[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r5266 - in GNUnet: . m4 po
|
From: |
gnunet |
|
Subject: |
[GNUnet-SVN] r5266 - in GNUnet: . m4 po |
|
Date: |
Sat, 7 Jul 2007 02:47:51 -0600 (MDT) |
Author: grothoff
Date: 2007-07-07 02:47:50 -0600 (Sat, 07 Jul 2007)
New Revision: 5266
Modified:
GNUnet/INSTALL
GNUnet/bootstrap
GNUnet/configure.ac
GNUnet/m4/Makefile.in
GNUnet/po/GNUnet.pot
GNUnet/po/de.po
GNUnet/po/es.po
GNUnet/po/rw.po
GNUnet/po/sv.po
GNUnet/po/vi.po
Log:
disting
Modified: GNUnet/INSTALL
===================================================================
--- GNUnet/INSTALL 2007-07-07 08:37:03 UTC (rev 5265)
+++ GNUnet/INSTALL 2007-07-07 08:47:50 UTC (rev 5266)
@@ -1,19 +1,13 @@
-Installation Instructions
-*************************
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006 Free Software Foundation, Inc.
-
-This file is free documentation; the Free Software Foundation gives
+ This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
-Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
+ These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@@ -26,9 +20,9 @@
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
+the results of its tests to speed up reconfiguring. (Caching is
disabled by default to prevent problems with accidental use of stale
-cache files.
+cache files.)
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
@@ -38,17 +32,20 @@
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+`configure' by a program called `autoconf'. You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
- Running `configure' might take a while. While running, it prints
- some messages telling which features it is checking for.
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
2. Type `make' to compile the package.
@@ -70,49 +67,51 @@
Compilers and Options
=====================
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about. Run `./configure --help' for
-details on some of the pertinent environment variables.
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
- ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
-You can compile the package for more than one kind of computer at the
+ You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
+ If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory. After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
Installation Names
==================
-By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
+ By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
+options like `--bindir=PATH' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
@@ -123,7 +122,7 @@
Optional Features
=================
-Some packages pay attention to `--enable-FEATURE' options to
+ Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
@@ -138,11 +137,11 @@
Specifying the System Type
==========================
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
@@ -157,7 +156,7 @@
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
+use the `--target=TYPE' option to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
@@ -168,9 +167,9 @@
Sharing Defaults
================
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
@@ -179,7 +178,7 @@
Defining Variables
==================
-Variables not defined in a site shell script can be set in the
+ Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
@@ -187,18 +186,14 @@
./configure CC=/usr/local2/bin/gcc
-causes the specified `gcc' to be used as the C compiler (unless it is
+will cause the specified gcc to be used as the C compiler (unless it is
overridden in the site shell script).
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug. Until the bug is fixed you can use this workaround:
-
- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
`configure' Invocation
======================
-`configure' recognizes the following options to control how it operates.
+ `configure' recognizes the following options to control how it
+operates.
`--help'
`-h'
Modified: GNUnet/bootstrap
===================================================================
--- GNUnet/bootstrap 2007-07-07 08:37:03 UTC (rev 5265)
+++ GNUnet/bootstrap 2007-07-07 08:47:50 UTC (rev 5266)
@@ -1,7 +1,9 @@
#!/bin/sh
export WANT_AUTOMAKE="1.8"
export MKDIR_P="mkdir -p"
-automake -fi
+export AUTOMAKE="automake-1.8"
+export ACLOCAL="aclocal-1.8"
+automake-1.8 -fi
cd libltdl
autoreconf -f -i
cd ..
Modified: GNUnet/configure.ac
===================================================================
--- GNUnet/configure.ac 2007-07-07 08:37:03 UTC (rev 5265)
+++ GNUnet/configure.ac 2007-07-07 08:47:50 UTC (rev 5266)
@@ -367,6 +367,7 @@
fi
fi
AM_CONDITIONAL(HAVE_MYSQL, test x$mysql = xtrue)
+AM_CONDITIONAL(HAVE_MYSQLE, test "0" = "1")
LDFLAGS=$SAVE_LDFLAGS
CPPFLAGS=$SAVE_CPPFLAGS
@@ -597,7 +598,7 @@
AC_CHECK_LIB([guile], [scm_sigaction_for_thread],
guile=1))])
-if test "$guile" == 1
+if test "$guile" = 1
then
AC_CHECK_LIB([guile], [scm_init_guile], [],
AC_MSG_ERROR([Guile doesn't provide scm_init_guile(). Please report to
address@hidden))
Modified: GNUnet/m4/Makefile.in
===================================================================
--- GNUnet/m4/Makefile.in 2007-07-07 08:37:03 UTC (rev 5265)
+++ GNUnet/m4/Makefile.in 2007-07-07 08:47:50 UTC (rev 5266)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2003, 2004 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -13,11 +13,15 @@
# PARTICULAR PURPOSE.
@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -29,7 +33,6 @@
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_triplet = @build@
host_triplet = @host@
subdir = m4
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ChangeLog
@@ -48,12 +51,12 @@
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
-depcomp =
-am__depfiles_maybe =
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
@@ -64,6 +67,8 @@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
+CONVENIENCE_LTDL_FALSE = @CONVENIENCE_LTDL_FALSE@
+CONVENIENCE_LTDL_TRUE = @CONVENIENCE_LTDL_TRUE@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
@@ -71,6 +76,8 @@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
+CYGWIN_FALSE = @CYGWIN_FALSE@
+CYGWIN_TRUE = @CYGWIN_TRUE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
@@ -90,8 +97,31 @@
GREP = @GREP@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_LIBS = @GTK_LIBS@
-INSTALL = @INSTALL@
+HAVE_ADNS_FALSE = @HAVE_ADNS_FALSE@
+HAVE_ADNS_TRUE = @HAVE_ADNS_TRUE@
+HAVE_DIALOG_FALSE = @HAVE_DIALOG_FALSE@
+HAVE_DIALOG_TRUE = @HAVE_DIALOG_TRUE@
+HAVE_GTK_FALSE = @HAVE_GTK_FALSE@
+HAVE_GTK_TRUE = @HAVE_GTK_TRUE@
+HAVE_GUILE_FALSE = @HAVE_GUILE_FALSE@
+HAVE_GUILE_TRUE = @HAVE_GUILE_TRUE@
+HAVE_IPV6_FALSE = @HAVE_IPV6_FALSE@
+HAVE_IPV6_TRUE = @HAVE_IPV6_TRUE@
+HAVE_MHD_FALSE = @HAVE_MHD_FALSE@
+HAVE_MHD_TRUE = @HAVE_MHD_TRUE@
+HAVE_MYSQLE_FALSE = @HAVE_MYSQLE_FALSE@
+HAVE_MYSQLE_TRUE = @HAVE_MYSQLE_TRUE@
+HAVE_MYSQL_FALSE = @HAVE_MYSQL_FALSE@
+HAVE_MYSQL_TRUE = @HAVE_MYSQL_TRUE@
+HAVE_SQLITE_FALSE = @HAVE_SQLITE_FALSE@
+HAVE_SQLITE_TRUE = @HAVE_SQLITE_TRUE@
+HAVE_XML2_FALSE = @HAVE_XML2_FALSE@
+HAVE_XML2_TRUE = @HAVE_XML2_TRUE@
+HAVE_ZLIB_FALSE = @HAVE_ZLIB_FALSE@
+HAVE_ZLIB_TRUE = @HAVE_ZLIB_TRUE@
INSTALL_DATA = @INSTALL_DATA@
+INSTALL_LTDL_FALSE = @INSTALL_LTDL_FALSE@
+INSTALL_LTDL_TRUE = @INSTALL_LTDL_TRUE@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
@@ -109,13 +139,18 @@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
+LINUX_FALSE = @LINUX_FALSE@
+LINUX_TRUE = @LINUX_TRUE@
LN_S = @LN_S@
LTDLINCL = @LTDLINCL@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
+MACOSX_FALSE = @MACOSX_FALSE@
+MACOSX_TRUE = @MACOSX_TRUE@
MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
+MINGW_FALSE = @MINGW_FALSE@
+MINGW_TRUE = @MINGW_TRUE@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
@@ -123,6 +158,8 @@
MYSQL_LDFLAGS = @MYSQL_LDFLAGS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OPENBSD_FALSE = @OPENBSD_FALSE@
+OPENBSD_TRUE = @OPENBSD_TRUE@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
@@ -135,35 +172,36 @@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
+SOLARIS_FALSE = @SOLARIS_FALSE@
+SOLARIS_TRUE = @SOLARIS_TRUE@
SQLITE_CPPFLAGS = @SQLITE_CPPFLAGS@
SQLITE_LDFLAGS = @SQLITE_LDFLAGS@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
+XFREEBSD_FALSE = @XFREEBSD_FALSE@
+XFREEBSD_TRUE = @XFREEBSD_TRUE@
XGETTEXT = @XGETTEXT@
XML2_CONFIG = @XML2_CONFIG@
XML_CPPFLAGS = @XML_CPPFLAGS@
XML_LIBS = @XML_LIBS@
_libcurl_config = @_libcurl_config@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
-builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
@@ -191,12 +229,9 @@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
EXTRA_DIST = glibc2.m4 intl.m4 intldir.m4 lock.m4 visibility.m4 \
codeset.m4 \
freetype2.m4\
@@ -248,9 +283,9 @@
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps
m4/Makefile'; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile'; \
cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu --ignore-deps m4/Makefile
+ $(AUTOMAKE) --gnu m4/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
@@ -274,6 +309,10 @@
clean-libtool:
-rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool
+uninstall-info-am:
tags: TAGS
TAGS:
@@ -282,21 +321,22 @@
distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
@@ -330,7 +370,7 @@
clean-generic:
distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@@ -341,7 +381,7 @@
distclean: distclean-am
-rm -f Makefile
-distclean-am: clean-am distclean-generic
+distclean-am: clean-am distclean-generic distclean-libtool
dvi: dvi-am
@@ -355,20 +395,12 @@
install-data-am:
-install-dvi: install-dvi-am
-
install-exec-am:
-install-html: install-html-am
-
install-info: install-info-am
install-man:
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -387,20 +419,17 @@
ps-am:
-uninstall-am:
+uninstall-am: uninstall-info-am
-.MAKE: install-am install-strip
-
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
distclean distclean-generic distclean-libtool distdir dvi \
dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
+ install-data install-data-am install-exec install-exec-am \
+ install-info install-info-am install-man install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+ uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
Modified: GNUnet/po/GNUnet.pot
===================================================================
--- GNUnet/po/GNUnet.pot 2007-07-07 08:37:03 UTC (rev 5265)
+++ GNUnet/po/GNUnet.pot 2007-07-07 08:47:50 UTC (rev 5266)
@@ -8,7 +8,7 @@
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: address@hidden"
-"POT-Creation-Date: 2007-07-06 23:12-0600\n"
+"POT-Creation-Date: 2007-07-07 02:38-0600\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <address@hidden>\n"
"Language-Team: LANGUAGE <address@hidden>\n"
@@ -462,7 +462,7 @@
msgstr ""
#: src/applications/advertising/advertising.c:850
-#: src/applications/pingpong/pingpong.c:516
+#: src/applications/pingpong/pingpong.c:520
msgid "# plaintext PING messages sent"
msgstr ""
@@ -484,7 +484,7 @@
#: src/applications/pingpong/pingpong.c:128
#: src/applications/pingpong/pingpong.c:199
#: src/applications/pingpong/pingpong.c:264
-#: src/applications/pingpong/pingpong.c:335
+#: src/applications/pingpong/pingpong.c:337
#, c-format
msgid "Received malformed `%s' message. Dropping.\n"
msgstr ""
@@ -497,52 +497,52 @@
msgid "Received PING not destined for us!\n"
msgstr ""
-#: src/applications/pingpong/pingpong.c:308
-#: src/applications/pingpong/pingpong.c:371
+#: src/applications/pingpong/pingpong.c:309
+#: src/applications/pingpong/pingpong.c:374
msgid ""
"Could not match PONG against any PING. Try increasing MAX_PING_PONG "
"constant.\n"
msgstr ""
-#: src/applications/pingpong/pingpong.c:414
+#: src/applications/pingpong/pingpong.c:418
msgid "Cannot create PING, table full. Try increasing MAX_PING_PONG.\n"
msgstr ""
-#: src/applications/pingpong/pingpong.c:506
+#: src/applications/pingpong/pingpong.c:510
msgid "# encrypted PONG messages received"
msgstr ""
-#: src/applications/pingpong/pingpong.c:508
+#: src/applications/pingpong/pingpong.c:512
msgid "# plaintext PONG messages received"
msgstr ""
-#: src/applications/pingpong/pingpong.c:510
+#: src/applications/pingpong/pingpong.c:514
msgid "# encrypted PING messages received"
msgstr ""
-#: src/applications/pingpong/pingpong.c:512
+#: src/applications/pingpong/pingpong.c:516
msgid "# PING messages created"
msgstr ""
-#: src/applications/pingpong/pingpong.c:514
+#: src/applications/pingpong/pingpong.c:518
#: src/applications/session/connect.c:931
msgid "# encrypted PONG messages sent"
msgstr ""
-#: src/applications/pingpong/pingpong.c:518
+#: src/applications/pingpong/pingpong.c:522
#: src/applications/session/connect.c:929
msgid "# encrypted PING messages sent"
msgstr ""
-#: src/applications/pingpong/pingpong.c:520
+#: src/applications/pingpong/pingpong.c:524
msgid "# plaintext PONG messages sent"
msgstr ""
-#: src/applications/pingpong/pingpong.c:522
+#: src/applications/pingpong/pingpong.c:526
msgid "# plaintext PONG transmissions failed"
msgstr ""
-#: src/applications/pingpong/pingpong.c:532
+#: src/applications/pingpong/pingpong.c:536
#, c-format
msgid "`%s' registering handlers %d %d (plaintext and ciphertext)\n"
msgstr ""
Modified: GNUnet/po/de.po
===================================================================
--- GNUnet/po/de.po 2007-07-07 08:37:03 UTC (rev 5265)
+++ GNUnet/po/de.po 2007-07-07 08:47:50 UTC (rev 5266)
@@ -7,7 +7,7 @@
msgstr ""
"Project-Id-Version: GNUnet 0.7.0b\n"
"Report-Msgid-Bugs-To: address@hidden"
-"POT-Creation-Date: 2007-07-06 23:12-0600\n"
+"POT-Creation-Date: 2007-07-07 02:38-0600\n"
"PO-Revision-Date: 2006-03-17 21:37+0100\n"
"Last-Translator: Nils Durner <address@hidden>\n"
"Language-Team: German <address@hidden>\n"
@@ -513,7 +513,7 @@
msgstr "# Bekanntmachungen von anderen übertragen"
#: src/applications/advertising/advertising.c:850
-#: src/applications/pingpong/pingpong.c:516
+#: src/applications/pingpong/pingpong.c:520
msgid "# plaintext PING messages sent"
msgstr "# Klartext PING Nachrichten gesendet"
@@ -537,7 +537,7 @@
#: src/applications/pingpong/pingpong.c:128
#: src/applications/pingpong/pingpong.c:199
#: src/applications/pingpong/pingpong.c:264
-#: src/applications/pingpong/pingpong.c:335
+#: src/applications/pingpong/pingpong.c:337
#, c-format
msgid "Received malformed `%s' message. Dropping.\n"
msgstr "Beschädigte `%s' Nachricht empfangen. Nachricht wird verworfen.\n"
@@ -550,8 +550,8 @@
msgid "Received PING not destined for us!\n"
msgstr "Empfangener PING ist nicht an uns gerichtet!\n"
-#: src/applications/pingpong/pingpong.c:308
-#: src/applications/pingpong/pingpong.c:371
+#: src/applications/pingpong/pingpong.c:309
+#: src/applications/pingpong/pingpong.c:374
msgid ""
"Could not match PONG against any PING. Try increasing MAX_PING_PONG "
"constant.\n"
@@ -559,49 +559,49 @@
"PONG konnte keinem PING zugeordnet werden. Versuchen Sie die Konstante "
"MAX_PING_PONG hochzusetzen.\n"
-#: src/applications/pingpong/pingpong.c:414
+#: src/applications/pingpong/pingpong.c:418
msgid "Cannot create PING, table full. Try increasing MAX_PING_PONG.\n"
msgstr ""
"PING konnte nicht erstellt werden, da die Tabelle voll ist. Versuchen Sie, "
"die Konstante MAX_PING_PONG hochzusetzen.\n"
-#: src/applications/pingpong/pingpong.c:506
+#: src/applications/pingpong/pingpong.c:510
msgid "# encrypted PONG messages received"
msgstr "# verschlüsselter PONG Nachrichten empfangen"
-#: src/applications/pingpong/pingpong.c:508
+#: src/applications/pingpong/pingpong.c:512
msgid "# plaintext PONG messages received"
msgstr "# Klartext PONG Nachrichten empfangen"
-#: src/applications/pingpong/pingpong.c:510
+#: src/applications/pingpong/pingpong.c:514
msgid "# encrypted PING messages received"
msgstr "# verschlüsselter PING Nachrichten empfangen"
-#: src/applications/pingpong/pingpong.c:512
+#: src/applications/pingpong/pingpong.c:516
msgid "# PING messages created"
msgstr "# PING Nachrichten erstellt"
-#: src/applications/pingpong/pingpong.c:514
+#: src/applications/pingpong/pingpong.c:518
#: src/applications/session/connect.c:931
msgid "# encrypted PONG messages sent"
msgstr "# verschlüsselter PONG Nachrichten gesendet"
-#: src/applications/pingpong/pingpong.c:518
+#: src/applications/pingpong/pingpong.c:522
#: src/applications/session/connect.c:929
msgid "# encrypted PING messages sent"
msgstr "# verschlüsselter PING Nachrichten gesendet"
-#: src/applications/pingpong/pingpong.c:520
+#: src/applications/pingpong/pingpong.c:524
#, fuzzy
msgid "# plaintext PONG messages sent"
msgstr "# Klartext PING Nachrichten gesendet"
-#: src/applications/pingpong/pingpong.c:522
+#: src/applications/pingpong/pingpong.c:526
#, fuzzy
msgid "# plaintext PONG transmissions failed"
msgstr "# Klartext PONG Nachrichten empfangen"
-#: src/applications/pingpong/pingpong.c:532
+#: src/applications/pingpong/pingpong.c:536
#, c-format
msgid "`%s' registering handlers %d %d (plaintext and ciphertext)\n"
msgstr "`%s' registriert Handler %d %d (Plaintext und Ciphertext)\n"
Modified: GNUnet/po/es.po
===================================================================
--- GNUnet/po/es.po 2007-07-07 08:37:03 UTC (rev 5265)
+++ GNUnet/po/es.po 2007-07-07 08:47:50 UTC (rev 5266)
@@ -9,7 +9,7 @@
msgstr ""
"Project-Id-Version: GNUnet 0.7.0e\n"
"Report-Msgid-Bugs-To: address@hidden"
-"POT-Creation-Date: 2007-07-06 23:12-0600\n"
+"POT-Creation-Date: 2007-07-07 02:38-0600\n"
"PO-Revision-Date: 2006-06-29 12:05+0200\n"
"Last-Translator: Miguel Angel Arruga <address@hidden>\n"
"Language-Team: Spanish\n"
@@ -491,7 +491,7 @@
msgstr "# Anuncios a extraños mandados"
#: src/applications/advertising/advertising.c:850
-#: src/applications/pingpong/pingpong.c:516
+#: src/applications/pingpong/pingpong.c:520
msgid "# plaintext PING messages sent"
msgstr "# mensajes de texto mandados por PING"
@@ -514,7 +514,7 @@
#: src/applications/pingpong/pingpong.c:128
#: src/applications/pingpong/pingpong.c:199
#: src/applications/pingpong/pingpong.c:264
-#: src/applications/pingpong/pingpong.c:335
+#: src/applications/pingpong/pingpong.c:337
#, c-format
msgid "Received malformed `%s' message. Dropping.\n"
msgstr "Recibido el mensaje '%s' con un mal formato. Omitiendo.\n"
@@ -527,54 +527,54 @@
msgid "Received PING not destined for us!\n"
msgstr "¡Recibido PING no destinado a nosotros!\n"
-#: src/applications/pingpong/pingpong.c:308
-#: src/applications/pingpong/pingpong.c:371
+#: src/applications/pingpong/pingpong.c:309
+#: src/applications/pingpong/pingpong.c:374
msgid ""
"Could not match PONG against any PING. Try increasing MAX_PING_PONG "
"constant.\n"
msgstr ""
-#: src/applications/pingpong/pingpong.c:414
+#: src/applications/pingpong/pingpong.c:418
msgid "Cannot create PING, table full. Try increasing MAX_PING_PONG.\n"
msgstr ""
-#: src/applications/pingpong/pingpong.c:506
+#: src/applications/pingpong/pingpong.c:510
msgid "# encrypted PONG messages received"
msgstr "# mensajes PONG encriptados recibidos"
-#: src/applications/pingpong/pingpong.c:508
+#: src/applications/pingpong/pingpong.c:512
msgid "# plaintext PONG messages received"
msgstr ""
-#: src/applications/pingpong/pingpong.c:510
+#: src/applications/pingpong/pingpong.c:514
msgid "# encrypted PING messages received"
msgstr ""
-#: src/applications/pingpong/pingpong.c:512
+#: src/applications/pingpong/pingpong.c:516
msgid "# PING messages created"
msgstr ""
-#: src/applications/pingpong/pingpong.c:514
+#: src/applications/pingpong/pingpong.c:518
#: src/applications/session/connect.c:931
msgid "# encrypted PONG messages sent"
msgstr ""
-#: src/applications/pingpong/pingpong.c:518
+#: src/applications/pingpong/pingpong.c:522
#: src/applications/session/connect.c:929
msgid "# encrypted PING messages sent"
msgstr ""
-#: src/applications/pingpong/pingpong.c:520
+#: src/applications/pingpong/pingpong.c:524
#, fuzzy
msgid "# plaintext PONG messages sent"
msgstr "# mensajes de texto mandados por PING"
-#: src/applications/pingpong/pingpong.c:522
+#: src/applications/pingpong/pingpong.c:526
#, fuzzy
msgid "# plaintext PONG transmissions failed"
msgstr "# mensajes de texto mandados por PING"
-#: src/applications/pingpong/pingpong.c:532
+#: src/applications/pingpong/pingpong.c:536
#, c-format
msgid "`%s' registering handlers %d %d (plaintext and ciphertext)\n"
msgstr "'%s' registrando manejadores %d %d (texto plano e hipertexto)\n"
Modified: GNUnet/po/rw.po
===================================================================
--- GNUnet/po/rw.po 2007-07-07 08:37:03 UTC (rev 5265)
+++ GNUnet/po/rw.po 2007-07-07 08:47:50 UTC (rev 5266)
@@ -16,7 +16,7 @@
msgstr ""
"Project-Id-Version: GNUnet 0.7.0pre0\n"
"Report-Msgid-Bugs-To: address@hidden"
-"POT-Creation-Date: 2007-07-06 23:12-0600\n"
+"POT-Creation-Date: 2007-07-07 02:38-0600\n"
"PO-Revision-Date: 2005-04-04 10:55-0700\n"
"Last-Translator: Steven Michael Murphy <address@hidden>\n"
"Language-Team: Kinyarwanda <address@hidden>\n"
@@ -553,7 +553,7 @@
msgstr ""
#: src/applications/advertising/advertising.c:850
-#: src/applications/pingpong/pingpong.c:516
+#: src/applications/pingpong/pingpong.c:520
msgid "# plaintext PING messages sent"
msgstr ""
@@ -575,7 +575,7 @@
#: src/applications/pingpong/pingpong.c:128
#: src/applications/pingpong/pingpong.c:199
#: src/applications/pingpong/pingpong.c:264
-#: src/applications/pingpong/pingpong.c:335
+#: src/applications/pingpong/pingpong.c:337
#, fuzzy, c-format
msgid "Received malformed `%s' message. Dropping.\n"
msgstr "Ubutumwa"
@@ -590,60 +590,60 @@
msgid "Received PING not destined for us!\n"
msgstr "OYA kugirango RW"
-#: src/applications/pingpong/pingpong.c:308
-#: src/applications/pingpong/pingpong.c:371
+#: src/applications/pingpong/pingpong.c:309
+#: src/applications/pingpong/pingpong.c:374
msgid ""
"Could not match PONG against any PING. Try increasing MAX_PING_PONG "
"constant.\n"
msgstr ""
-#: src/applications/pingpong/pingpong.c:414
+#: src/applications/pingpong/pingpong.c:418
msgid "Cannot create PING, table full. Try increasing MAX_PING_PONG.\n"
msgstr ""
-#: src/applications/pingpong/pingpong.c:506
+#: src/applications/pingpong/pingpong.c:510
#, fuzzy
msgid "# encrypted PONG messages received"
msgstr "#Bayite Bya BYAKIRIWE"
-#: src/applications/pingpong/pingpong.c:508
+#: src/applications/pingpong/pingpong.c:512
#, fuzzy
msgid "# plaintext PONG messages received"
msgstr "#Umukiriya Ibibazo BYAKIRIWE"
-#: src/applications/pingpong/pingpong.c:510
+#: src/applications/pingpong/pingpong.c:514
#, fuzzy
msgid "# encrypted PING messages received"
msgstr "#Bayite Bya BYAKIRIWE"
-#: src/applications/pingpong/pingpong.c:512
+#: src/applications/pingpong/pingpong.c:516
#, fuzzy
msgid "# PING messages created"
msgstr "#Ubutumwa"
-#: src/applications/pingpong/pingpong.c:514
+#: src/applications/pingpong/pingpong.c:518
#: src/applications/session/connect.c:931
#, fuzzy
msgid "# encrypted PONG messages sent"
msgstr "#Bishunzwe: Bayite Yoherejwe:"
-#: src/applications/pingpong/pingpong.c:518
+#: src/applications/pingpong/pingpong.c:522
#: src/applications/session/connect.c:929
#, fuzzy
msgid "# encrypted PING messages sent"
msgstr "#Bishunzwe: Bayite Yoherejwe:"
-#: src/applications/pingpong/pingpong.c:520
+#: src/applications/pingpong/pingpong.c:524
#, fuzzy
msgid "# plaintext PONG messages sent"
msgstr "#Umukiriya Ibibazo BYAKIRIWE"
-#: src/applications/pingpong/pingpong.c:522
+#: src/applications/pingpong/pingpong.c:526
#, fuzzy
msgid "# plaintext PONG transmissions failed"
msgstr "#Umukiriya Ibibazo BYAKIRIWE"
-#: src/applications/pingpong/pingpong.c:532
+#: src/applications/pingpong/pingpong.c:536
#, c-format
msgid "`%s' registering handlers %d %d (plaintext and ciphertext)\n"
msgstr ""
Modified: GNUnet/po/sv.po
===================================================================
--- GNUnet/po/sv.po 2007-07-07 08:37:03 UTC (rev 5265)
+++ GNUnet/po/sv.po 2007-07-07 08:47:50 UTC (rev 5266)
@@ -7,7 +7,7 @@
msgstr ""
"Project-Id-Version: GNUnet 0.7.0b\n"
"Report-Msgid-Bugs-To: address@hidden"
-"POT-Creation-Date: 2007-07-06 23:12-0600\n"
+"POT-Creation-Date: 2007-07-07 02:38-0600\n"
"PO-Revision-Date: 2006-01-21 17:16+0100\n"
"Last-Translator: Daniel Nylander <address@hidden>\n"
"Language-Team: Swedish <address@hidden>\n"
@@ -478,7 +478,7 @@
msgstr ""
#: src/applications/advertising/advertising.c:850
-#: src/applications/pingpong/pingpong.c:516
+#: src/applications/pingpong/pingpong.c:520
msgid "# plaintext PING messages sent"
msgstr "# PING-meddelanden i klartext skickade"
@@ -500,7 +500,7 @@
#: src/applications/pingpong/pingpong.c:128
#: src/applications/pingpong/pingpong.c:199
#: src/applications/pingpong/pingpong.c:264
-#: src/applications/pingpong/pingpong.c:335
+#: src/applications/pingpong/pingpong.c:337
#, c-format
msgid "Received malformed `%s' message. Dropping.\n"
msgstr ""
@@ -513,54 +513,54 @@
msgid "Received PING not destined for us!\n"
msgstr "Mottog PING som ej var ämnat för oss!\n"
-#: src/applications/pingpong/pingpong.c:308
-#: src/applications/pingpong/pingpong.c:371
+#: src/applications/pingpong/pingpong.c:309
+#: src/applications/pingpong/pingpong.c:374
msgid ""
"Could not match PONG against any PING. Try increasing MAX_PING_PONG "
"constant.\n"
msgstr ""
-#: src/applications/pingpong/pingpong.c:414
+#: src/applications/pingpong/pingpong.c:418
msgid "Cannot create PING, table full. Try increasing MAX_PING_PONG.\n"
msgstr "Kan inte skapa PING, tabell är full. Försök att öka MAX_PING_PONG.\n"
-#: src/applications/pingpong/pingpong.c:506
+#: src/applications/pingpong/pingpong.c:510
msgid "# encrypted PONG messages received"
msgstr "# krypterade PONG-meddelanden mottagna"
-#: src/applications/pingpong/pingpong.c:508
+#: src/applications/pingpong/pingpong.c:512
msgid "# plaintext PONG messages received"
msgstr "# klartext PONG-meddelanden mottagna"
-#: src/applications/pingpong/pingpong.c:510
+#: src/applications/pingpong/pingpong.c:514
msgid "# encrypted PING messages received"
msgstr "# krypterade PING-meddelanden mottagna"
-#: src/applications/pingpong/pingpong.c:512
+#: src/applications/pingpong/pingpong.c:516
msgid "# PING messages created"
msgstr "# PING-meddelanden skapade"
-#: src/applications/pingpong/pingpong.c:514
+#: src/applications/pingpong/pingpong.c:518
#: src/applications/session/connect.c:931
msgid "# encrypted PONG messages sent"
msgstr "# krypterade PONG-meddelanden skickade"
-#: src/applications/pingpong/pingpong.c:518
+#: src/applications/pingpong/pingpong.c:522
#: src/applications/session/connect.c:929
msgid "# encrypted PING messages sent"
msgstr "# krypterade PING-meddelanden skickade"
-#: src/applications/pingpong/pingpong.c:520
+#: src/applications/pingpong/pingpong.c:524
#, fuzzy
msgid "# plaintext PONG messages sent"
msgstr "# PING-meddelanden i klartext skickade"
-#: src/applications/pingpong/pingpong.c:522
+#: src/applications/pingpong/pingpong.c:526
#, fuzzy
msgid "# plaintext PONG transmissions failed"
msgstr "# klartext PONG-meddelanden mottagna"
-#: src/applications/pingpong/pingpong.c:532
+#: src/applications/pingpong/pingpong.c:536
#, c-format
msgid "`%s' registering handlers %d %d (plaintext and ciphertext)\n"
msgstr "\"%s\" registrerar handtag %d %d (klartext och kryptotext)\n"
Modified: GNUnet/po/vi.po
===================================================================
--- GNUnet/po/vi.po 2007-07-07 08:37:03 UTC (rev 5265)
+++ GNUnet/po/vi.po 2007-07-07 08:47:50 UTC (rev 5266)
@@ -6,7 +6,7 @@
msgstr ""
"Project-Id-Version: GNUnet 0.7.0pre4\n"
"Report-Msgid-Bugs-To: address@hidden"
-"POT-Creation-Date: 2007-07-06 23:12-0600\n"
+"POT-Creation-Date: 2007-07-07 02:38-0600\n"
"PO-Revision-Date: 2005-07-05 21:18+0400\n"
"Last-Translator: Phan Vinh Thinh <address@hidden>\n"
"Language-Team: Vietnamese <address@hidden>\n"
@@ -500,7 +500,7 @@
msgstr "# Đã chuyển tiếp quàng cáo ngoài"
#: src/applications/advertising/advertising.c:850
-#: src/applications/pingpong/pingpong.c:516
+#: src/applications/pingpong/pingpong.c:520
msgid "# plaintext PING messages sent"
msgstr "# đã gửi các thông báo PING dạng văn bản thông thường"
@@ -523,7 +523,7 @@
#: src/applications/pingpong/pingpong.c:128
#: src/applications/pingpong/pingpong.c:199
#: src/applications/pingpong/pingpong.c:264
-#: src/applications/pingpong/pingpong.c:335
+#: src/applications/pingpong/pingpong.c:337
#, fuzzy, c-format
msgid "Received malformed `%s' message. Dropping.\n"
msgstr "Nhận được thông báo '%s' hỏng. Đang bỏ đi.\n"
@@ -536,8 +536,8 @@
msgid "Received PING not destined for us!\n"
msgstr "Nhận được PING không dành cho chúng ta!\n"
-#: src/applications/pingpong/pingpong.c:308
-#: src/applications/pingpong/pingpong.c:371
+#: src/applications/pingpong/pingpong.c:309
+#: src/applications/pingpong/pingpong.c:374
msgid ""
"Could not match PONG against any PING. Try increasing MAX_PING_PONG "
"constant.\n"
@@ -545,47 +545,47 @@
"Không tương ứng được PONG đối với bất kỳ PING. Hãy thử tăng hằng số "
"MAX_PING_PONG.\n"
-#: src/applications/pingpong/pingpong.c:414
+#: src/applications/pingpong/pingpong.c:418
msgid "Cannot create PING, table full. Try increasing MAX_PING_PONG.\n"
msgstr "Không tạo được PING, bảng đầy. Hãy thử tăng MAX_PING_PONG.\n"
-#: src/applications/pingpong/pingpong.c:506
+#: src/applications/pingpong/pingpong.c:510
msgid "# encrypted PONG messages received"
msgstr "# nhận được thông báo PONG đã mã hóa"
-#: src/applications/pingpong/pingpong.c:508
+#: src/applications/pingpong/pingpong.c:512
msgid "# plaintext PONG messages received"
msgstr "# nhận được thông báo PONG dạng văn bản thường"
-#: src/applications/pingpong/pingpong.c:510
+#: src/applications/pingpong/pingpong.c:514
msgid "# encrypted PING messages received"
msgstr "# nhận được thông báo PING đã mã hóa"
-#: src/applications/pingpong/pingpong.c:512
+#: src/applications/pingpong/pingpong.c:516
msgid "# PING messages created"
msgstr "# đã tạo tin nhắn PING"
-#: src/applications/pingpong/pingpong.c:514
+#: src/applications/pingpong/pingpong.c:518
#: src/applications/session/connect.c:931
msgid "# encrypted PONG messages sent"
msgstr "# đã gửi thông báo PONG đã mã hóa"
-#: src/applications/pingpong/pingpong.c:518
+#: src/applications/pingpong/pingpong.c:522
#: src/applications/session/connect.c:929
msgid "# encrypted PING messages sent"
msgstr "# đã gửi các thông báo PING mã hóa"
-#: src/applications/pingpong/pingpong.c:520
+#: src/applications/pingpong/pingpong.c:524
#, fuzzy
msgid "# plaintext PONG messages sent"
msgstr "# đã gửi các thông báo PING dạng văn bản thông thường"
-#: src/applications/pingpong/pingpong.c:522
+#: src/applications/pingpong/pingpong.c:526
#, fuzzy
msgid "# plaintext PONG transmissions failed"
msgstr "# nhận được thông báo PONG dạng văn bản thường"
-#: src/applications/pingpong/pingpong.c:532
+#: src/applications/pingpong/pingpong.c:536
#, fuzzy, c-format
msgid "`%s' registering handlers %d %d (plaintext and ciphertext)\n"
msgstr ""
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r5266 - in GNUnet: . m4 po,
gnunet <=