|
From: | José Antonio Blanco |
Subject: | Gnokii and Nokia 6030 |
Date: | Thu, 17 Dec 2015 10:02:31 +0100 |
[global] model = 6510 port = /dev/tyUSB0 connection = dlr3pI haven't got a CA-45 cable, so I use an Arduino Mega as interface. I based the connections like this link:
[global]
port = /dev/ttyUSB0
model = 6510
initlength = default
connection = dlr3p
use_locking = no
serial_baudrate = 115200
serial_write_usleep = 10000
smsc_timeout = 10
[xgnokii]
allow_breakage = 0
[connect_script]
# Don't put your phone number here!!!
TELEPHONE = 12345678
[logging]
debug = on
rlpdebug = off
xdebug = off
linux-6n9s:/home/user # gnokii --version
GNOKII Version 0.6.31
Copyright (C) Hugh Blemings <address@hidden>, 1999, 2000
Copyright (C) Pavel Janik ml. <address@hidden>, 1999, 2000
Copyright (C) Pavel Machek <address@hidden>, 2001
Copyright (C) Pawel Kot <address@hidden>, 2001-2011
Copyright (C) BORBELY Zoltan <address@hidden>, 2002
Copyright (C) Daniele Forsi <address@hidden>, 2004-2011
gnokii is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
There is absolutely no warranty for gnokii. See GPL for details.
Built 11:14:58 Dec 13 2015
linux-6n9s:/home/user # gnokii --identify
GNOKII Version 0.6.31
LOG: debug mask is 0x1
Config read from file /etc/gnokiirc.
phone instance config:
model = 6510
port = /dev/ttyUSB0
connection = dlr3p
initlength = default
serial_baudrate = 115200
serial_write_usleep = 10000
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 0
Connecting
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Serial device: closing device
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Serial device: closing device
Error in link initialisation: 11
Telephone interface init failed: Command timed out.
Quitting.
Command timed out.
[Prev in Thread] | Current Thread | [Next in Thread] |