Re: [gpsd-dev] Bug: Devices don't always respond if added while WATCH active...

[Ed W]

OK, I think there is some bug ticked with likely "-n" (and possibly
"-G", but not tested)

With "-n", running "gpspipe -r", then adding a device using gpsdctl, I
have managed to get the gpsd output to look like it's hung (-D 5).  In
fact I *suspect* that the issue is that the baud rate is actually 115200
(so says stty), but gpsd says 9600 (which the gpsd needs) and hence no
output

Any chance of a quick fix?


gpsd:IO: => client(0):
{"class":"VERSION","release":"3.2","rev":"2011-10-27T18:32:04.23","proto_major":3,"proto_minor":6}\x0d\x0a
gpsd:PROG: checking client(0)
gpsd:IO: <= client(0): ?WATCH={"enable":true,"nmea":true};\x0a
gpsd:IO: => client(0):
{"class":"DEVICES","devices":[]}\x0d\x0a{"class":"WATCH","enable":true,"json":false,"nmea":true,"raw":0,"scaled":false,"timing":false}\x0d\x0a
gpsd:PROG: checking client(0)
gpsd:INFO: detaching ::1 (sub 0, fd 11) in detach_client
gpsd:IO: => client(0):
{"class":"VERSION","release":"3.2","rev":"2011-10-27T18:32:04.23","proto_major":3,"proto_minor":6}\x0d\x0a
gpsd:PROG: checking client(0)
gpsd:IO: <= client(0): ?WATCH={"enable":true,"nmea":true};\x0a
gpsd:IO: => client(0):
{"class":"DEVICES","devices":[]}\x0d\x0a{"class":"WATCH","enable":true,"json":false,"nmea":true,"raw":0,"scaled":false,"timing":false}\x0d\x0a
gpsd:INFO: control socket connect on fd 12
gpsd:IO: <= control(12):
+/dev/ttyUSB6\x0d\x0aON","release":"3.2","rev":"2011-10-27T18:32:04.23","proto_major":3,"proto_minor":6}\x0d\x0a
gpsd:INFO: <= control(12): adding /dev/ttyUSB6
gpsd:INFO: NTPD ntpd_link_activate: 1
gpsd:INFO: stashing device /dev/ttyUSB6 at slot 0
gpsd:PROG: no /etc/gpsd/device-hook present, skipped running ACTIVATE hook
gpsd:INFO: opening GPS data source type 3 at '/dev/ttyUSB6'
gpsd:PROG: PPS Create Thread gpsd_ppsmonitor
gpsd:INFO: speed 9600, 8N1
gpsd:PROG: Probing "Garmin USB binary" driver...
gpsd:INFO: attempting USB device enumeration.
gpsd:INFO: 1d6b:0002 (bus 1, device 1)
gpsd:INFO: 1d6b:0001 (bus 2, device 1)
gpsd:INFO: 05e3:0608 (bus 1, device 2)
gpsd:INFO: 067b:2303 (bus 2, device 4)
gpsd:INFO: 12d1:1001 (bus 1, device 12)
gpsd:INFO: 10c4:ea60 (bus 1, device 13)
gpsd:SHOUT: vendor/product match with 091e:0003 not found
gpsd:PROG: Probe not found "Garmin USB binary" driver...
gpsd:PROG: Probing "GeoStar binary" driver...
gpsd:IO: Sent GeoStar packet id 0xc1
gpsd:PROG: PPS chrony socket /tmp/chrony.ttyUSB6.sock doesn't exist
gpsd:IO: => GPS: 5053474700c100010000000050924746
gpsd:PROG: PPS gpsd_ppsmonitor exited???
gpsd:PROG: Probe not found "GeoStar binary" driver...
gpsd:PROG: Probing "Trimble TSIP" driver...
gpsd:INFO: speed 9600, 8O1
gpsd:INFO: speed 9600, 8N1
gpsd:PROG: Probe not found "Trimble TSIP" driver...
gpsd:PROG: no probe matched...
gpsd:INFO: gpsd_activate(): activated GPS (fd 13)
gpsd:INFO: device /dev/ttyUSB6 activated
gpsd:IO: => client(0):
{"class":"DEVICE","path":"/dev/ttyUSB6","activated":1319739797.177082}\x0d\x0a