Re: getting started with usb and n52

[Jon Berg]

Thanks for your help.

The problem was solved by using "PC suite".
Then I get AT mode and /dev/ttyACM0 to work with n52. Very exciting!

I did not get series40 mode to work:
gnokii --identify
GNOKII Version 0.6.29
Couldn't read /home/jberg/.config/gnokii/config config file.
Couldn't read /etc/xdg/gnokii/config config file.
Couldn't read /root/.gnokiirc config file.
LOG: debug mask is 0x1
Config read from file /etc/gnokiirc.
phone instance config:
model = series40
port = 1
connection = dku2libusb
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 0
Connecting
Serial device: opening device USB
Ignoring extra header, type 171, length 3
Ignoring extra header, type 253, length 4
Found FBUS interface
Can't set configuration: -16
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Serial device: closing device
Telephone interface init failed: Command timed out.
Quitting.
Command timed out.

Regards,
Jon Berg.

On Wed, Aug 18, 2010 at 11:52 PM, Pawel Kot <address@hidden> wrote:
> Hi,
>
> On Wed, Aug 18, 2010 at 23:33, Jon Berg <address@hidden> wrote:
>> I tried to get gnokii to work, I have n52 connected with usb to a
>
> n52 is series40 6th Edition so it may malfunction.
>
>> linux. I have installed gnokii by using the archlinux package.
>> The it is connected with CA-126 usb cable.
>
> [...]
>
>> I tried a basic config:
>>
>> gnokii --identify
>> GNOKII Version 0.6.29
>> Couldn't read /home/jberg/.config/gnokii/config config file.
>> Couldn't read /etc/xdg/gnokii/config config file.
>> Couldn't read /home/jberg/.gnokiirc config file.
>> LOG: debug mask is 0x1
>> Config read from file /etc/gnokiirc.
>> phone instance config:
>> model = AT
>> port = 1
>> connection = dku2libusb
>
> Please have a look at wiki. AT and dku2libusb are incompatible. For
> dku2libusb you need series40.
>
>> Then I read: http://wiki.gnokii.org/index.php/Cables
>> And tried the two configurations under DKE-2:
>> [global]
>> model = series40
>> port = 1
>> connection = dku2libusb
>
> That should actually work.
>
>> Serial device: opening device USB
>> Couldn't open PHONET device: Inappropriate ioctl for device
>
> Looks like some low lever error. Not sure now why it could occur.
>
>> Then the other, did: /bin/mknod /dev/ttyACM0 c 166 0, also tried with
>> modprobe usbserial vendor=0x421 product=0x1cd
>> is there maybe something else that needs to be done to configure
>> /dev/ttyACM0 here?
>
> This is not relevant to series40/dku2libusb. Still mknod is ancient
> way. Please see wiki for hints how to proceed.
>
>> model = AT
>> port = /dev/ttyACM0
>> connection = serial
>
> That could work also.
>
>> Serial device: opening device /dev/ttyACM0
>> Gnokii serial_open: open: No such device
>
> It means no real device is in place.
>
>> I suppose the problem is something with the connection to the phone.
>> The phone has a menu for usb connection mode: "Connect PC to Net", "PC
>> suite", "Mass storage", "Picture transfere".
>> I selected "Connect PC to Net".
>
> PC suite is the right one for series40/dku2libusb
>
> take care,
> --
> Pawel Kot
>
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users
>