[GNUnet-SVN] [gnunet-texinfo] 01/04: some more warnings eliminated

[gnunet]

This is an automated email from the git hooks/post-receive script.

ng0 pushed a commit to branch master
in repository gnunet-texinfo.

commit f933a2218e3f88e83ffdc756af790843a93473b9
Author: Adriano Peluso <address@hidden>
AuthorDate: Sat May 20 11:55:27 2017 +0200

    some more warnings eliminated
    
    Signed-off-by: ng0 <address@hidden>
---
 installation.texi | 59 +++++++++++++++++++++++++++++++++++++------------------
 1 file changed, 40 insertions(+), 19 deletions(-)

diff --git a/installation.texi b/installation.texi
index a3e4a16..fcd5d3f 100644
--- a/installation.texi
+++ b/installation.texi
@@ -19,10 +19,18 @@ profile ID number included. We will then relax these 
restrictions on your
 account. We're sorry for this inconvenience; however, few people would want to
 read this site if 99% of it was advertisements for bogus websites.
 
+
+
 @menu
-* Dependencies
-* External dependencies
-* Internal dependencies
+* Dependencies::
+* Generic installation instructions::
+* Build instructions for Ubuntu 12.04 using Git::
+* Build Instructions for Microsoft Windows Platforms::
+* Installing GNUnet 0.10.1 on Ubuntu 14.04::
+* Build instructions for Debian 8::
+* Outdated build instructions for previous revisions::
+* Portable GNUnet::
+* Graphical interface::
 @end menu
 
 @node Dependencies
@@ -32,6 +40,13 @@ read this site if 99% of it was advertisements for bogus 
websites.
 This document lists the various known dependencies for GNUnet 0.10.x.
 Suggestions for missing dependencies or wrong version numbers are welcome.
 
+
+
address@hidden
+* External dependencies::
+* Internal dependencies::
address@hidden menu
+
 @node External dependencies
 @subsection External dependencies
 @c %**end of header
@@ -411,6 +426,7 @@ system, it should have been created during the installation.
 @node Build instructions for Ubuntu 12.04 using Git
 @section Build instructions for Ubuntu 12.04 using Git
 
+
 @node  Install the required build tools
 @subsection  Install the required build tools
 
@@ -543,9 +559,13 @@ PostgreSQL @code{$ sudo apt-get install libpq-dev 
postgresql}
 
 @end itemize
 
+
+
 @subsection Build GNUnet
 @node Build GNUnet
 
+
+
 @node Configuring the installation path
 @subsubsection Configuring the installation path
 
@@ -556,8 +576,8 @@ when calling the configure script:@code{ --prefix=DIRECTORY}
  $ export PATH=$PATH:DIRECTORY/bin@
 }
 
address@hidden Configuring the system
 @node Configuring the system
address@hidden Configuring the system
 
 Please make sure NOW that you have created a user and group 'gnunet'@
 and additionally a group 'gnunetdns':@
@@ -581,8 +601,9 @@ permissions. To allow these few components to be installed 
use:@
 @code{@
  $ ./configure --with-sudo}
 
address@hidden Build
 @node Build
address@hidden Build
+
 
 @code{@
  $ git clone https://gnunet.org/git/gnunet/@
@@ -2312,7 +2333,7 @@ configured and afterwards started by executing@
 @code{gnunet-arm -s}
 
 @node Graphical interface
address@hidden Graphical interface
address@hidden Graphical interface
 
 If you also would like to use gnunet-gtk and gnunet-setup (highly recommended
 for beginners), do:
@@ -2325,7 +2346,7 @@ sudo ldconfig
 Now you can run @code{gnunet-setup} for easy configuration of your GNUnet peer.
 
 @node Configuring your peer
address@hidden Configuring your peer
address@hidden Configuring your peer
 
 This chapter will describe the various configuration options in GNUnet.
 
@@ -2340,7 +2361,7 @@ While you can also configure your peer by editing the 
configuration file by
 hand, this is not recommended for anyone except for developers.
 
 @node Configuring the Friend-to-Friend (F2F) mode
address@hidden Configuring the Friend-to-Friend (F2F) mode
address@hidden Configuring the Friend-to-Friend (F2F) mode
 
 GNUnet knows three basic modes of operation. In standard "peer-to-peer" mode,
 your peer will connect to any peer. In the pure "friend-to-friend" mode, your
@@ -2372,7 +2393,7 @@ If you want to operate in normal P2P-only mode, simply 
set "MINIMUM-FRIENDS" to
 zero and "FRIENDS_ONLY" to NO. This is the default.
 
 @node Configuring the hostlist to bootstrap
address@hidden Configuring the hostlist to bootstrap
address@hidden Configuring the hostlist to bootstrap
 
 After installing the software you need to get connected to the GNUnet network.
 The configuration file included in your download is already configured to
@@ -2444,7 +2465,7 @@ HOSTLISTFILE = $SERVICEHOME/hostlists.file
 @end example
 
 @node Configuration of the HOSTLIST proxy settings
address@hidden Configuration of the HOSTLIST proxy settings
address@hidden Configuration of the HOSTLIST proxy settings
 
 The hostlist client can be configured to use a proxy to connect to the hostlist
 server. This functionality can be configured in the configuration file directly
@@ -2488,8 +2509,8 @@ following settings in the @code{[hostlist]} section of 
the configuration:@
  # PROXY_PASSWORD =@
 @end example
 
address@hidden Configuring your peer to provide a hostlist 
address@hidden Configuring your peer to provide a hostlist 
address@hidden Configuring your peer to provide a hostlist
address@hidden Configuring your peer to provide a hostlist
 
 If you operate a peer permanently connected to GNUnet you can configure your
 peer to act as a hostlist server, providing other peers the list of peers known
@@ -2548,7 +2569,7 @@ Advertising without providing a hostlist does not make 
sense and will not work.
 @end itemize
 
 @node Configuring the datastore
address@hidden Configuring the datastore
address@hidden Configuring the datastore
 
 The datastore is what GNUnet uses to for long-term storage of file-sharing
 data. Note that long-term does not mean 'forever' since content does have an
@@ -2563,7 +2584,7 @@ datastore, you need to specify which database GNUnet 
should use to do so.
 Currently, you have the choice between sqLite, MySQL and Postgres.
 
 @node Configuring the MySQL database
address@hidden Configuring the MySQL database
address@hidden Configuring the MySQL database
 
 This section describes how to setup the MySQL database for GNUnet.
 
@@ -2595,7 +2616,7 @@ Complex manual setup
 @end itemize
 
 @node Setup Instructions
address@hidden Setup Instructions
address@hidden Setup Instructions
 
 @itemize @bullet
 
@@ -2637,7 +2658,7 @@ password=$the_password_you_like
  Luckily $USER has only priviledges to mess up GNUnet's tables, which should be
  pretty harmless.
 @node Testing
address@hidden Testing
address@hidden Testing
 
 You should briefly try if the database connection works. First, login as $USER.
 Then use:
@@ -2654,7 +2675,7 @@ If you get "ERROR 2002: Can't connect to local MySQL 
server@
  "ln -s /var/run/mysqld/mysqld.sock /tmp/mysql.sock"@
  so there may be some additional trouble depending on your mysql setup.
 @node Performance Tuning
address@hidden Performance Tuning
address@hidden Performance Tuning
 
 For GNUnet, you probably want to set the option
 @example
@@ -2673,7 +2694,7 @@ If you want to run the testcases, you must create a 
second database
 used for testing ("make check").
 
 @node Configuring the Postgres database
address@hidden Configuring the Postgres database
address@hidden Configuring the Postgres database
 
 This text describes how to setup the Postgres database for GNUnet.
 
@@ -2750,8 +2771,8 @@ $ createdb gnunetcheck # this way you can run "make check"
 
 Now you should be able to start @code{gnunet-arm}.
 
address@hidden Testing the setup manually
 @node Testing the setup manually
address@hidden Testing the setup manually
 
 You may want to try if the database connection works. First, again login as
 the user who will run gnunet-arm. Then use,

-- 
To stop receiving notification emails like this one, please contact
address@hidden