[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-users] Ublox EVK-M8T
From: |
Denny Page |
Subject: |
Re: [gpsd-users] Ublox EVK-M8T |
Date: |
Tue, 19 Sep 2017 13:34:45 -0700 |
> On Sep 19, 2017, at 07:46, John Klug <address@hidden> wrote:
>
> gpsctl -t 'u-blox' -s $GPS_BAUD -b -f $GPS_LINE
> gpsctl -T 2 -f $GPS_LINE
> stty -F $GPS_LINE $GPS_BAUD
John,
I’m confused regarding the intent of the second gpsctl…
If the baud rate on the port (and unit) is originally at a rate of 115200, then
the second gpsctl will succeed and reset the unit to NMEA mode.
If the baud rate on the port (and unit) is originally at a rate of other than
115200, say 9600, then the second gpsctl will sends and receive some garbage
bits, and then time out. But what is the actual effect on the port or the unit?
Thanks,
Denny
- Re: [gpsd-users] Ublox EVK-M8T, John Klug, 2017/09/01
- Re: [gpsd-users] Ublox EVK-M8T, George S., 2017/09/01
- Re: [gpsd-users] Ublox EVK-M8T, Denny Page, 2017/09/04
- Re: [gpsd-users] Ublox EVK-M8T, Denny Page, 2017/09/18
- Re: [gpsd-users] Ublox EVK-M8T, Eric S. Raymond, 2017/09/19
- Re: [gpsd-users] Ublox EVK-M8T, John Klug, 2017/09/19
- Re: [gpsd-users] Ublox EVK-M8T, John Klug, 2017/09/19
- Re: [gpsd-users] Ublox EVK-M8T, Eric S. Raymond, 2017/09/19
- Re: [gpsd-users] Ublox EVK-M8T,
Denny Page <=
- Re: [gpsd-users] Ublox EVK-M8T, Denny Page, 2017/09/19
- Re: [gpsd-users] Ublox EVK-M8T, John Klug, 2017/09/19
- Re: [gpsd-users] Ublox EVK-M8T, Eric S. Raymond, 2017/09/19
- Re: [gpsd-users] Ublox EVK-M8T, Denny Page, 2017/09/19
- Re: [gpsd-users] Ublox EVK-M8T, Gary E. Miller, 2017/09/19
- Re: [gpsd-users] Ublox EVK-M8T, Denny Page, 2017/09/21
- Re: [gpsd-users] Ublox EVK-M8T, Eric S. Raymond, 2017/09/19
- Re: [gpsd-users] Ublox EVK-M8T, Denny Page, 2017/09/19
- Re: [gpsd-users] Ublox EVK-M8T, Gary E. Miller, 2017/09/19
- Re: [gpsd-users] Ublox EVK-M8T, Denny Page, 2017/09/19