gnokii-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: FC4 + CA-42 + Nokia 2112 -- Need help with initialization parameters


From: Harsha Ramesh
Subject: Re: FC4 + CA-42 + Nokia 2112 -- Need help with initialization parameters.
Date: Sun, 27 Nov 2005 13:10:03 +0530

Hi Bozo,

I just tried out the what you suggested, but to no luck. Running gnokii --identify gives me the following error.

GNOKII Version 0.6.9
LOG: debug mask is 0x1
phone instance config:
model: AT
port_device: /dev/ttyACM0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyACM0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ            
write: [ATZ<cr>]
read : [~<cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x0007
02 7e 0d 0a 4f 4b 0d                            |  ~  OK         
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1           
write: [ATE1<cr>]
read : [ATE1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000b
02 41 54 45 31 0d 0d 0a 4f 4b 0d                |  ATE1   OK     
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1      
write: [AT+CMEE=1<cr>]
read : [AT+CMEE=1<cr><cr><lf>ERROR<cr><lf>]
Message received: 0x00 / 0x0013
03 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 45 52 52 |  AT+CMEE=1   ERR
4f 52 0d                                        | OR             
Received message type 00
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d                         | AT+CGMM        
write: [AT+CGMM<cr>]
read : [AT+CGMM<cr><cr><lf>ERROR<cr><lf>]
Message received: 0x06 / 0x0011
03 41 54 2b 43 47 4d 4d 0d 0d 0a 45 52 52 4f 52 |  AT+CGMM   ERROR
0d                                              |                
Received message type 06
Initialization failed (8)
Telephone interface init failed: Unknown error - well better than nothing!!
Quitting.

Any ideas here? Are you sure i dont need to supply the additional initialization parameters??

thanks,
Harsha

On 11/19/05, Harsha Ramesh <address@hidden> wrote:
Hi Bozo,

thanks for this information. I didnt know about it. I shall try this out and let you know the results at the earliest.

regards,
Harsha


On 11/19/05, BORBELY Zoltan <address@hidden> wrote:
Hi,

On Thu, Nov 03, 2005 at 09:37:14PM +0530, Harsha Ramesh wrote:
> Details:
> Fedora Core 4 - Kernel 2.6.14
> Nokia 2112
> CA-42 cable
> gnokii 0.6.9
>
> Issue:
>
> When i run gnokiid, i get the following output:

Why do you want to run gnokiid? gnokiid is an AT modem emulator for
old nokia models (e.g. 5110/6110) but your phone contains a native
modem.

If you want to modify contacts, send & receive messages you can use
one of the following utilities: gnokii (command line), xgnokii (gtk2
based, part of the gnokii package) or gnocky (rewritten gtk2 based
program). Please run gnokii --identify first. If you are experiencing
problems please try to run gnokii (it's much easier us to debug than
the graphical versions).

Bye,
Bozo


_______________________________________________
gnokii-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/gnokii-users



reply via email to

[Prev in Thread] Current Thread [Next in Thread]