[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-dev] ARM port problem in rtcm3.2 handling
From: |
Frank Nicholas |
Subject: |
Re: [gpsd-dev] ARM port problem in rtcm3.2 handling |
Date: |
Wed, 20 Apr 2016 18:45:02 -0400 |
> On Apr 20, 2016, at 4:04 PM, Hal Murray <address@hidden> wrote:
>
> How does the ARM chip on the Pi get off the ground? I'm looking for the
> first few instructions. They are typically in a Flash chip someplace but I
> don't remember seeing discussions of that for the Pi.
>
The Raspberry Pi starts by loading these files from /boot:
loader.bin & start.elf
Details are in this thread:
https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=6685
- [gpsd-dev] ARM port problem in rtcm3.2 handling, Eric S. Raymond, 2016/04/20
- Re: [gpsd-dev] ARM port problem in rtcm3.2 handling, Gary E. Miller, 2016/04/20
- Re: [gpsd-dev] ARM port problem in rtcm3.2 handling, Eric S. Raymond, 2016/04/20
- Re: [gpsd-dev] ARM port problem in rtcm3.2 handling, Paul Fertser, 2016/04/21
- Re: [gpsd-dev] ARM port problem in rtcm3.2 handling, Gary E. Miller, 2016/04/21
- Re: [gpsd-dev] ARM port problem in rtcm3.2 handling, Hal Murray, 2016/04/21
- Re: [gpsd-dev] ARM port problem in rtcm3.2 handling, Gary E. Miller, 2016/04/21
- Re: [gpsd-dev] ARM port problem in rtcm3.2 handling, Eric S. Raymond, 2016/04/21
- Re: [gpsd-dev] ARM port problem in rtcm3.2 handling, Hal Murray, 2016/04/21
- Re: [gpsd-dev] ARM port problem in rtcm3.2 handling, Eric S. Raymond, 2016/04/21