=USER
> : o=OPERATOR
> : a=ADMIN
> : O=OEM
>
>
> *ipmitool -H 10.6.0.21 -U tocp -P tocp lan print 1*
> Set in Progress : Set Complete
> Auth Type Support : MD5 PASSWORD
> Auth Type Enable : Callback : MD5 PASSWORD
> : User : MD5 PASSWORD
> : Operator : MD5 PASSWORD
> : Admin : MD5 PASSWORD
> : OEM :
> IP Address Source : DHCP Address
> IP Address : 10.6.0.14
> Subnet Mask : 255.255.255.0
> MAC Address : a4:bf:01:03:94:b9
> SNMP Community String : public
> IP Header : TTL=0x00 Flags=0x00 Precedence=0x00 TOS=0x00
> BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
> Gratituous ARP Intrvl : 0.0 seconds
> Default Gateway IP : 10.6.0.1
> Default Gateway MAC : 00:00:00:00:00:00
> Backup Gateway IP : 0.0.0.0
> Backup Gateway MAC : 00:00:00:00:00:00
> 802.1q VLAN ID : Disabled
> 802.1q VLAN Priority : 0
> RMCP+ Cipher Suites : 0,1,2,3,4,6,7,8,9,11,12,13,15,16,17,18
> Cipher Suite Priv Max : caaaaaaaaaaaaaa
> : X=Cipher Suite Unused
> : c=CALLBACK
> : u=USER
> : o=OPERATOR
> : a=ADMIN
> : O=OEM
>
> *bmc-config -h 10.6.0.21 -u tocp -p tocp --checkout
> --key-pair=Lan_Conf:IP_Address*
> Section Lan_Conf
> ## Give valid IP address
> IP_Address 10.6.0.14
> EndSection
>
>
>
>
>
> Any kind of pointers/suggestions would be greatly appreciated.
>
> Thank you for your time & consideration.
> Ravi
>