[GNUnet-SVN] [gnurl] 57/173: docs: Add note about libcurl copying strings to CURLOPT_* manpages

[gnunet]

This is an automated email from the git hooks/post-receive script.

ng0 pushed a commit to annotated tag gnurl-7.53.1
in repository gnurl.

commit dbd37938599e705bf57e2965cc007e83a6ff7d9b
Author: Frank Gevaerts <address@hidden>
AuthorDate: Wed Dec 21 14:48:35 2016 +0100

    docs: Add note about libcurl copying strings to CURLOPT_* manpages
    
    Closes #1169
---
 docs/libcurl/opts/CURLOPT_ACCEPT_ENCODING.3         | 3 +++
 docs/libcurl/opts/CURLOPT_CAINFO.3                  | 3 +++
 docs/libcurl/opts/CURLOPT_CAPATH.3                  | 3 +++
 docs/libcurl/opts/CURLOPT_COOKIE.3                  | 3 +++
 docs/libcurl/opts/CURLOPT_COOKIEFILE.3              | 3 +++
 docs/libcurl/opts/CURLOPT_COOKIEJAR.3               | 3 +++
 docs/libcurl/opts/CURLOPT_CRLFILE.3                 | 3 +++
 docs/libcurl/opts/CURLOPT_CUSTOMREQUEST.3           | 3 +++
 docs/libcurl/opts/CURLOPT_DEFAULT_PROTOCOL.3        | 3 +++
 docs/libcurl/opts/CURLOPT_DNS_INTERFACE.3           | 3 +++
 docs/libcurl/opts/CURLOPT_DNS_LOCAL_IP4.3           | 3 +++
 docs/libcurl/opts/CURLOPT_DNS_LOCAL_IP6.3           | 3 +++
 docs/libcurl/opts/CURLOPT_DNS_SERVERS.3             | 3 +++
 docs/libcurl/opts/CURLOPT_EGDSOCKET.3               | 3 +++
 docs/libcurl/opts/CURLOPT_FTPPORT.3                 | 3 +++
 docs/libcurl/opts/CURLOPT_FTP_ACCOUNT.3             | 3 +++
 docs/libcurl/opts/CURLOPT_FTP_ALTERNATIVE_TO_USER.3 | 3 +++
 docs/libcurl/opts/CURLOPT_INTERFACE.3               | 3 +++
 docs/libcurl/opts/CURLOPT_ISSUERCERT.3              | 3 +++
 docs/libcurl/opts/CURLOPT_KEYPASSWD.3               | 3 +++
 docs/libcurl/opts/CURLOPT_KRBLEVEL.3                | 3 +++
 docs/libcurl/opts/CURLOPT_LOGIN_OPTIONS.3           | 3 +++
 docs/libcurl/opts/CURLOPT_MAIL_AUTH.3               | 3 +++
 docs/libcurl/opts/CURLOPT_MAIL_FROM.3               | 3 +++
 docs/libcurl/opts/CURLOPT_NETRC_FILE.3              | 3 +++
 docs/libcurl/opts/CURLOPT_NOPROXY.3                 | 3 +++
 docs/libcurl/opts/CURLOPT_PASSWORD.3                | 3 +++
 docs/libcurl/opts/CURLOPT_PINNEDPUBLICKEY.3         | 3 +++
 docs/libcurl/opts/CURLOPT_PRE_PROXY.3               | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY.3                   | 3 +++
 docs/libcurl/opts/CURLOPT_PROXYPASSWORD.3           | 3 +++
 docs/libcurl/opts/CURLOPT_PROXYUSERNAME.3           | 3 +++
 docs/libcurl/opts/CURLOPT_PROXYUSERPWD.3            | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_CAINFO.3            | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_CAPATH.3            | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_CRLFILE.3           | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_KEYPASSWD.3         | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_PINNEDPUBLICKEY.3   | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_SERVICE_NAME.3      | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_SSLCERT.3           | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_SSLCERTTYPE.3       | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_SSLKEY.3            | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_SSLKEYTYPE.3        | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_SSL_CIPHER_LIST.3   | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_PASSWORD.3  | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_TYPE.3      | 3 +++
 docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_USERNAME.3  | 3 +++
 docs/libcurl/opts/CURLOPT_RANDOM_FILE.3             | 3 +++
 docs/libcurl/opts/CURLOPT_RANGE.3                   | 3 +++
 docs/libcurl/opts/CURLOPT_REFERER.3                 | 3 +++
 docs/libcurl/opts/CURLOPT_RTSP_SESSION_ID.3         | 3 +++
 docs/libcurl/opts/CURLOPT_RTSP_STREAM_URI.3         | 3 +++
 docs/libcurl/opts/CURLOPT_RTSP_TRANSPORT.3          | 3 +++
 docs/libcurl/opts/CURLOPT_SERVICE_NAME.3            | 3 +++
 docs/libcurl/opts/CURLOPT_SOCKS5_GSSAPI_SERVICE.3   | 3 +++
 docs/libcurl/opts/CURLOPT_SSH_HOST_PUBLIC_KEY_MD5.3 | 3 +++
 docs/libcurl/opts/CURLOPT_SSH_KNOWNHOSTS.3          | 3 +++
 docs/libcurl/opts/CURLOPT_SSH_PRIVATE_KEYFILE.3     | 3 +++
 docs/libcurl/opts/CURLOPT_SSH_PUBLIC_KEYFILE.3      | 3 +++
 docs/libcurl/opts/CURLOPT_SSLCERT.3                 | 3 +++
 docs/libcurl/opts/CURLOPT_SSLCERTTYPE.3             | 3 +++
 docs/libcurl/opts/CURLOPT_SSLENGINE.3               | 3 +++
 docs/libcurl/opts/CURLOPT_SSLKEY.3                  | 3 +++
 docs/libcurl/opts/CURLOPT_SSLKEYTYPE.3              | 3 +++
 docs/libcurl/opts/CURLOPT_SSL_CIPHER_LIST.3         | 3 +++
 docs/libcurl/opts/CURLOPT_TLSAUTH_PASSWORD.3        | 3 +++
 docs/libcurl/opts/CURLOPT_TLSAUTH_TYPE.3            | 3 +++
 docs/libcurl/opts/CURLOPT_TLSAUTH_USERNAME.3        | 3 +++
 docs/libcurl/opts/CURLOPT_UNIX_SOCKET_PATH.3        | 3 +++
 docs/libcurl/opts/CURLOPT_URL.3                     | 3 +++
 docs/libcurl/opts/CURLOPT_USERAGENT.3               | 3 +++
 docs/libcurl/opts/CURLOPT_USERNAME.3                | 3 +++
 docs/libcurl/opts/CURLOPT_USERPWD.3                 | 3 +++
 docs/libcurl/opts/CURLOPT_XOAUTH2_BEARER.3          | 3 +++
 74 files changed, 222 insertions(+)

diff --git a/docs/libcurl/opts/CURLOPT_ACCEPT_ENCODING.3 
b/docs/libcurl/opts/CURLOPT_ACCEPT_ENCODING.3
index c31263139..3a5fc166d 100644
--- a/docs/libcurl/opts/CURLOPT_ACCEPT_ENCODING.3
+++ b/docs/libcurl/opts/CURLOPT_ACCEPT_ENCODING.3
@@ -58,6 +58,9 @@ The Content-Length: servers send for a compressed response is 
supposed to
 indicate the length of the compressed content so when auto decoding is enabled
 it may not match the sum of bytes reported by the write callbacks (although,
 sending the length of the non-compressed content is a common server mistake).
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_CAINFO.3 
b/docs/libcurl/opts/CURLOPT_CAINFO.3
index 7db50a8fa..127b90443 100644
--- a/docs/libcurl/opts/CURLOPT_CAINFO.3
+++ b/docs/libcurl/opts/CURLOPT_CAINFO.3
@@ -46,6 +46,9 @@ option is supported for backward compatibility with other SSL 
engines, but it
 should not be set. If the option is not set, then curl will use the
 certificates in the system and user Keychain to verify the peer, which is the
 preferred method of verifying the peer's certificate chain.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 Built-in system specific
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_CAPATH.3 
b/docs/libcurl/opts/CURLOPT_CAPATH.3
index 0369f8910..85ef06956 100644
--- a/docs/libcurl/opts/CURLOPT_CAPATH.3
+++ b/docs/libcurl/opts/CURLOPT_CAPATH.3
@@ -36,6 +36,9 @@ This makes sense only when used in combination with the
 
 The \fICURLOPT_CAPATH(3)\fP function apparently does not work in Windows due
 to some limitation in openssl.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_COOKIE.3 
b/docs/libcurl/opts/CURLOPT_COOKIE.3
index 32c2fc293..d0da3f1f1 100644
--- a/docs/libcurl/opts/CURLOPT_COOKIE.3
+++ b/docs/libcurl/opts/CURLOPT_COOKIE.3
@@ -55,6 +55,9 @@ previous ones.
 This option will not enable the cookie engine. Use \fICURLOPT_COOKIEFILE(3)\fP
 or \fICURLOPT_COOKIEJAR(3)\fP to enable parsing and sending cookies
 automatically.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL, no cookies
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_COOKIEFILE.3 
b/docs/libcurl/opts/CURLOPT_COOKIEFILE.3
index 00816b15d..ba2d1e350 100644
--- a/docs/libcurl/opts/CURLOPT_COOKIEFILE.3
+++ b/docs/libcurl/opts/CURLOPT_COOKIEFILE.3
@@ -53,6 +53,9 @@ sub-domains) or use the Netscape format.
 
 If you use this option multiple times, you just add more files to read.
 Subsequent files will add more cookies.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_COOKIEJAR.3 
b/docs/libcurl/opts/CURLOPT_COOKIEJAR.3
index 79a372305..3c1f54103 100644
--- a/docs/libcurl/opts/CURLOPT_COOKIEJAR.3
+++ b/docs/libcurl/opts/CURLOPT_COOKIEJAR.3
@@ -46,6 +46,9 @@ only visible feedback you get about this possibly lethal 
situation.
 
 Since 7.43.0 cookies that were imported in the Set-Cookie format without a
 domain name are not exported by this option.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_CRLFILE.3 
b/docs/libcurl/opts/CURLOPT_CRLFILE.3
index 6bb035e7e..4ab7a64a5 100644
--- a/docs/libcurl/opts/CURLOPT_CRLFILE.3
+++ b/docs/libcurl/opts/CURLOPT_CRLFILE.3
@@ -45,6 +45,9 @@ A specific error code (\fICURLE_SSL_CRL_BADFILE\fP) is 
defined with the
 option. It is returned when the SSL exchange fails because the CRL file cannot
 be loaded.  A failure in certificate verification due to a revocation
 information found in the CRL does not trigger this specific error.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_CUSTOMREQUEST.3 
b/docs/libcurl/opts/CURLOPT_CUSTOMREQUEST.3
index 553d40857..2bd351799 100644
--- a/docs/libcurl/opts/CURLOPT_CUSTOMREQUEST.3
+++ b/docs/libcurl/opts/CURLOPT_CUSTOMREQUEST.3
@@ -80,6 +80,9 @@ Normally a multiline response is returned which can be used, 
in conjunction
 with \fICURLOPT_MAIL_RCPT(3)\fP, to specify an EXPN request. If the
 \fICURLOPT_NOBODY(3)\fP option is specified then the request can be used to
 issue NOOP and RSET commands.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_DEFAULT_PROTOCOL.3 
b/docs/libcurl/opts/CURLOPT_DEFAULT_PROTOCOL.3
index f7f890cad..a39c6b3f4 100644
--- a/docs/libcurl/opts/CURLOPT_DEFAULT_PROTOCOL.3
+++ b/docs/libcurl/opts/CURLOPT_DEFAULT_PROTOCOL.3
@@ -49,6 +49,9 @@ This option does not change the default proxy protocol (http).
 
 Without this option libcurl would make a guess based on the host, see
 \fICURLOPT_URL(3)\fP for details.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL (make a guess based on the host)
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_DNS_INTERFACE.3 
b/docs/libcurl/opts/CURLOPT_DNS_INTERFACE.3
index f76439807..8df700a45 100644
--- a/docs/libcurl/opts/CURLOPT_DNS_INTERFACE.3
+++ b/docs/libcurl/opts/CURLOPT_DNS_INTERFACE.3
@@ -32,6 +32,9 @@ Pass a char * as parameter. Set the name of the network 
interface that the DNS
 resolver should bind to. This must be an interface name (not an address). Set
 this option to NULL to use the default setting (don't bind to a specific
 interface).
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_DNS_LOCAL_IP4.3 
b/docs/libcurl/opts/CURLOPT_DNS_LOCAL_IP4.3
index ef9f1e267..1c4470ef9 100644
--- a/docs/libcurl/opts/CURLOPT_DNS_LOCAL_IP4.3
+++ b/docs/libcurl/opts/CURLOPT_DNS_LOCAL_IP4.3
@@ -32,6 +32,9 @@ Set the local IPv4 \fIaddress\fP that the resolver should 
bind to. The
 argument should be of type char * and contain a single numerical IPv4 address
 as a string.  Set this option to NULL to use the default setting (don't bind
 to a specific IP address).
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_DNS_LOCAL_IP6.3 
b/docs/libcurl/opts/CURLOPT_DNS_LOCAL_IP6.3
index 7d82bdf85..3c783479a 100644
--- a/docs/libcurl/opts/CURLOPT_DNS_LOCAL_IP6.3
+++ b/docs/libcurl/opts/CURLOPT_DNS_LOCAL_IP6.3
@@ -32,6 +32,9 @@ Set the local IPv6 \fIaddress\fP that the resolver should 
bind to. The
 argument should be of type char * and contain a single IPv6 address as a
 string.  Set this option to NULL to use the default setting (don't bind to a
 specific IP address).
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_DNS_SERVERS.3 
b/docs/libcurl/opts/CURLOPT_DNS_SERVERS.3
index 14c9f9bd4..522eabcc5 100644
--- a/docs/libcurl/opts/CURLOPT_DNS_SERVERS.3
+++ b/docs/libcurl/opts/CURLOPT_DNS_SERVERS.3
@@ -36,6 +36,9 @@ host[:port][,host[:port]]...
 For example:
 
 192.168.1.100,192.168.1.101,3.4.5.6
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL - use system default
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_EGDSOCKET.3 
b/docs/libcurl/opts/CURLOPT_EGDSOCKET.3
index ad91c3f01..117ed3bc8 100644
--- a/docs/libcurl/opts/CURLOPT_EGDSOCKET.3
+++ b/docs/libcurl/opts/CURLOPT_EGDSOCKET.3
@@ -30,6 +30,9 @@ CURLcode curl_easy_setopt(CURL *handle, CURLOPT_EGDSOCKET, 
char *path);
 .SH DESCRIPTION
 Pass a char * to the zero terminated path name to the Entropy Gathering Daemon
 socket. It will be used to seed the random engine for SSL.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_FTPPORT.3 
b/docs/libcurl/opts/CURLOPT_FTPPORT.3
index 8e300bc21..0f2a9f7f9 100644
--- a/docs/libcurl/opts/CURLOPT_FTPPORT.3
+++ b/docs/libcurl/opts/CURLOPT_FTPPORT.3
@@ -57,6 +57,9 @@ Examples with specified ports:
 
 You disable PORT again and go back to using the passive version by setting
 this option to NULL.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_FTP_ACCOUNT.3 
b/docs/libcurl/opts/CURLOPT_FTP_ACCOUNT.3
index 0d768d773..5422a6bfe 100644
--- a/docs/libcurl/opts/CURLOPT_FTP_ACCOUNT.3
+++ b/docs/libcurl/opts/CURLOPT_FTP_ACCOUNT.3
@@ -31,6 +31,9 @@ CURLcode curl_easy_setopt(CURL *handle, CURLOPT_FTP_ACCOUNT, 
char *account);
 Pass a pointer to a zero terminated string (or NULL to disable). When an FTP
 server asks for "account data" after user name and password has been provided,
 this data is sent off using the ACCT command.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_FTP_ALTERNATIVE_TO_USER.3 
b/docs/libcurl/opts/CURLOPT_FTP_ALTERNATIVE_TO_USER.3
index 575810906..cd444b6ae 100644
--- a/docs/libcurl/opts/CURLOPT_FTP_ALTERNATIVE_TO_USER.3
+++ b/docs/libcurl/opts/CURLOPT_FTP_ALTERNATIVE_TO_USER.3
@@ -35,6 +35,9 @@ authenticate if the usual FTP "USER user" and "PASS password" 
negotiation
 fails. This is currently only known to be required when connecting to
 Tumbleweed's Secure Transport FTPS server using client certificates for
 authentication.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_INTERFACE.3 
b/docs/libcurl/opts/CURLOPT_INTERFACE.3
index 77db3723e..8b7aff0c5 100644
--- a/docs/libcurl/opts/CURLOPT_INTERFACE.3
+++ b/docs/libcurl/opts/CURLOPT_INTERFACE.3
@@ -40,6 +40,9 @@ synchronously.  Using the if! format is highly recommended 
when using the
 multi interfaces to avoid allowing the code to block.  If "if!" is specified
 but the parameter does not match an existing interface, CURLE_INTERFACE_FAILED
 is returned from the libcurl function used to perform the transfer.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL, use whatever the TCP stack finds suitable
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_ISSUERCERT.3 
b/docs/libcurl/opts/CURLOPT_ISSUERCERT.3
index 61198eac2..8919039bc 100644
--- a/docs/libcurl/opts/CURLOPT_ISSUERCERT.3
+++ b/docs/libcurl/opts/CURLOPT_ISSUERCERT.3
@@ -43,6 +43,9 @@ A specific error code (CURLE_SSL_ISSUER_ERROR) is defined 
with the option,
 which is returned if the setup of the SSL/TLS session has failed due to a
 mismatch with the issuer of peer certificate (\fICURLOPT_SSL_VERIFYPEER(3)\fP
 has to be set too for the check to fail). (Added in 7.19.0)
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_KEYPASSWD.3 
b/docs/libcurl/opts/CURLOPT_KEYPASSWD.3
index 9b85b824d..45f6aca3f 100644
--- a/docs/libcurl/opts/CURLOPT_KEYPASSWD.3
+++ b/docs/libcurl/opts/CURLOPT_KEYPASSWD.3
@@ -32,6 +32,9 @@ Pass a pointer to a zero terminated string as parameter. It 
will be used as
 the password required to use the \fICURLOPT_SSLKEY(3)\fP or
 \fICURLOPT_SSH_PRIVATE_KEYFILE(3)\fP private key.  You never needed a pass
 phrase to load a certificate but you need one to load your private key.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_KRBLEVEL.3 
b/docs/libcurl/opts/CURLOPT_KRBLEVEL.3
index 6ebd2f272..f23d72c2b 100644
--- a/docs/libcurl/opts/CURLOPT_KRBLEVEL.3
+++ b/docs/libcurl/opts/CURLOPT_KRBLEVEL.3
@@ -33,6 +33,9 @@ enables kerberos awareness.  This is a string that should 
match one of the
 following: \&'clear', \&'safe', \&'confidential' or \&'private'.  If the
 string is set but doesn't match one of these, 'private' will be used. Set the
 string to NULL to disable kerberos support for FTP.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_LOGIN_OPTIONS.3 
b/docs/libcurl/opts/CURLOPT_LOGIN_OPTIONS.3
index a9ca19287..5688bb99a 100644
--- a/docs/libcurl/opts/CURLOPT_LOGIN_OPTIONS.3
+++ b/docs/libcurl/opts/CURLOPT_LOGIN_OPTIONS.3
@@ -38,6 +38,9 @@ IETF draft draft-earhart-url-smtp-00.txt
 options, such as the preferred authentication mechanism via "AUTH=NTLM" or
 "AUTH=*", and should be used in conjunction with the \fICURLOPT_USERNAME(3)\fP
 option.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_MAIL_AUTH.3 
b/docs/libcurl/opts/CURLOPT_MAIL_AUTH.3
index bd581f0d2..ef917791d 100644
--- a/docs/libcurl/opts/CURLOPT_MAIL_AUTH.3
+++ b/docs/libcurl/opts/CURLOPT_MAIL_AUTH.3
@@ -43,6 +43,9 @@ Unlike \fICURLOPT_MAIL_FROM(3)\fP and 
\fICURLOPT_MAIL_RCPT(3)\fP, the address
 should not be specified within a pair of angled brackets (<>). However, if an
 empty string is used then a pair of brackets will be sent by libcurl as
 required by RFC2554.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_MAIL_FROM.3 
b/docs/libcurl/opts/CURLOPT_MAIL_FROM.3
index 0420d4936..4283f90db 100644
--- a/docs/libcurl/opts/CURLOPT_MAIL_FROM.3
+++ b/docs/libcurl/opts/CURLOPT_MAIL_FROM.3
@@ -36,6 +36,9 @@ around it, which if not specified will be added automatically.
 
 If this parameter is not specified then an empty address will be sent to the
 mail server which may cause the email to be rejected.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 blank
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_NETRC_FILE.3 
b/docs/libcurl/opts/CURLOPT_NETRC_FILE.3
index d3ecc9574..b7132569a 100644
--- a/docs/libcurl/opts/CURLOPT_NETRC_FILE.3
+++ b/docs/libcurl/opts/CURLOPT_NETRC_FILE.3
@@ -33,6 +33,9 @@ the full path name to the \fIfile\fP you want libcurl to use 
as .netrc
 file. If this option is omitted, and \fICURLOPT_NETRC(3)\fP is set, libcurl
 will attempt to find a .netrc file in the current user's home
 directory.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_NOPROXY.3 
b/docs/libcurl/opts/CURLOPT_NOPROXY.3
index 2998a30a8..1048b55a3 100644
--- a/docs/libcurl/opts/CURLOPT_NOPROXY.3
+++ b/docs/libcurl/opts/CURLOPT_NOPROXY.3
@@ -36,6 +36,9 @@ list is matched as either a domain which contains the 
hostname, or the
 hostname itself. For example, example.com would match example.com,
 example.com:80, and www.example.com, but not www.notanexample.com or
 example.com.othertld.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PASSWORD.3 
b/docs/libcurl/opts/CURLOPT_PASSWORD.3
index 06ed9e19e..e9f6d06bc 100644
--- a/docs/libcurl/opts/CURLOPT_PASSWORD.3
+++ b/docs/libcurl/opts/CURLOPT_PASSWORD.3
@@ -33,6 +33,9 @@ password to use for the transfer.
 
 The \fICURLOPT_PASSWORD(3)\fP option should be used in conjunction with the
 \fICURLOPT_USERNAME(3)\fP option.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 blank
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PINNEDPUBLICKEY.3 
b/docs/libcurl/opts/CURLOPT_PINNEDPUBLICKEY.3
index 33d201d90..1951c88a6 100644
--- a/docs/libcurl/opts/CURLOPT_PINNEDPUBLICKEY.3
+++ b/docs/libcurl/opts/CURLOPT_PINNEDPUBLICKEY.3
@@ -39,6 +39,9 @@ if it does not exactly match the public key provided to this 
option, curl will
 abort the connection before sending or receiving any data.
 
 On mismatch, \fICURLE_SSL_PINNEDPUBKEYNOTMATCH\fP is returned.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PRE_PROXY.3 
b/docs/libcurl/opts/CURLOPT_PRE_PROXY.3
index 035dd3ac6..c5f6dcf7f 100644
--- a/docs/libcurl/opts/CURLOPT_PRE_PROXY.3
+++ b/docs/libcurl/opts/CURLOPT_PRE_PROXY.3
@@ -50,6 +50,9 @@ be used. Otherwise SOCKS4 is used as default.
 
 Setting the pre proxy string to "" (an empty string) will explicitly disable
 the use of a pre proxy.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 Default is NULL, meaning no pre proxy is used.
 
diff --git a/docs/libcurl/opts/CURLOPT_PROXY.3 
b/docs/libcurl/opts/CURLOPT_PROXY.3
index 64b74faed..9a8656114 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY.3
@@ -62,6 +62,9 @@ use of a proxy, even if there is an environment variable set 
for it.
 
 A proxy host string can also include protocol scheme (http://) and embedded
 user + password.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 Default is NULL, meaning no proxy is used.
 
diff --git a/docs/libcurl/opts/CURLOPT_PROXYPASSWORD.3 
b/docs/libcurl/opts/CURLOPT_PROXYPASSWORD.3
index 18272c34c..c7fbb179e 100644
--- a/docs/libcurl/opts/CURLOPT_PROXYPASSWORD.3
+++ b/docs/libcurl/opts/CURLOPT_PROXYPASSWORD.3
@@ -33,6 +33,9 @@ password to use for authentication with the proxy.
 
 The \fICURLOPT_PROXYPASSWORD(3)\fP option should be used in conjunction with
 the \fICURLOPT_PROXYUSERNAME(3)\fP option.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 blank
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXYUSERNAME.3 
b/docs/libcurl/opts/CURLOPT_PROXYUSERNAME.3
index 0d7a241fb..46ecac6bf 100644
--- a/docs/libcurl/opts/CURLOPT_PROXYUSERNAME.3
+++ b/docs/libcurl/opts/CURLOPT_PROXYUSERNAME.3
@@ -37,6 +37,9 @@ user name to use for the transfer.
 authentication with the proxy.
 
 To specify the proxy password use the \fICURLOPT_PROXYPASSWORD(3)\fP.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 blank
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXYUSERPWD.3 
b/docs/libcurl/opts/CURLOPT_PROXYUSERPWD.3
index 1b47b892f..ebfcfcc99 100644
--- a/docs/libcurl/opts/CURLOPT_PROXYUSERPWD.3
+++ b/docs/libcurl/opts/CURLOPT_PROXYUSERPWD.3
@@ -35,6 +35,9 @@ should encode it as %3A. (This is different to how 
\fICURLOPT_USERPWD(3)\fP is
 used - beware.)
 
 Use \fICURLOPT_PROXYAUTH(3)\fP to specify the authentication method.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 This is NULL by default.
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_CAINFO.3 
b/docs/libcurl/opts/CURLOPT_PROXY_CAINFO.3
index dfc025f00..43bc32b5b 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_CAINFO.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_CAINFO.3
@@ -48,6 +48,9 @@ option is supported for backward compatibility with other SSL 
engines, but it
 should not be set. If the option is not set, then curl will use the
 certificates in the system and user Keychain to verify the peer, which is the
 preferred method of verifying the peer's certificate chain.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 Built-in system specific
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_CAPATH.3 
b/docs/libcurl/opts/CURLOPT_PROXY_CAPATH.3
index 871d8c9b8..372cc9503 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_CAPATH.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_CAPATH.3
@@ -33,6 +33,9 @@ CA certificates to verify the HTTPS proxy with. If libcurl is 
built against
 OpenSSL, the certificate directory must be prepared using the openssl c_rehash
 utility. This makes sense only when \fICURLOPT_SSL_VERIFYPEER(3)\fP is enabled
 (which it is by default).
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_CRLFILE.3 
b/docs/libcurl/opts/CURLOPT_PROXY_CRLFILE.3
index f9d445767..9a079a923 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_CRLFILE.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_CRLFILE.3
@@ -47,6 +47,9 @@ A specific error code (\fICURLE_SSL_CRL_BADFILE\fP) is 
defined with the
 option. It is returned when the SSL exchange fails because the CRL file cannot
 be loaded.  A failure in certificate verification due to a revocation
 information found in the CRL does not trigger this specific error.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_KEYPASSWD.3 
b/docs/libcurl/opts/CURLOPT_PROXY_KEYPASSWD.3
index bddecd124..50019e108 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_KEYPASSWD.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_KEYPASSWD.3
@@ -34,6 +34,9 @@ Pass a pointer to a zero terminated string as parameter. It 
will be used as
 the password required to use the \fICURLOPT_PROXY_SSLKEY(3)\fP private key.
 You never needed a pass phrase to load a certificate but you need one to load
 your private key.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_PINNEDPUBLICKEY.3 
b/docs/libcurl/opts/CURLOPT_PROXY_PINNEDPUBLICKEY.3
index db2cd70e0..ebe3d7fd2 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_PINNEDPUBLICKEY.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_PINNEDPUBLICKEY.3
@@ -39,6 +39,9 @@ if it does not exactly match the public key provided to this 
option, curl will
 abort the connection before sending or receiving any data.
 
 On mismatch, \fICURLE_SSL_PINNEDPUBKEYNOTMATCH\fP is returned.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_SERVICE_NAME.3 
b/docs/libcurl/opts/CURLOPT_PROXY_SERVICE_NAME.3
index a010382fd..27467d955 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_SERVICE_NAME.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_SERVICE_NAME.3
@@ -31,6 +31,9 @@ CURLcode curl_easy_setopt(CURL *handle, 
CURLOPT_PROXY_SERVICE_NAME, char *name);
 Pass a char * as parameter to a string holding the \fIname\fP of the
 service. The default service name is "HTTP" for HTTP based proxies and "rcmd"
 for SOCKS5. This option allows you to change it.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 See above
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_SSLCERT.3 
b/docs/libcurl/opts/CURLOPT_PROXY_SSLCERT.3
index 9d3c029a0..c1b7f27f0 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_SSLCERT.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_SSLCERT.3
@@ -42,6 +42,9 @@ prefix, in order to avoid confusion with a nickname.
 
 When using a client certificate, you most likely also need to provide a
 private key with \fICURLOPT_PROXY_SSLKEY(3)\fP.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_SSLCERTTYPE.3 
b/docs/libcurl/opts/CURLOPT_PROXY_SSLCERTTYPE.3
index 72c7bf491..5e8aa4b29 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_SSLCERTTYPE.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_SSLCERTTYPE.3
@@ -34,6 +34,9 @@ the format of your client certificate used when connecting to 
a HTTPS proxy.
 Supported formats are "PEM" and "DER", except with Secure Transport. OpenSSL
 (versions 0.9.3 and later) and Secure Transport (on iOS 5 or later, or OS X
 10.7 or later) also support "P12" for PKCS#12-encoded files.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 "PEM"
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_SSLKEY.3 
b/docs/libcurl/opts/CURLOPT_PROXY_SSLKEY.3
index 12c3e6850..b38f8c01d 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_SSLKEY.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_SSLKEY.3
@@ -36,6 +36,9 @@ default format is "PEM" and can be changed with
 (iOS and Mac OS X only) This option is ignored if curl was built against
 Secure Transport. Secure Transport expects the private key to be already
 present in the keychain or PKCS#12 file containing the certificate.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_SSLKEYTYPE.3 
b/docs/libcurl/opts/CURLOPT_PROXY_SSLKEYTYPE.3
index c167b6d58..66e7ce8e0 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_SSLKEYTYPE.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_SSLKEYTYPE.3
@@ -32,6 +32,9 @@ This option is for connecting to a HTTPS proxy, not a HTTPS 
server.
 
 Pass a pointer to a zero terminated string as parameter. The string should be
 the format of your private key. Supported formats are "PEM", "DER" and "ENG".
+
+The application does not have to keep the string around after setting this
+option.
 .SH PROTOCOLS
 Used with HTTPS proxy
 .SH EXAMPLE
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_SSL_CIPHER_LIST.3 
b/docs/libcurl/opts/CURLOPT_PROXY_SSL_CIPHER_LIST.3
index 54b3646d7..5cff16d4d 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_SSL_CIPHER_LIST.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_SSL_CIPHER_LIST.3
@@ -50,6 +50,9 @@ enabled.
 You'll find more details about the NSS cipher lists on this URL:
 
  
http://git.fedorahosted.org/cgit/mod_nss.git/plain/docs/mod_nss.html#Directives
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL, use internal default
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_PASSWORD.3 
b/docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_PASSWORD.3
index 809ffb27b..b9b6232d7 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_PASSWORD.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_PASSWORD.3
@@ -32,6 +32,9 @@ Pass a char * as parameter, which should point to the zero 
terminated password
 to use for the TLS authentication method specified with the
 \fICURLOPT_PROXY_TLSAUTH_TYPE(3)\fP option. Requires that the
 \fICURLOPT_PROXY_TLSAUTH_USERNAME(3)\fP option also be set.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_TYPE.3 
b/docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_TYPE.3
index dbf00b671..5a30a785c 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_TYPE.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_TYPE.3
@@ -38,6 +38,9 @@ defined in RFC5054 and provides mutual authentication if both 
sides have a
 shared secret. To use TLS-SRP, you must also set the
 \fICURLOPT_PROXY_TLSAUTH_USERNAME(3)\fP and
 \fICURLOPT_PROXY_TLSAUTH_PASSWORD(3)\fP options.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 blank
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_USERNAME.3 
b/docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_USERNAME.3
index 2a2c8669b..3ba4ef955 100644
--- a/docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_USERNAME.3
+++ b/docs/libcurl/opts/CURLOPT_PROXY_TLSAUTH_USERNAME.3
@@ -32,6 +32,9 @@ Pass a char * as parameter, which should point to the zero 
terminated username
 to use for the HTTPS proxy TLS authentication method specified with the
 \fICURLOPT_PROXY_TLSAUTH_TYPE(3)\fP option. Requires that the
 \fICURLOPT_PROXY_TLSAUTH_PASSWORD(3)\fP option also be set.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_RANDOM_FILE.3 
b/docs/libcurl/opts/CURLOPT_RANDOM_FILE.3
index c82232505..4c3e13fe4 100644
--- a/docs/libcurl/opts/CURLOPT_RANDOM_FILE.3
+++ b/docs/libcurl/opts/CURLOPT_RANDOM_FILE.3
@@ -30,6 +30,9 @@ CURLcode curl_easy_setopt(CURL *handle, CURLOPT_RANDOM_FILE, 
char *path);
 .SH DESCRIPTION
 Pass a char * to a zero terminated file name. The file will be used to read
 from to seed the random engine for SSL and more.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL, not used
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_RANGE.3 
b/docs/libcurl/opts/CURLOPT_RANGE.3
index 375a944c6..e90696c01 100644
--- a/docs/libcurl/opts/CURLOPT_RANGE.3
+++ b/docs/libcurl/opts/CURLOPT_RANGE.3
@@ -44,6 +44,9 @@ RTSP, byte ranges are \fBnot\fP permitted. Instead, ranges 
should be given in
 npt, utc, or smpte formats.
 
 Pass a NULL to this option to disable the use of ranges.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_REFERER.3 
b/docs/libcurl/opts/CURLOPT_REFERER.3
index 71aae83f7..881f48c9e 100644
--- a/docs/libcurl/opts/CURLOPT_REFERER.3
+++ b/docs/libcurl/opts/CURLOPT_REFERER.3
@@ -32,6 +32,9 @@ Pass a pointer to a zero terminated string as parameter. It 
will be used to
 set the Referer: header in the http request sent to the remote server. This
 can be used to fool servers or scripts. You can also set any custom header
 with \fICURLOPT_HTTPHEADER(3)\fP.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_RTSP_SESSION_ID.3 
b/docs/libcurl/opts/CURLOPT_RTSP_SESSION_ID.3
index cd3189939..8f5cdff10 100644
--- a/docs/libcurl/opts/CURLOPT_RTSP_SESSION_ID.3
+++ b/docs/libcurl/opts/CURLOPT_RTSP_SESSION_ID.3
@@ -34,6 +34,9 @@ set to any non-NULL value, libcurl will return 
\fICURLE_RTSP_SESSION_ERROR\fP
 if ID received from the server does not match. If unset (or set to NULL),
 libcurl will automatically set the ID the first time the server sets it in a
 response.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_RTSP_STREAM_URI.3 
b/docs/libcurl/opts/CURLOPT_RTSP_STREAM_URI.3
index 1abb61f6d..356455bd4 100644
--- a/docs/libcurl/opts/CURLOPT_RTSP_STREAM_URI.3
+++ b/docs/libcurl/opts/CURLOPT_RTSP_STREAM_URI.3
@@ -38,6 +38,9 @@ with RTSP, the \fICURLOPT_RTSP_STREAM_URI(3)\fP indicates 
what URL to send to
 the server in the request header while the \fICURLOPT_URL(3)\fP indicates
 where to make the connection to.  (e.g. the \fICURLOPT_URL(3)\fP for the above
 examples might be set to \fIrtsp://foo/twister\fP
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 '*'
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_RTSP_TRANSPORT.3 
b/docs/libcurl/opts/CURLOPT_RTSP_TRANSPORT.3
index 367236b60..52d607845 100644
--- a/docs/libcurl/opts/CURLOPT_RTSP_TRANSPORT.3
+++ b/docs/libcurl/opts/CURLOPT_RTSP_TRANSPORT.3
@@ -34,6 +34,9 @@ Pass a char * to tell libcurl what to pass for the Transport: 
header for this
 RTSP session. This is mainly a convenience method to avoid needing to set a
 custom Transport: header for every SETUP request. The application must set a
 Transport: header before issuing a SETUP request.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_SERVICE_NAME.3 
b/docs/libcurl/opts/CURLOPT_SERVICE_NAME.3
index b9f491b03..baed963db 100644
--- a/docs/libcurl/opts/CURLOPT_SERVICE_NAME.3
+++ b/docs/libcurl/opts/CURLOPT_SERVICE_NAME.3
@@ -32,6 +32,9 @@ Pass a char * as parameter to a string holding the \fIname\fP 
of the service
 for DIGEST-MD5, SPNEGO and Kerberos 5 authentication mechanisms. The default
 service names are "ftp", "HTTP", "imap", "pop" and "smtp". This option allows
 you to change them.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 See above
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_SOCKS5_GSSAPI_SERVICE.3 
b/docs/libcurl/opts/CURLOPT_SOCKS5_GSSAPI_SERVICE.3
index 440f0894f..1eda29c8a 100644
--- a/docs/libcurl/opts/CURLOPT_SOCKS5_GSSAPI_SERVICE.3
+++ b/docs/libcurl/opts/CURLOPT_SOCKS5_GSSAPI_SERVICE.3
@@ -33,6 +33,9 @@ Deprecated since 7.49.0. Use 
\fICURLOPT_PROXY_SERVICE_NAME(3)\fP instead.
 Pass a char * as parameter to a string holding the \fIname\fP of the service.
 The default service name for a SOCKS5 server is "rcmd". This option allows you
 to change it.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 See above
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_SSH_HOST_PUBLIC_KEY_MD5.3 
b/docs/libcurl/opts/CURLOPT_SSH_HOST_PUBLIC_KEY_MD5.3
index 2ea236024..d9001b55b 100644
--- a/docs/libcurl/opts/CURLOPT_SSH_HOST_PUBLIC_KEY_MD5.3
+++ b/docs/libcurl/opts/CURLOPT_SSH_HOST_PUBLIC_KEY_MD5.3
@@ -33,6 +33,9 @@ CURLcode curl_easy_setopt(CURL *handle, 
CURLOPT_SSH_HOST_PUBLIC_KEY_MD5,
 Pass a char * pointing to a string containing 32 hexadecimal digits. The
 string should be the 128 bit MD5 checksum of the remote host's public key, and
 libcurl will reject the connection to the host unless the md5sums match.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_SSH_KNOWNHOSTS.3 
b/docs/libcurl/opts/CURLOPT_SSH_KNOWNHOSTS.3
index 9ea0c8647..e82ee4247 100644
--- a/docs/libcurl/opts/CURLOPT_SSH_KNOWNHOSTS.3
+++ b/docs/libcurl/opts/CURLOPT_SSH_KNOWNHOSTS.3
@@ -34,6 +34,9 @@ format as supported by libssh2. If this file is specified, 
libcurl will only
 accept connections with hosts that are known and present in that file, with a
 matching public key. Use \fICURLOPT_SSH_KEYFUNCTION(3)\fP to alter the default
 behavior on host and key (mis)matching.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_SSH_PRIVATE_KEYFILE.3 
b/docs/libcurl/opts/CURLOPT_SSH_PRIVATE_KEYFILE.3
index 0c35ed55a..7c24a903a 100644
--- a/docs/libcurl/opts/CURLOPT_SSH_PRIVATE_KEYFILE.3
+++ b/docs/libcurl/opts/CURLOPT_SSH_PRIVATE_KEYFILE.3
@@ -36,6 +36,9 @@ is set, and just "id_dsa" in the current directory if HOME is 
not set.
 
 If the file is password-protected, set the password with
 \fICURLOPT_KEYPASSWD(3)\fP.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 As explained above
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_SSH_PUBLIC_KEYFILE.3 
b/docs/libcurl/opts/CURLOPT_SSH_PUBLIC_KEYFILE.3
index f9aaeaef3..1dbdf6595 100644
--- a/docs/libcurl/opts/CURLOPT_SSH_PUBLIC_KEYFILE.3
+++ b/docs/libcurl/opts/CURLOPT_SSH_PUBLIC_KEYFILE.3
@@ -38,6 +38,9 @@ set.
 If NULL (or an empty string) is passed, libcurl will pass no public key to
 libssh2, which then tries to compute it from the private key.  This is known
 to work with libssh2 1.4.0+ linked against OpenSSL.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_SSLCERT.3 
b/docs/libcurl/opts/CURLOPT_SSLCERT.3
index b5d68cf79..dd6e48b19 100644
--- a/docs/libcurl/opts/CURLOPT_SSLCERT.3
+++ b/docs/libcurl/opts/CURLOPT_SSLCERT.3
@@ -40,6 +40,9 @@ prefix, in order to avoid confusion with a nickname.
 
 When using a client certificate, you most likely also need to provide a
 private key with \fICURLOPT_SSLKEY(3)\fP.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_SSLCERTTYPE.3 
b/docs/libcurl/opts/CURLOPT_SSLCERTTYPE.3
index 98df39d7a..d68362a01 100644
--- a/docs/libcurl/opts/CURLOPT_SSLCERTTYPE.3
+++ b/docs/libcurl/opts/CURLOPT_SSLCERTTYPE.3
@@ -33,6 +33,9 @@ the format of your certificate. Supported formats are "PEM" 
and "DER", except
 with Secure Transport. OpenSSL (versions 0.9.3 and later) and Secure Transport
 (on iOS 5 or later, or OS X 10.7 or later) also support "P12" for
 PKCS#12-encoded files.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 "PEM"
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_SSLENGINE.3 
b/docs/libcurl/opts/CURLOPT_SSLENGINE.3
index d0c48a4b2..c691a85c8 100644
--- a/docs/libcurl/opts/CURLOPT_SSLENGINE.3
+++ b/docs/libcurl/opts/CURLOPT_SSLENGINE.3
@@ -30,6 +30,9 @@ CURLcode curl_easy_setopt(CURL *handle, CURLOPT_SSLENGINE, 
char *id);
 .SH DESCRIPTION
 Pass a pointer to a zero terminated string as parameter. It will be used as
 the identifier for the crypto engine you want to use for your private key.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_SSLKEY.3 
b/docs/libcurl/opts/CURLOPT_SSLKEY.3
index 8bc82058b..b8027c4b3 100644
--- a/docs/libcurl/opts/CURLOPT_SSLKEY.3
+++ b/docs/libcurl/opts/CURLOPT_SSLKEY.3
@@ -35,6 +35,9 @@ changed with \fICURLOPT_SSLKEYTYPE(3)\fP.
 (iOS and Mac OS X only) This option is ignored if curl was built against
 Secure Transport. Secure Transport expects the private key to be already
 present in the keychain or PKCS#12 file containing the certificate.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_SSLKEYTYPE.3 
b/docs/libcurl/opts/CURLOPT_SSLKEYTYPE.3
index 7616a3f44..2e044346a 100644
--- a/docs/libcurl/opts/CURLOPT_SSLKEYTYPE.3
+++ b/docs/libcurl/opts/CURLOPT_SSLKEYTYPE.3
@@ -35,6 +35,9 @@ The format "ENG" enables you to load the private key from a 
crypto engine. In
 this case \fICURLOPT_SSLKEY(3)\fP is used as an identifier passed to the
 engine. You have to set the crypto engine with \fICURLOPT_SSLENGINE(3)\fP.
 \&"DER" format key file currently does not work because of a bug in OpenSSL.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 "PEM"
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_SSL_CIPHER_LIST.3 
b/docs/libcurl/opts/CURLOPT_SSL_CIPHER_LIST.3
index 5f3668a72..ddf2c05b0 100644
--- a/docs/libcurl/opts/CURLOPT_SSL_CIPHER_LIST.3
+++ b/docs/libcurl/opts/CURLOPT_SSL_CIPHER_LIST.3
@@ -49,6 +49,9 @@ enabled.
 
 For WolfSSL, valid examples of cipher lists include
 \'ECDHE-RSA-RC4-SHA\', 'AES256-SHA:AES256-SHA256', etc.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL, use internal default
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_TLSAUTH_PASSWORD.3 
b/docs/libcurl/opts/CURLOPT_TLSAUTH_PASSWORD.3
index 78fad0efb..c6b6a7410 100644
--- a/docs/libcurl/opts/CURLOPT_TLSAUTH_PASSWORD.3
+++ b/docs/libcurl/opts/CURLOPT_TLSAUTH_PASSWORD.3
@@ -32,6 +32,9 @@ Pass a char * as parameter, which should point to the zero 
terminated password
 to use for the TLS authentication method specified with the
 \fICURLOPT_TLSAUTH_TYPE(3)\fP option. Requires that the
 \fICURLOPT_TLSAUTH_USERNAME(3)\fP option also be set.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_TLSAUTH_TYPE.3 
b/docs/libcurl/opts/CURLOPT_TLSAUTH_TYPE.3
index 5655e7d71..8620423da 100644
--- a/docs/libcurl/opts/CURLOPT_TLSAUTH_TYPE.3
+++ b/docs/libcurl/opts/CURLOPT_TLSAUTH_TYPE.3
@@ -37,6 +37,9 @@ defined in RFC5054 and provides mutual authentication if both 
sides have a
 shared secret. To use TLS-SRP, you must also set the
 \fICURLOPT_TLSAUTH_USERNAME(3)\fP and \fICURLOPT_TLSAUTH_PASSWORD(3)\fP
 options.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 blank
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_TLSAUTH_USERNAME.3 
b/docs/libcurl/opts/CURLOPT_TLSAUTH_USERNAME.3
index 5022e4e08..a9b46e3e8 100644
--- a/docs/libcurl/opts/CURLOPT_TLSAUTH_USERNAME.3
+++ b/docs/libcurl/opts/CURLOPT_TLSAUTH_USERNAME.3
@@ -32,6 +32,9 @@ Pass a char * as parameter, which should point to the zero 
terminated username
 to use for the TLS authentication method specified with the
 \fICURLOPT_TLSAUTH_TYPE(3)\fP option. Requires that the
 \fICURLOPT_TLSAUTH_PASSWORD(3)\fP option also be set.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_UNIX_SOCKET_PATH.3 
b/docs/libcurl/opts/CURLOPT_UNIX_SOCKET_PATH.3
index ed2b91b55..8cf4d24ea 100644
--- a/docs/libcurl/opts/CURLOPT_UNIX_SOCKET_PATH.3
+++ b/docs/libcurl/opts/CURLOPT_UNIX_SOCKET_PATH.3
@@ -46,6 +46,9 @@ are not supported. Proxy options such as
 .BR CURLOPT_PROXY "(3)
 have no effect either as these are TCP-oriented, and asking a proxy server to
 connect to a certain Unix domain socket is not possible.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 Default is NULL, meaning that no Unix domain sockets are used.
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_URL.3 b/docs/libcurl/opts/CURLOPT_URL.3
index a7d81df2c..879f18323 100644
--- a/docs/libcurl/opts/CURLOPT_URL.3
+++ b/docs/libcurl/opts/CURLOPT_URL.3
@@ -283,6 +283,9 @@ user wants to pass in a '#' (hash) character it will be 
treated as a fragment
 and get cut off by libcurl if provided literally. You will instead have to
 escape it by providing it as backslash and its ASCII value in hexadecimal:
 "\\23".
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 There is no default URL. If this option isn't set, no transfer can be
 performed.
diff --git a/docs/libcurl/opts/CURLOPT_USERAGENT.3 
b/docs/libcurl/opts/CURLOPT_USERAGENT.3
index c769e955a..bf58f2bc9 100644
--- a/docs/libcurl/opts/CURLOPT_USERAGENT.3
+++ b/docs/libcurl/opts/CURLOPT_USERAGENT.3
@@ -32,6 +32,9 @@ Pass a pointer to a zero terminated string as parameter. It 
will be used to
 set the User-Agent: header in the HTTP request sent to the remote server. This
 can be used to fool servers or scripts. You can also set any custom header
 with \fICURLOPT_HTTPHEADER(3)\fP.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL, no User-Agent: header is used by default.
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_USERNAME.3 
b/docs/libcurl/opts/CURLOPT_USERNAME.3
index ec6001078..1e4b90fd6 100644
--- a/docs/libcurl/opts/CURLOPT_USERNAME.3
+++ b/docs/libcurl/opts/CURLOPT_USERNAME.3
@@ -55,6 +55,9 @@ authentication as well.
 
 To specify the password and login options, along with the user name, use the
 \fICURLOPT_PASSWORD(3)\fP and \fICURLOPT_LOGIN_OPTIONS(3)\fP options.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 blank
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_USERPWD.3 
b/docs/libcurl/opts/CURLOPT_USERPWD.3
index 19404f6b6..ad5742063 100644
--- a/docs/libcurl/opts/CURLOPT_USERPWD.3
+++ b/docs/libcurl/opts/CURLOPT_USERPWD.3
@@ -61,6 +61,9 @@ SMTP options.
 The user and password strings are not URL decoded, so there's no way to send
 in a user name containing a colon using this option. Use
 \fICURLOPT_USERNAME(3)\fP for that, or include it in the URL.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS
diff --git a/docs/libcurl/opts/CURLOPT_XOAUTH2_BEARER.3 
b/docs/libcurl/opts/CURLOPT_XOAUTH2_BEARER.3
index b6c1feef6..f5c59ac5b 100644
--- a/docs/libcurl/opts/CURLOPT_XOAUTH2_BEARER.3
+++ b/docs/libcurl/opts/CURLOPT_XOAUTH2_BEARER.3
@@ -34,6 +34,9 @@ the OAuth 2.0 Authorization Framework.
 
 Note: The user name used to generate the Bearer Token should be supplied via
 the \fICURLOPT_USERNAME(3)\fP option.
+
+The application does not have to keep the string around after setting this
+option.
 .SH DEFAULT
 NULL
 .SH PROTOCOLS

-- 
To stop receiving notification emails like this one, please contact
address@hidden