[Gnash-dev] I'm so sad that gnash can not run on ARM 266Mhz and MIPS 360Mhz?

[泽雷-陈杰（mp4学习机/gps方案）]

Build options 0.7.2
   Renderer: agg   GUI: fb   Sound handler: sdl   Decoder: mad
The agg version is 2.4, sdl version is 1.2, libmad version is 0.15.1

This is the mips 360Mhz 
output:

# gnash /user/swf/10_07.swf -v
00:07:18: Verbose output turned on
00:07:18: no rendering flags specified, using rcfile
00:07:18: Framebuffer device uses 262144 bytes of memory.
00:07:18: Video mode: 480x272 with 16 bits per pixel.
00:07:18: red channel: 11 / 5
00:07:18: green channel: 5 / 6
00:07:18: blue channel: 0 / 5
00:07:18: framebuffer pixel format is RGB565
00:07:18: initialized AGG buffer <0x2b6a2008>, 262144 bytes, 480x272, rowsize is 960 bytes
00:07:18: Base url set to: file:///user/swf/10_07.swf
00:07:21: Add sound sample 53

Then the lcd is white and no other apperance.
the top cmd like this:

 PID USER     STATUS   RSS  PPID %CPU %MEM COMMAND
   42 root     R       4260    41 50.9  6.9 gnash
   40 root     R       4260    26 48.6  6.9 gnash
   44 root     R        888    26  0.3  1.4 exe
   41 root     S       4260    40  0.0  6.9 gnash
   26 root     S        944     1  
0.0  1.5 sh
    1 root     S        704     0  0.0  1.1 init
   24 root     S        544     1  0.0  0.8 telnetd
   14 root     SW         0     1  0.0  0.0 rpciod
    2 root     SW         0     1  0.0  0.0 keventd
    3 root     SWN        0     1  0.0  0.0 ksoftirqd_CPU0
    4 root     SW         0     1  0.0  0.0 events/0
    5 root     SW         0     1  0.0  0.0 kswapd
    6 root     SW         0     1  0.0  0.0 bdflush
    7 root     SW         0     1  0.0  0.0 kupdated
   10 root     SW         0     1  0.0  0.0 mtdblockd
   11 root     SW         0     1  0.0  0.0 khubd


The mips cpu is 360Mhz
 cofigure arguments:
./configure --prefix=$THIRD/install/mips/gnash \
                --host=mipsel-linux \
                --disable-klash \
                --enable-gui=FB \
                --enable-renderer=Agg \
                --disable-plugin \
                --enable-jpeg \
                --disable-glext \
                --enable-sound=SDL \
                --with-mp3-decoder=mad \
                --with-x=no  \
                --with-jpeg-incl=$THIRDINC \
                --with-jpeg-lib=$THIRDLIB \
                --with-agg-incl=$THIRDINC/agg \
                --with-agg-lib=$THIRDLIB \
                --disable-xml \
                --with-boost-incl=$THIRDINC \
                --with-mad_incl=$THIRDINC \
                --with-mad-lib=$THIRDLIB \
                --with-sdl-incl=$THIRDINC/SDL \
                --with-sdl-lib=$THIRDLIB

the arm  is 266Mhz 
configure arguments:
./configure --prefix=$THIRD/install/arm/gnash \
                --host=arm-linux \
                --disable-klash \
                --enable-gui=FB \
                --enable-renderer=Agg \
                --disable-plugin \
                --enable-jpeg \
                --disable-glext \
                --enable-sound=SDL \
                --with-mp3-decoder=mad \
                --with-x=no  \
                --with-jpeg-incl=$THIRDINC \
                --with-jpeg-lib=$THIRDLIB \
                --with-agg-incl=$THIRDINC/agg \
                --with-agg-lib=$THIRDLIB \
                --disable-xml \
                --with-boost-incl=$THIRDINC \
                --with-mad_incl=$THIRDINC \
                --with-mad-lib=$THIRDLIB \
                --with-sdl-incl=$THIRDINC/SDL \
                --with-sdl-lib=$THIRDLIB


Who can tell me why?
Has anybody run gnash on your embbed device successfully?
Thank you.