[gNewSense-users] modem 3G cdma speedup 6350u

[chika]

=========
i've a new modem 3G cdma speedup 6350u...
=========
# dmesg
[   48.208441] usbcore: registered new interface driver usbserial
[   48.208484]
/nfs/.sda3/gnewsense-builder-temp-dir/linux-2.6.24/drivers/usb/serial/usb-serial.c:
USB Serial support registered for generic
[   48.208550] usbcore: registered new interface driver usbserial_generic
[   48.208555]
/nfs/.sda3/gnewsense-builder-temp-dir/linux-2.6.24/drivers/usb/serial/usb-serial.c:
USB Serial Driver core
[   48.218824]
/nfs/.sda3/gnewsense-builder-temp-dir/linux-2.6.24/drivers/usb/serial/usb-serial.c:
USB Serial support registered for airprime
[   48.218878] airprime 2-2:1.0: airprime converter detected
[   48.219067] usb 2-2: airprime converter now attached to ttyUSB0
[   48.219203] usb 2-2: airprime converter now attached to ttyUSB1
[   48.219324] usb 2-2: airprime converter now attached to ttyUSB2
[   48.219340] airprime 2-2:1.1: airprime converter detected
[   48.219471] usb 2-2: airprime converter now attached to ttyUSB3
[   48.219594] usb 2-2: airprime converter now attached to ttyUSB4
[   48.219712] usb 2-2: airprime converter now attached to ttyUSB5
[   48.219726] airprime 2-2:1.2: airprime converter detected
[   48.219891] usb 2-2: airprime converter now attached to ttyUSB6

# hope the modem works
address@hidden:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2   S3   USB0
ttyUSB1<Info>: Exec format error
Modem Port Scan<*1>: USB1
ttyUSB2<Info>: Exec format error
Modem Port Scan<*1>: USB2 USB3
ttyUSB4<Info>: Exec format error
Modem Port Scan<*1>: USB4
ttyUSB5<Info>: Exec format error
Modem Port Scan<*1>: USB5
Modem Port Scan<*1>: USB6
ttyUSB7<Info>: Exec format error
Modem Port Scan<*1>: USB7
ttyUSB8<Info>: Exec format error
Modem Port Scan<*1>: USB8

----> dmesg again #check what's wrong
[65019.355512] airprime ttyUSB0: airprime_open - failed submitting read
urb 0 for port 0, error -2
[65019.355623] airprime ttyUSB1: airprime_open - failed submitting read
urb 0 for port 1, error -8
[65019.355789] airprime ttyUSB2: airprime_open - failed submitting read
urb 0 for port 2, error -8
[65019.355912] airprime ttyUSB3: airprime_open - failed submitting read
urb 0 for port 3, error -2
[65019.356001] airprime ttyUSB4: airprime_open - failed submitting read
urb 0 for port 4, error -8
[65019.356120] airprime ttyUSB5: airprime_open - failed submitting read
urb 0 for port 5, error -8
[65019.356240] airprime ttyUSB6: airprime_open - failed submitting read
urb 0 for port 6, error -2
[65019.356340] airprime ttyUSB7: airprime_open - failed submitting read
urb 0 for port 7, error -8
[65019.356460] airprime ttyUSB8: airprime_open - failed submitting read
urb 0 for port 8, error -8

i've try on ubuntu but it works seamlessly

any reference?


--

http://www.its.ac.id