[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r22975 - gnunet-planetlab/gplmt/contrib
|
From: |
gnunet |
|
Subject: |
[GNUnet-SVN] r22975 - gnunet-planetlab/gplmt/contrib |
|
Date: |
Mon, 30 Jul 2012 13:58:01 +0200 |
Author: wachs
Date: 2012-07-30 13:58:01 +0200 (Mon, 30 Jul 2012)
New Revision: 22975
Modified:
gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml
Log:
- correct ids for start index
Modified: gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml
===================================================================
--- gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml 2012-07-30
11:48:38 UTC (rev 22974)
+++ gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml 2012-07-30
11:58:01 UTC (rev 22975)
@@ -13,7 +13,7 @@
<sequence enabled="true">
<!-- Install buildtools -->
- <run id="1" name="Install dependencies with yum : gcc">
+ <run id="11" name="Install dependencies with yum : gcc">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>gcc</arguments>
<timeout>0</timeout>
@@ -21,7 +21,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Install dependencies with yum : make">
+ <run id="12" name="Install dependencies with yum : make">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>make</arguments>
<timeout>0</timeout>
@@ -29,7 +29,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Install dependencies with yum : automake">
+ <run id="13" name="Install dependencies with yum : automake">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>automake</arguments>
<timeout>0</timeout>
@@ -37,7 +37,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Install dependencies with yum : autoconf">
+ <run id="14" name="Install dependencies with yum : autoconf">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>autoconf</arguments>
<timeout>0</timeout>
@@ -45,7 +45,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Install dependencies with yum : gettext-devel">
+ <run id="15" name="Install dependencies with yum : gettext-devel">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>gettext-devel</arguments>
<timeout>0</timeout>
@@ -53,7 +53,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Install dependencies with yum : texinfo">
+ <run id="16" name="Install dependencies with yum : texinfo">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>texinfo</arguments>
<timeout>0</timeout>
@@ -61,7 +61,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Install dependencies with yum : zlib-devel">
+ <run id="17" name="Install dependencies with yum : zlib-devel">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>zlib-devel</arguments>
<timeout>0</timeout>
@@ -73,7 +73,7 @@
<sequence enabled="true">
<!-- Install dependencies -->
- <run id="1" name="Install dependencies with yum : gnutls-devel">
+ <run id="21" name="Install dependencies with yum : gnutls-devel">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>gnutls-devel</arguments>
<timeout>0</timeout>
@@ -81,7 +81,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Install dependencies with yum : libgcrypt-devel">
+ <run id="22" name="Install dependencies with yum : libgcrypt-devel">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>libgcrypt-devel</arguments>
<timeout>0</timeout>
@@ -89,7 +89,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Install dependencies with yum : sqlite-devel">
+ <run id="23 name="Install dependencies with yum : sqlite-devel">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>sqlite-devel</arguments>
<timeout>0</timeout>
@@ -97,7 +97,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Install dependencies with yum : postgresql-devel">
+ <run id="24" name="Install dependencies with yum : postgresql-devel">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>postgresql-devel</arguments>
<timeout>0</timeout>
@@ -105,7 +105,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Install dependencies with yum : mysql-devel">
+ <run id="25" name="Install dependencies with yum : mysql-devel">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>mysql-devel</arguments>
<timeout>0</timeout>
@@ -113,7 +113,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Install dependencies with yum : libgsf-devel">
+ <run id="26" name="Install dependencies with yum : libgsf-devel">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>libgsf-devel</arguments>
<timeout>0</timeout>
@@ -121,7 +121,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Install dependencies with yum : libvorbis-devel">
+ <run id="27" name="Install dependencies with yum : libvorbis-devel">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>libvorbis-devel</arguments>
<timeout>0</timeout>
@@ -133,7 +133,7 @@
<sequence enabled="true">
<!-- Setup subversion -->
- <run id="1" name="Install dependencies with yum : subversion">
+ <run id="30" name="Install dependencies with yum : subversion">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>subversion</arguments>
<timeout>0</timeout>
@@ -141,7 +141,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Download GNUnet svn certificate">
+ <run id="31" name="Download GNUnet svn certificate">
<command>wget --no-check-certificate</command>
<arguments>https://gnunet.org/svn/gnunet-planetlab/gplmt/contrib/gnunet-svn-cert</arguments>
<timeout>0</timeout>
@@ -149,7 +149,7 @@
<expected_output></expected_output>
<stop_on_fail>false</stop_on_fail>
</run>
- <run id="1" name="Install GNUnet svn certificate">
+ <run id="32" name="Install GNUnet svn certificate">
<command>mkdir .subversion; mkdir .subversion/auth; mkdir
.subversion/auth/svn.ssl.server; cp gnunet-svn-cert
.subversion/auth/svn.ssl.server/2bd0c10624fe8b217987bb45f1ec55bf</command>
<arguments></arguments>
<timeout>0</timeout>
@@ -163,7 +163,7 @@
<!-- Install depencies from source -->
<sequence enabled="true">
<!-- Install libtool -->
- <run id="1" name="Download libtool">
+ <run id="41" name="Download libtool">
<command>mkdir libtool; cd libtool; wget </command>
<arguments>http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz</arguments>
<timeout>0</timeout>
@@ -171,7 +171,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Unpack libtool">
+ <run id="42" name="Unpack libtool">
<command>cd libtool; tar xfvz </command>
<arguments>libtool-2.4.2.tar.gz</arguments>
<timeout>0</timeout>
@@ -179,7 +179,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Configure libtool">
+ <run id="43" name="Configure libtool">
<command>cd libtool/libtool-2.4.2; ./configure </command>
<arguments>--prefix=/usr/local </arguments>
<timeout>0</timeout>
@@ -187,7 +187,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Install libtool">
+ <run id="44" name="Install libtool">
<command>cd libtool/libtool-2.4.2; sudo make install</command>
<arguments> </arguments>
<timeout>0</timeout>
@@ -198,7 +198,7 @@
</sequence>
<sequence enabled="true">
<!-- Install glpk -->
- <run id="1" name="Download glpk">
+ <run id="51" name="Download glpk">
<command>mkdir glpk; cd glpk; wget </command>
<arguments>http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz</arguments>
<timeout>0</timeout>
@@ -206,7 +206,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Unpack glpk">
+ <run id="52" name="Unpack glpk">
<command>cd glpk; tar -xzvf</command>
<arguments>glpk-4.47.tar.gz</arguments>
<timeout>0</timeout>
@@ -214,7 +214,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Configure glpk">
+ <run id="53" name="Configure glpk">
<command>cd glpk/glpk-4.47; ./configure </command>
<arguments> --with-gnutls</arguments>
<timeout>0</timeout>
@@ -222,7 +222,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Install glpk">
+ <run id="54" name="Install glpk">
<command>cd glpk/glpk-4.47; sudo make install</command>
<arguments> </arguments>
<timeout>0</timeout>
@@ -233,7 +233,7 @@
</sequence>
<sequence enabled="true">
<!-- Install libgpg-error -->
- <run id="1" name="Download libgpg-error">
+ <run id="61" name="Download libgpg-error">
<command>mkdir libgpg-error; cd libgpg-error; wget </command>
<arguments>ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.10.tar.bz2</arguments>
<timeout>0</timeout>
@@ -241,7 +241,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Unpack libgpg-error">
+ <run id="62" name="Unpack libgpg-error">
<command>cd libgpg-error; tar -xjvf</command>
<arguments>libgpg-error-1.10.tar.bz2</arguments>
<timeout>0</timeout>
@@ -249,7 +249,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Configure libgpg-error">
+ <run id="63" name="Configure libgpg-error">
<command>cd libgpg-error/libgpg-error-1.10; ./configure </command>
<arguments></arguments>
<timeout>0</timeout>
@@ -257,7 +257,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Install libgpg-error">
+ <run id="64" name="Install libgpg-error">
<command>cd libgpg-error/libgpg-error-1.10; sudo make
install</command>
<arguments> </arguments>
<timeout>0</timeout>
@@ -268,7 +268,7 @@
</sequence>
<sequence enabled="true">
<!-- Install libgcrypt -->
- <run id="1" name="Download libgcrypt">
+ <run id="71" name="Download libgcrypt">
<command>mkdir libgcrypt; cd libgcrypt; wget </command>
<arguments>ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.5.0.tar.bz2</arguments>
<timeout>0</timeout>
@@ -276,7 +276,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Unpack libgcrypt">
+ <run id="72" name="Unpack libgcrypt">
<command>cd libgcrypt; tar -xjvf</command>
<arguments>libgcrypt-1.5.0.tar.bz2</arguments>
<timeout>0</timeout>
@@ -284,7 +284,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Configure libgcrypt">
+ <run id="73" name="Configure libgcrypt">
<command>cd libgcrypt/libgcrypt-1.5.0; ./configure </command>
<arguments></arguments>
<timeout>0</timeout>
@@ -292,7 +292,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Install libgcrypt">
+ <run id="74" name="Install libgcrypt">
<command>cd libgcrypt/libgcrypt-1.5.0; sudo make install</command>
<arguments> </arguments>
<timeout>0</timeout>
@@ -303,7 +303,7 @@
</sequence>
<sequence enabled="true">
<!-- Install libcurl -->
- <run id="1" name="Download libcurl">
+ <run id="81" name="Download libcurl">
<command>mkdir libcurl; cd libcurl; wget </command>
<arguments>http://curl.haxx.se/download/curl-7.26.0.tar.gz</arguments>
<timeout>0</timeout>
@@ -311,7 +311,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Unpack libcurl">
+ <run id="82" name="Unpack libcurl">
<command>cd libcurl; tar -xzvf</command>
<arguments>curl-7.26.0.tar.gz</arguments>
<timeout>0</timeout>
@@ -319,7 +319,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Configure libcurl">
+ <run id="83" name="Configure libcurl">
<command>cd libcurl/curl-7.26.0; ./configure </command>
<arguments></arguments>
<timeout>0</timeout>
@@ -327,7 +327,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Install libcurl">
+ <run id="84" name="Install libcurl">
<command>cd libcurl/curl-7.26.0; sudo make install</command>
<arguments> </arguments>
<timeout>0</timeout>
@@ -338,7 +338,7 @@
</sequence>
<sequence enabled="true">
<!-- Install libunistring -->
- <run id="1" name="Download libunistring">
+ <run id="85" name="Download libunistring">
<command>mkdir libunistring; cd libunistring; wget </command>
<arguments>http://ftp.gnu.org/gnu/libunistring/libunistring-0.9.3.tar.gz</arguments>
<timeout>0</timeout>
@@ -346,7 +346,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Unpack libunistring">
+ <run id="86" name="Unpack libunistring">
<command>cd libunistring; tar -xzvf</command>
<arguments>libunistring-0.9.3.tar.gz</arguments>
<timeout>0</timeout>
@@ -354,7 +354,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Configure libunistring">
+ <run id="87" name="Configure libunistring">
<command>cd libunistring/libunistring-0.9.3; ./configure
</command>
<arguments></arguments>
<timeout>0</timeout>
@@ -362,7 +362,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Install libunistring">
+ <run id="88" name="Install libunistring">
<command>cd libunistring/libunistring-0.9.3; sudo make
install</command>
<arguments> </arguments>
<timeout>0</timeout>
@@ -373,7 +373,7 @@
</sequence>
<sequence>
- <run id="1" name="Remove conflicting packages : libgcrypt">
+ <run id="91" name="Remove conflicting packages : libgcrypt">
<command>sudo rpm -e --nodeps</command>
<arguments>libgcrypt</arguments>
<timeout>0</timeout>
@@ -385,7 +385,7 @@
<sequence enabled="true">
<!-- Install libextractor -->
- <run id="1" name="Download libextractor">
+ <run id="101" name="Download libextractor">
<command>mkdir libextractor; cd libextractor; wget </command>
<arguments>ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz</arguments>
<timeout>0</timeout>
@@ -393,7 +393,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Unpack libextractor">
+ <run id="102" name="Unpack libextractor">
<command>cd libextractor; tar -xzvf</command>
<arguments>libextractor-0.6.3.tar.gz</arguments>
<timeout>0</timeout>
@@ -401,7 +401,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Configure libextractor">
+ <run id="103" name="Configure libextractor">
<command>cd libextractor/libextractor-0.6.3; ./configure
</command>
<arguments>--prefix=/usr/local </arguments>
<timeout>0</timeout>
@@ -409,7 +409,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Install libextractor">
+ <run id="104" name="Install libextractor">
<command>cd libextractor/libextractor-0.6.3; sudo make
install</command>
<arguments> </arguments>
<timeout>0</timeout>
@@ -421,7 +421,7 @@
<sequence enabled="true">
<!-- Install libmicrohttpd and dependencies -->
- <run id="1" name="Install dependencies with yum : gmp-devel">
+ <run id="111" name="Install dependencies with yum : gmp-devel">
<!-- Install gmp and gmp devel for libnettle and gnutls
-->
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>gmp-devel</arguments>
@@ -432,7 +432,7 @@
</run>
<sequence enabled="true">
<!-- Install libnettle required for GnuTLS-->
- <run id="1" name="Download libnettle">
+ <run id="112" name="Download libnettle">
<command>mkdir libnettle; cd libnettle; wget </command>
<arguments>http://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz</arguments>
<timeout>0</timeout>
@@ -440,7 +440,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Unpack libnettle">
+ <run id="113" name="Unpack libnettle">
<command>cd libnettle; tar -xzvf</command>
<arguments>nettle-2.5.tar.gz</arguments>
<timeout>0</timeout>
@@ -448,7 +448,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Configure libnettle">
+ <run id="114" name="Configure libnettle">
<command>cd libnettle/nettle-2.5; ./configure </command>
<arguments></arguments>
<timeout>0</timeout>
@@ -456,7 +456,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Build libnettle">
+ <run id="115" name="Build libnettle">
<command>cd libnettle/nettle-2.5; make all</command>
<arguments> </arguments>
<timeout>0</timeout>
@@ -464,7 +464,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Install libnettle">
+ <run id="116" name="Install libnettle">
<command>cd libnettle/nettle-2.5; sudo make install</command>
<arguments> </arguments>
<timeout>0</timeout>
@@ -474,7 +474,7 @@
</run>
</sequence>
<!-- Install GnuTLS for MHD -->
- <run id="1" name="Download GnuTLS">
+ <run id="117" name="Download GnuTLS">
<command>mkdir gnutls; cd gnutls; wget </command>
<arguments>http://ftp.gnu.org/gnu/gnutls/gnutls-2.12.20.tar.bz2</arguments>
<timeout>0</timeout>
@@ -482,7 +482,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Unpack gnutls">
+ <run id="118" name="Unpack gnutls">
<command>cd gnutls; tar -xvjf</command>
<arguments>gnutls-2.12.20.tar.bz2</arguments>
<timeout>0</timeout>
@@ -490,7 +490,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Configure gnutls">
+ <run id="119" name="Configure gnutls">
<command>cd gnutls/gnutls-2.12.20; ./configure</command>
<arguments>--without-p11-kit</arguments>
<timeout>0</timeout>
@@ -498,7 +498,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Install gnutls">
+ <run id="120" name="Install gnutls">
<command>cd gnutls/gnutls-2.12.20; sudo make install</command>
<arguments> </arguments>
<timeout>0</timeout>
@@ -509,7 +509,7 @@
</sequence>
<sequence >
<!-- Install libmicrohttpd -->
- <run id="1" name="Download ">
+ <run id="121" name="Download ">
<command>mkdir libmicrohttpd; cd libmicrohttpd; wget </command>
<arguments>ftp://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.21.tar.gz</arguments>
<timeout>0</timeout>
@@ -517,7 +517,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Unpack libmicrohttpd">
+ <run id="122" name="Unpack libmicrohttpd">
<command>cd libmicrohttpd; tar -xzvf</command>
<arguments>libmicrohttpd-0.9.21.tar.gz</arguments>
<timeout>0</timeout>
@@ -525,7 +525,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Configure libmicrohttpd">
+ <run id="123" name="Configure libmicrohttpd">
<command>cd libmicrohttpd/libmicrohttpd-0.9.21; ./configure
</command>
<arguments>--prefix=/usr/local </arguments>
<timeout>0</timeout>
@@ -533,7 +533,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Install libmicrohttpd">
+ <run id="124" name="Install libmicrohttpd">
<command>cd libmicrohttpd/libmicrohttpd-0.9.21; sudo make
install</command>
<arguments> </arguments>
<timeout>0</timeout>
@@ -546,7 +546,7 @@
<sequence>
<!-- Install GNUnet from svn -->
- <run id="1" name="Download GNUnet">
+ <run id="131" name="Download GNUnet">
<command>svn checkout</command>
<arguments> https://gnunet.org/svn/gnunet</arguments>
<timeout>0</timeout>
@@ -554,7 +554,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Bootstrap GNUnet" enabled="true">
+ <run id="132" name="Bootstrap GNUnet" enabled="true">
<command>cd gnunet; libtoolize; ./bootstrap</command>
<arguments></arguments>
<timeout>0</timeout>
@@ -562,7 +562,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Configure GNUnet" enabled="true">
+ <run id="133" name="Configure GNUnet" enabled="true">
<command>cd gnunet; export LD_LIBRARY_PATH=/usr/local/lib;
./configure </command>
<arguments>--prefix=$HOME/gnbuild --with-extractor=/usr
--with-libgcrypt-prefix=/usr/local --with-curl=/usr/local
--with-mysql=/usr/lib/mysql --enable-logging=verbose</arguments>
<timeout>0</timeout>
@@ -570,7 +570,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Install GNUnet">
+ <run id="134" name="Install GNUnet">
<command>cd gnunet; export LD_LIBRARY_PATH=/usr/local/lib; make
install</command>
<arguments> </arguments>
<timeout>0</timeout>
@@ -580,7 +580,7 @@
</run>
<sequence enabled="true">
<!-- Postinstallation setup -->
- <run id="1" name="Create GNUnet directory" enabled="true">
+ <run id="141" name="Create GNUnet directory" enabled="true">
<command>mkdir .gnunet; touch .gnunet/gnunet.conf</command>
<arguments></arguments>
<timeout>0</timeout>
@@ -588,7 +588,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Set GNUNET_PREFIX" enabled="true">
+ <run id="142" name="Set GNUNET_PREFIX" enabled="true">
<command>echo -e "export GNUNET_PREFIX=$HOME/gnbuild \n" >>
~/.bashrc</command>
<arguments></arguments>
<timeout>0</timeout>
@@ -596,7 +596,7 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- <run id="1" name="Configure GNUnet" enabled="true">
+ <run id="143" name="Configure GNUnet" enabled="true">
<command>echo -e "export PATH=$PATH:$GNUNET_PREFIX/bin \n" >>
~/.bashrc</command>
<arguments></arguments>
<timeout>0</timeout>
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r22975 - gnunet-planetlab/gplmt/contrib,
gnunet <=