[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Getfem-commits] r4899 - in /trunk/getfem: doc/sphinx/source/userdoc/ in
From: |
logari81 |
Subject: |
[Getfem-commits] r4899 - in /trunk/getfem: doc/sphinx/source/userdoc/ interface/src/ interface/src/scilab/help/en_US/ interface/src/scilab/he... |
Date: |
Mon, 23 Mar 2015 16:15:17 -0000 |
Author: logari81
Date: Mon Mar 23 17:15:17 2015
New Revision: 4899
URL: http://svn.gna.org/viewcvs/getfem?rev=4899&view=rev
Log:
fix typos
Modified:
trunk/getfem/doc/sphinx/source/userdoc/model_elastoplasticity.rst
trunk/getfem/doc/sphinx/source/userdoc/model_linear_elasticity.rst
trunk/getfem/interface/src/gf_mesh_fem_set.cc
trunk/getfem/interface/src/gf_mesh_set.cc
trunk/getfem/interface/src/gf_model_set.cc
trunk/getfem/interface/src/scilab/help/en_US/gf_model_set.xml
trunk/getfem/interface/src/scilab/help/latex/getfemmatlab.lyx
trunk/getfem/interface/src/scilab/help/latex/getfemmatlab.tex
trunk/getfem/src/getfem/getfem_contact_and_friction_common.h
trunk/getfem/src/getfem/getfem_contact_and_friction_large_sliding.h
trunk/getfem/src/getfem/getfem_models.h
trunk/getfem/src/gmm/gmm_blas.h
Modified: trunk/getfem/doc/sphinx/source/userdoc/model_elastoplasticity.rst
URL:
http://svn.gna.org/viewcvs/getfem/trunk/getfem/doc/sphinx/source/userdoc/model_elastoplasticity.rst?rev=4899&r1=4898&r2=4899&view=diff
==============================================================================
--- trunk/getfem/doc/sphinx/source/userdoc/model_elastoplasticity.rst
(original)
+++ trunk/getfem/doc/sphinx/source/userdoc/model_elastoplasticity.rst Mon Mar
23 17:15:17 2015
@@ -76,7 +76,7 @@
Perfect elasto-plasticity problem
+++++++++++++++++++++++++++++++++
-Contrary to the elastic phenomenon, the plasticity of a material is
characterised by the onset of permanent deformations whithin the solid,
resulted from the action of the constraints to which it is subjected.
+Contrary to the elastic phenomenon, the plasticity of a material is
characterised by the onset of permanent deformations within the solid, resulted
from the action of the constraints to which it is subjected.
Generally, these deformations appear beyond a certain stress threshold, noted
:math:`s`. In fact, under this threshold the behavior of the material is linear
and reversible, which means elastic. On the contrary, when :math:`\sigma` > s,
permanent deformations appear and the behavior is not linear at all.
@@ -245,7 +245,7 @@
##################################################
-Here, :math:`\sigma` is whithin the convex :math:`K` and so the projection can
be written as following:
+Here, :math:`\sigma` is within the convex :math:`K` and so the projection can
be written as following:
.. math::
Modified: trunk/getfem/doc/sphinx/source/userdoc/model_linear_elasticity.rst
URL:
http://svn.gna.org/viewcvs/getfem/trunk/getfem/doc/sphinx/source/userdoc/model_linear_elasticity.rst?rev=4899&r1=4898&r2=4899&view=diff
==============================================================================
--- trunk/getfem/doc/sphinx/source/userdoc/model_linear_elasticity.rst
(original)
+++ trunk/getfem/doc/sphinx/source/userdoc/model_linear_elasticity.rst Mon Mar
23 17:15:17 2015
@@ -54,7 +54,7 @@
brick.
-linear incompressibility (or nearly incompressibility) brick
+Linear incompressibility (or nearly incompressibility) brick
------------------------------------------------------------
This brick adds a linear incompressibility condition (or a nearly
incompressible
Modified: trunk/getfem/interface/src/gf_mesh_fem_set.cc
URL:
http://svn.gna.org/viewcvs/getfem/trunk/getfem/interface/src/gf_mesh_fem_set.cc?rev=4899&r1=4898&r2=4899&view=diff
==============================================================================
--- trunk/getfem/interface/src/gf_mesh_fem_set.cc (original)
+++ trunk/getfem/interface/src/gf_mesh_fem_set.cc Mon Mar 23 17:15:17 2015
@@ -156,7 +156,7 @@
/address@hidden ('classical discontinuous fem', @int K[, @tscalar alpha[,
@ivec CVIDX]])
Assigns a classical (Lagrange polynomial) discontinuous fem or order K.
- Similar to MESH_FEM:SET('classical fem') except that
+ Similar to MESH_FEM:SET('set classical fem') except that
FEM_PK_DISCONTINUOUS is used. Param `alpha` the node inset,
:math:`0 \leq alpha < 1`, where 0 implies usual dof nodes, greater values
move the nodes toward the center of gravity, and 1 means that all
Modified: trunk/getfem/interface/src/gf_mesh_set.cc
URL:
http://svn.gna.org/viewcvs/getfem/trunk/getfem/interface/src/gf_mesh_set.cc?rev=4899&r1=4898&r2=4899&view=diff
==============================================================================
--- trunk/getfem/interface/src/gf_mesh_set.cc (original)
+++ trunk/getfem/interface/src/gf_mesh_set.cc Mon Mar 23 17:15:17 2015
@@ -303,7 +303,7 @@
/address@hidden ('extend region', @int rnum, @dmat CVFIDs)
Extends the region identified by the region number `rnum` to include
the set of convexes or/and convex faces provided in the matrix
- `CVFIDs`, see also 'set_region'@address@hidden/
+ `CVFIDs`, see also ``MESH:SET('set region)address@hidden/
sub_command
("extend region", 2, 2, 0, 0,
set_region(*pmesh, in, false);
Modified: trunk/getfem/interface/src/gf_model_set.cc
URL:
http://svn.gna.org/viewcvs/getfem/trunk/getfem/interface/src/gf_model_set.cc?rev=4899&r1=4898&r2=4899&view=diff
==============================================================================
--- trunk/getfem/interface/src/gf_model_set.cc (original)
+++ trunk/getfem/interface/src/gf_model_set.cc Mon Mar 23 17:15:17 2015
@@ -1274,7 +1274,7 @@
a multiplier `multname` peviously added to the model (should be a fixed
size variable). The constraint is :math:`BU=L`
with `B` being a rectangular sparse matrix. It is possible to change
- the constraint at any time whith the methods MODEL:SET('set private
matrix')
+ the constraint at any time with the methods MODEL:SET('set private matrix')
and MODEL:SET('set private rhs'). Return the brick index in the
address@hidden/
sub_command
("add constraint with multipliers", 4, 4, 0, 1,
@@ -1324,7 +1324,7 @@
The constraint is :math`BU=L` with `B` being a rectangular sparse matrix.
Be aware that `B` should not contain a palin row, otherwise the whole
tangent matrix will be plain. It is possible to change the constraint
- at any time whith the methods MODEL:SET('set private matrix')
+ at any time with the methods MODEL:SET('set private matrix')
and MODEL:SET('set private rhs'). The method
MODEL:SET('change penalization coeff') can be used. Return the brick
index in the address@hidden/
Modified: trunk/getfem/interface/src/scilab/help/en_US/gf_model_set.xml
URL:
http://svn.gna.org/viewcvs/getfem/trunk/getfem/interface/src/scilab/help/en_US/gf_model_set.xml?rev=4899&r1=4898&r2=4899&view=diff
==============================================================================
--- trunk/getfem/interface/src/scilab/help/en_US/gf_model_set.xml
(original)
+++ trunk/getfem/interface/src/scilab/help/en_US/gf_model_set.xml Mon Mar
23 17:15:17 2015
@@ -791,7 +791,7 @@
a multiplier <literal>multname</literal> peviously added to the model
(should be a fixed
size variable). The constraint is <latex
style="text"><![CDATA[BU=L]]></latex>
with <literal>B</literal> being a rectangular sparse matrix. It is
possible to change
- the constraint at any time whith the methods gf_model_set(model M, 'set
private matrix')
+ the constraint at any time with the methods gf_model_set(model M, 'set
private matrix')
and gf_model_set(model M, 'set private rhs'). Return the brick index in
the model.
</para>
</listitem>
@@ -803,7 +803,7 @@
The constraint is :math<literal>BU=L</literal> with <literal>B</literal>
being a rectangular sparse matrix.
Be aware that <literal>B</literal> should not contain a palin row,
otherwise the whole
tangent matrix will be plain. It is possible to change the constraint
- at any time whith the methods gf_model_set(model M, 'set private matrix')
+ at any time with the methods gf_model_set(model M, 'set private matrix')
and gf_model_set(model M, 'set private rhs'). The method
gf_model_set(model M, 'change penalization coeff') can be used. Return the
brick
index in the model.
Modified: trunk/getfem/interface/src/scilab/help/latex/getfemmatlab.lyx
URL:
http://svn.gna.org/viewcvs/getfem/trunk/getfem/interface/src/scilab/help/latex/getfemmatlab.lyx?rev=4899&r1=4898&r2=4899&view=diff
==============================================================================
--- trunk/getfem/interface/src/scilab/help/latex/getfemmatlab.lyx
(original)
+++ trunk/getfem/interface/src/scilab/help/latex/getfemmatlab.lyx Mon Mar
23 17:15:17 2015
@@ -33666,7 +33666,7 @@
\end_inset
with `B` being a rectangular sparse matrix.
- It is possible to change the constraint at any time whith the methods 'set
+ It is possible to change the constraint at any time with the methods 'set
private matrix' and 'set private rhs'
\end_layout
@@ -33754,7 +33754,7 @@
with `B` being a rectangular sparse matrix.
Be aware that `B` should not contain a plain row, otherwise the whole tangent
matrix will be plain.
- It is possible to change the constraint at any time whith the methods 'set
+ It is possible to change the constraint at any time with the methods 'set
private matrix' and 'set private rhs'.
The method 'change penalization coeff' can be used.
\end_layout
Modified: trunk/getfem/interface/src/scilab/help/latex/getfemmatlab.tex
URL:
http://svn.gna.org/viewcvs/getfem/trunk/getfem/interface/src/scilab/help/latex/getfemmatlab.tex?rev=4899&r1=4898&r2=4899&view=diff
==============================================================================
--- trunk/getfem/interface/src/scilab/help/latex/getfemmatlab.tex
(original)
+++ trunk/getfem/interface/src/scilab/help/latex/getfemmatlab.tex Mon Mar
23 17:15:17 2015
@@ -3041,7 +3041,7 @@
size variable).
The constraint is $BU=L$ with `B` being a rectangular sparse matrix.
It is possible to change the constraint
-at any time whith the methods 'set private matrix'
+at any time with the methods 'set private matrix'
and 'set private rhs'
\sep{@@ind_brick=gf_model_set(md,'add constraint with penalization', \tstr
varname, \tscal coeff, \tmat B, \tvec L)@@} :
@@ -3049,7 +3049,7 @@
The constraint is $BU=L$ with `B` being a rectangular sparse matrix.
Be aware that `B` should not contain a plain row, otherwise the whole
tangent matrix will be plain. It is possible to change the constraint
-at any time whith the methods 'set private matrix'
+at any time with the methods 'set private matrix'
and 'set private rhs'. The method 'change penalization coeff' can be used.
\sep{@@ind_brick=gf_model_set(md,'add explicit matrix', \tstr varname1, \tstr
varname2, \tmat B[, \tint issymmetric[, \tint iscoercive]])@@} :
Modified: trunk/getfem/src/getfem/getfem_contact_and_friction_common.h
URL:
http://svn.gna.org/viewcvs/getfem/trunk/getfem/src/getfem/getfem_contact_and_friction_common.h?rev=4899&r1=4898&r2=4899&view=diff
==============================================================================
--- trunk/getfem/src/getfem/getfem_contact_and_friction_common.h
(original)
+++ trunk/getfem/src/getfem/getfem_contact_and_friction_common.h Mon Mar
23 17:15:17 2015
@@ -798,7 +798,7 @@
/** Add a rigid obstacle whose geometry corresponds to the zero level-set
of the high-level generic assembly expression `expr`
to an existing raytracing interpolate transformation called 'transname'.
- In `expr`, the current position is denoted `X` whith components
+ In `expr`, the current position is denoted `X` with components
`X(1), X(2), ...`. It is also allowed to use `x` instead of `X(1)`,
`y` instead of `X(2)`, `z` instead of `X(3)` and `w` instead of `X(4)`.
*/
Modified: trunk/getfem/src/getfem/getfem_contact_and_friction_large_sliding.h
URL:
http://svn.gna.org/viewcvs/getfem/trunk/getfem/src/getfem/getfem_contact_and_friction_large_sliding.h?rev=4899&r1=4898&r2=4899&view=diff
==============================================================================
--- trunk/getfem/src/getfem/getfem_contact_and_friction_large_sliding.h
(original)
+++ trunk/getfem/src/getfem/getfem_contact_and_friction_large_sliding.h Mon Mar
23 17:15:17 2015
@@ -160,7 +160,7 @@
/** Adds a rigid obstacle to an existing large sliding contact brick.
`indbrick` is the brick index, `obs` is the expression of a
function which should be closed to a signed distance to the obstacle.
- In `obs`, the current position is denoted `X` whith components
+ In `obs`, the current position is denoted `X` with components
`X(1), X(2), ...`. It is also allowed to use `x` instead of `X(1)`,
`y` instead of `X(2)`, `z` instead of `X(3)` and `w` instead of `X(4)`.
*/
Modified: trunk/getfem/src/getfem/getfem_models.h
URL:
http://svn.gna.org/viewcvs/getfem/trunk/getfem/src/getfem/getfem_models.h?rev=4899&r1=4898&r2=4899&view=diff
==============================================================================
--- trunk/getfem/src/getfem/getfem_models.h (original)
+++ trunk/getfem/src/getfem/getfem_models.h Mon Mar 23 17:15:17 2015
@@ -2332,7 +2332,7 @@
sparse matrix.
Be aware that `B` should not contain a plain row, otherwise the whole
tangent matrix will be plain. It is possible to change the constraint
- at any time whith the methods set_private_matrix and set_private_rhs.
+ at any time with the methods set_private_matrix and set_private_rhs.
The method change_penalization_coeff can also be used.
*/
template <typename MAT, typename VECT>
@@ -2352,7 +2352,7 @@
size variable).
The constraint is $BU=L$ with `B` being a rectangular sparse matrix.
It is possible to change the constraint
- at any time whith the methods set_private_matrix
+ at any time with the methods set_private_matrix
and set_private_rhs.
*/
template <typename MAT, typename VECT>
Modified: trunk/getfem/src/gmm/gmm_blas.h
URL:
http://svn.gna.org/viewcvs/getfem/trunk/getfem/src/gmm/gmm_blas.h?rev=4899&r1=4898&r2=4899&view=diff
==============================================================================
--- trunk/getfem/src/gmm/gmm_blas.h (original)
+++ trunk/getfem/src/gmm/gmm_blas.h Mon Mar 23 17:15:17 2015
@@ -1218,8 +1218,8 @@
}
/* ******************************************************************** */
- /* Matrix and vector addition */
- /* algorithms are built in order to avoid some conflicts whith */
+ /* Matrix and vector addition */
+ /* algorithms are built in order to avoid some conflicts with */
/* repeated arguments or with overlapping part of a same object. */
/* In the latter case, conflicts are still possible. */
/* ******************************************************************** */
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Getfem-commits] r4899 - in /trunk/getfem: doc/sphinx/source/userdoc/ interface/src/ interface/src/scilab/help/en_US/ interface/src/scilab/he...,
logari81 <=