gluster-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Gluster-devel] glusterfs_1.4.0qa19: small issues


From: Raghavendra G
Subject: Re: [Gluster-devel] glusterfs_1.4.0qa19: small issues
Date: Wed, 11 Jun 2008 11:25:40 +0400

Hi Brent,
glusterfs--mainline--3.0--patch-188 should fix server process consuming lots
of memory with io-threads loaded. Can you please confirm?

regards,
On Wed, Jun 11, 2008 at 3:37 AM, Brent A Nelson <address@hidden> wrote:

> On Tue, 10 Jun 2008, Brent A Nelson wrote:
>
>  On Tue, 10 Jun 2008, Brent A Nelson wrote:
>>
>>  Okay, that's fixed, along with the removexattr issue.  Another couple of
>>> quirks; cp -a /usr/bin /gluster/bin makes a perfect copy, except:
>>>
>>> 1) /gluster/bin itself doesn't preserve the correct permissions (rsync
>>> succeeds, though, and a cp -a to /tmp also works fine, so it's not a problem
>>> with cp); the contents are all fine, except:
>>>
>>> 2) /gluster/bin/sudoedit did not have the setuid bit set (this fails with
>>> rsync, too, but a manual chmod u+s succeeds).
>>>
>>>
>> I tortured my GlusterFS pretty heavily today.  Apart from the issues
>> above, it held up perfectly for repeated rsync/rm cycles.
>>
>> I noticed that when doing a large (10GB ) dd write on a client, if the
>> write was going to the client node (which is also a server), ls would hang
>> for long periods on that client.  So, I figured it was time to load up
>> io-threads (just 2 threads per export) on the servers to split up the
>> metadata and io traffic.  It worked beautifully; ls -al was very responsive
>> on all clients, even with heavy write activity.
>>
>> However, I noticed that with io-threads loaded, the server processes would
>> sometimes consume several GB of RAM (up to 2.2GB).  I didn't worry about it
>> too much, as it generally would free the memory back.  I did more exhaustive
>> testing, with all 4 servers acting as clients, all 4 doing dd writes, and it
>> worked fine for awhile.  Eventually, however, one of my nodes ran out of
>> memory; perhaps that extra io-threads memory consumption is an issue after
>> all.
>>
>> Also, when the node ran out of memory, my other GlusterFS clients hung. As
>> someone mentioned previously, GlusterFS apparently doesn't give up properly
>> if the unresponsive machine is still up.  After rebooting the hung node (but
>> not yet restarting the server processes), the clients gave up on the node
>> and became responsive again.
>>
>>
> Apparently, the clients can get large, too.  One of them is ~2.9 GB. Also,
> selfheal fixed some but not all of the files.
>
>
> Thanks,
>
> Brent
>
>
> _______________________________________________
> Gluster-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gluster-devel
>



-- 
Raghavendra G

A centipede was happy quite, until a toad in fun,
Said, "Prey, which leg comes after which?",
This raised his doubts to such a pitch,
He fell flat into the ditch,
Not knowing how to run.
-Anonymous


reply via email to

[Prev in Thread] Current Thread [Next in Thread]