[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Groff-commit] groff ChangeLog INSTALL.gen Makefile.in Makefil...
|
From: |
Bernd Warken |
|
Subject: |
[Groff-commit] groff ChangeLog INSTALL.gen Makefile.in Makefil... |
|
Date: |
Mon, 15 Apr 2013 23:40:54 +0000 |
CVSROOT: /cvsroot/groff
Module name: groff
Changes by: Bernd Warken <bwarken> 13/04/15 23:40:54
Modified files:
. : ChangeLog INSTALL.gen Makefile.in Makefile.sub
aclocal.m4 configure
Added files:
. : INSTALL.autotools
Log message:
iUse suitable versions of `GNU autotools' to generate the needed
configuration files.
CVSWeb URLs:
http://cvs.savannah.gnu.org/viewcvs/groff/ChangeLog?cvsroot=groff&r1=1.1410&r2=1.1411
http://cvs.savannah.gnu.org/viewcvs/groff/INSTALL.gen?cvsroot=groff&r1=1.7&r2=1.8
http://cvs.savannah.gnu.org/viewcvs/groff/Makefile.in?cvsroot=groff&r1=1.128&r2=1.129
http://cvs.savannah.gnu.org/viewcvs/groff/Makefile.sub?cvsroot=groff&r1=1.20&r2=1.21
http://cvs.savannah.gnu.org/viewcvs/groff/aclocal.m4?cvsroot=groff&r1=1.60&r2=1.61
http://cvs.savannah.gnu.org/viewcvs/groff/configure?cvsroot=groff&r1=1.93&r2=1.94
http://cvs.savannah.gnu.org/viewcvs/groff/INSTALL.autotools?cvsroot=groff&rev=1.1
Patches:
Index: ChangeLog
===================================================================
RCS file: /cvsroot/groff/groff/ChangeLog,v
retrieving revision 1.1410
retrieving revision 1.1411
diff -u -b -r1.1410 -r1.1411
--- ChangeLog 15 Apr 2013 15:14:31 -0000 1.1410
+++ ChangeLog 15 Apr 2013 23:40:53 -0000 1.1411
@@ -1,3 +1,15 @@
+2013-04-16 Bernd Warken <address@hidden>
+
+ * Makefile.sub: Add `m4/ax_compare_version.m4'.
+
+ * aclocal.m4: Run the latest `aclocal -I m4' which generates a
+ suitable content in that file.
+
+ * INSTALL.autotools: Information of the usage of `GNU autotools'
+ with `groff'.
+
+ * INSTALL.gen: Move `autotool' parts to file `INSTALL.autotools'.
+
2013-04-15 Bernd Warken <address@hidden>
* m4/groff.m4: Replace tabs by spaces. Use a double line between
@@ -31,6 +43,17 @@
2013-04-15 Bernd Warken <address@hidden>
+ * configure.ac: Add information of the macro `GROFF_PERL'.
+
+ * Makefile.in: Add definitions of the macro variables and their
+ address@hidden@' counterparts.
+
+ Run `autoreconf -I m4'.
+
+2013-04-15 Bernd Warken <address@hidden>
+2013-04-15 Werner LEMBERG <address@hidden>
+2013-04-15 Ralph Carderoy <address@hidden>
+
Add Perl test to configuration. During the run of `configure' the
program is broken with error when there is no `Perl' or the `perl'
program is too old.
@@ -40,13 +63,6 @@
most `v5.6.1'. Define variables $PERL and $PERLPATH for the full
name of the `perl' program and $PERLVERSION as the lest version.
- * configure.ac: Add information of the macro `GROFF_PERL'.
-
- * Makefile.in: Add definitions of the macro variables and their
- address@hidden@' counterparts.
-
- Run `autoreconf -I m4'.
-
2013-04-13 Keith Marshall <address@hidden>
Avoid consideration of autotool cache for CVS inclusion.
Index: INSTALL.gen
===================================================================
RCS file: /cvsroot/groff/groff/INSTALL.gen,v
retrieving revision 1.7
retrieving revision 1.8
diff -u -b -r1.7 -r1.8
--- INSTALL.gen 14 Apr 2013 23:49:48 -0000 1.7
+++ INSTALL.gen 15 Apr 2013 23:40:54 -0000 1.8
@@ -51,18 +51,8 @@
version of `autoconf'.
You can also use `autoreconf -I m4' which does the same as `autoconf'
-together with some other internal things. You might get the following
-warnings:
+together with some other internal things. For more information about the
usage of `GNU autotools', see the file `IKNSTALL.autotools'.
- /usr/share/aclocal/gtkglextmm-1.2.m4:225: warning: underquoted \
-definition of AC_GTKGLEXTMM_SUPPORTS_MULTIHEAD
- /usr/share/aclocal/gtkglextmm-1.2.m4:225: run info \
-'(automake)Extending aclocal'
- /usr/share/aclocal/gtkglextmm-1.2.m4:225: or see \
-http://www.gnu.org/software/automake/manual/automake.html#Extending-aclocal
-
-Just ignore this. It is just a small bug that is known, but that was
-not corrected.
The simplest way to compile this package is:
Index: Makefile.in
===================================================================
RCS file: /cvsroot/groff/groff/Makefile.in,v
retrieving revision 1.128
retrieving revision 1.129
diff -u -b -r1.128 -r1.129
--- Makefile.in 15 Apr 2013 14:47:41 -0000 1.128
+++ Makefile.in 15 Apr 2013 23:40:54 -0000 1.129
@@ -483,6 +483,7 @@
"OBJEXT=$(OBJEXT)" \
"OTHERDEVDIRS=$(OTHERDEVDIRS)" \
"PAGE=$(PAGE)" \
+ "PERL=$(PERL)" \
"GHOSTSCRIPT=$(GHOSTSCRIPT)" \
"PSPRINT=$(PSPRINT)" \
"PURIFY=$(PURIFY)" \
Index: Makefile.sub
===================================================================
RCS file: /cvsroot/groff/groff/Makefile.sub,v
retrieving revision 1.20
retrieving revision 1.21
diff -u -b -r1.20 -r1.21
--- Makefile.sub 29 Jan 2013 11:07:11 -0000 1.20
+++ Makefile.sub 15 Apr 2013 23:40:54 -0000 1.21
@@ -37,6 +37,7 @@
conftest*
M4MACROS=\
+ $(srcdir)/m4/ax_compare_version.m4 \
$(srcdir)/m4/codeset.m4 \
$(srcdir)/m4/fcntl-o.m4 \
$(srcdir)/m4/glibc21.m4 \
Index: aclocal.m4
===================================================================
RCS file: /cvsroot/groff/groff/aclocal.m4,v
retrieving revision 1.60
retrieving revision 1.61
diff -u -b -r1.60 -r1.61
--- aclocal.m4 15 Apr 2013 14:47:41 -0000 1.60
+++ aclocal.m4 15 Apr 2013 23:40:54 -0000 1.61
@@ -1,8 +1,7 @@
-# generated automatically by aclocal 1.11.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.13.1 -*- Autoconf -*-
+
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
-# Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -12,1382 +11,81 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-# codeset.m4 serial 4 (gettext-0.18)
-dnl Copyright (C) 2000-2002, 2006, 2008-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_DEFUN([AM_LANGINFO_CODESET],
-[
- AC_CACHE_CHECK([for nl_langinfo and CODESET], [am_cv_langinfo_codeset],
- [AC_TRY_LINK([#include <langinfo.h>],
- [char* cs = nl_langinfo(CODESET); return !cs;],
- [am_cv_langinfo_codeset=yes],
- [am_cv_langinfo_codeset=no])
- ])
- if test $am_cv_langinfo_codeset = yes; then
- AC_DEFINE([HAVE_LANGINFO_CODESET], [1],
- [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
- fi
-])
-
-# glibc21.m4 serial 4
-dnl Copyright (C) 2000-2002, 2004, 2008-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-# Test for the GNU C Library, version 2.1 or newer.
-# From Bruno Haible.
-
-AC_DEFUN([gl_GLIBC21],
- [
- AC_CACHE_CHECK([whether we are using the GNU C Library 2.1 or newer],
- [ac_cv_gnu_library_2_1],
- [AC_EGREP_CPP([Lucky GNU user],
- [
-#include <features.h>
-#ifdef __GNU_LIBRARY__
- #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
- Lucky GNU user
- #endif
-#endif
- ],
- [ac_cv_gnu_library_2_1=yes],
- [ac_cv_gnu_library_2_1=no])
- ]
- )
- AC_SUBST([GLIBC21])
- GLIBC21="$ac_cv_gnu_library_2_1"
- ]
-)
-
-# iconv.m4 serial 11 (gettext-0.18.1)
-dnl Copyright (C) 2000-2002, 2007-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS],
[])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_prog_perl_version.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_PROG_PERL_VERSION([VERSION],[ACTION-IF-TRUE],[ACTION-IF-FALSE])
+#
+# DESCRIPTION
+#
+# Makes sure that perl supports the version indicated. If true the shell
+# commands in ACTION-IF-TRUE are executed. If not the shell commands in
+# ACTION-IF-FALSE are run. Note if $PERL is not set (for example by
+# running AC_CHECK_PROG or AC_PATH_PROG) the macro will fail.
+#
+# Example:
+#
+# AC_PATH_PROG([PERL],[perl])
+# AX_PROG_PERL_VERSION([5.8.0],[ ... ],[ ... ])
+#
+# This will check to make sure that the perl you have supports at least
+# version 5.8.0.
+#
+# NOTE: This macro uses the $PERL variable to perform the check.
+# AX_WITH_PERL can be used to set that variable prior to running this
+# macro. The $PERL_VERSION variable will be valorized with the detected
+# version.
+#
+# LICENSE
+#
+# Copyright (c) 2009 Francesco Salvestrini <address@hidden>
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice
+# and this notice are preserved. This file is offered as-is, without any
+# warranty.
+
+#serial 11
+
+AC_DEFUN([AX_PROG_PERL_VERSION],[
+ AC_REQUIRE([AC_PROG_SED])
+ AC_REQUIRE([AC_PROG_GREP])
+
+ AS_IF([test -n "$PERL"],[
+ ax_perl_version="$1"
+
+ AC_MSG_CHECKING([for perl version])
+ changequote(<<,>>)
+ perl_version=`$PERL --version 2>&1 | $GREP "This is perl" | $SED -e
's/.* v\([0-9]*\.[0-9]*\.[0-9]*\) .*/\1/'`
+ changequote([,])
+ AC_MSG_RESULT($perl_version)
-dnl From Bruno Haible.
-
-AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
-[
- dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([iconv])
-])
-
-AC_DEFUN([AM_ICONV_LINK],
-[
- dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
- dnl those with the standalone portable GNU libiconv installed).
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
-
- dnl Add $INCICONV to CPPFLAGS before performing the following checks,
- dnl because if the user has installed libiconv and not disabled its use
- dnl via --without-libiconv-prefix, he wants to use it. The first
- dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
- am_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
-
- AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- AC_TRY_LINK([#include <stdlib.h>
-#include <iconv.h>],
- [iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);],
- [am_cv_func_iconv=yes])
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBICONV"
- AC_TRY_LINK([#include <stdlib.h>
-#include <iconv.h>],
- [iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);],
- [am_cv_lib_iconv=yes]
- [am_cv_func_iconv=yes])
- LIBS="$am_save_LIBS"
- fi
- ])
- if test "$am_cv_func_iconv" = yes; then
- AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [
- dnl This tests against bugs in AIX 5.1, HP-UX 11.11, Solaris 10.
- am_save_LIBS="$LIBS"
- if test $am_cv_lib_iconv = yes; then
- LIBS="$LIBS $LIBICONV"
- fi
- AC_TRY_RUN([
-#include <iconv.h>
-#include <string.h>
-int main ()
-{
- /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
- returns. */
- {
- iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
- if (cd_utf8_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\342\202\254"; /* EURO SIGN */
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_utf8_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
- /* Test against Solaris 10 bug: Failures are not distinguishable from
- successful returns. */
- {
- iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
- if (cd_ascii_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\263";
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_ascii_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
-#if 0 /* This bug could be worked around by the caller. */
- /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304rger mit b\366sen B\374bchen ohne
Augenma\337";
- char buf[50];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if ((int)res > 0)
- return 1;
- }
- }
-#endif
- /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
- provided. */
- if (/* Try standardized names. */
- iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
- /* Try IRIX, OSF/1 names. */
- && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
- /* Try AIX names. */
- && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
- /* Try HP-UX names. */
- && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
- return 1;
- return 0;
-}], [am_cv_func_iconv_works=yes], [am_cv_func_iconv_works=no],
- [case "$host_os" in
- aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
- *) am_cv_func_iconv_works="guessing yes" ;;
- esac])
- LIBS="$am_save_LIBS"
- ])
- case "$am_cv_func_iconv_works" in
- *no) am_func_iconv=no am_cv_lib_iconv=no ;;
- *) am_func_iconv=yes ;;
- esac
- else
- am_func_iconv=no am_cv_lib_iconv=no
- fi
- if test "$am_func_iconv" = yes; then
- AC_DEFINE([HAVE_ICONV], [1],
- [Define if you have the iconv() function and it works.])
- fi
- if test "$am_cv_lib_iconv" = yes; then
- AC_MSG_CHECKING([how to link with libiconv])
- AC_MSG_RESULT([$LIBICONV])
- else
- dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
- dnl either.
- CPPFLAGS="$am_save_CPPFLAGS"
- LIBICONV=
- LTLIBICONV=
- fi
- AC_SUBST([LIBICONV])
- AC_SUBST([LTLIBICONV])
-])
-
-dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to
-dnl avoid warnings like
-dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required".
-dnl This is tricky because of the way 'aclocal' is implemented:
-dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN.
-dnl Otherwise aclocal's initial scan pass would miss the macro definition.
-dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN
expansions.
-dnl Otherwise aclocal would emit many "Use of uninitialized value $1"
-dnl warnings.
-m4_define([gl_iconv_AC_DEFUN],
- m4_version_prereq([2.64],
- [[AC_DEFUN_ONCE(
- [$1], [$2])]],
- [[AC_DEFUN(
- [$1], [$2])]]))
-gl_iconv_AC_DEFUN([AM_ICONV],
-[
- AM_ICONV_LINK
- if test "$am_cv_func_iconv" = yes; then
- AC_MSG_CHECKING([for iconv declaration])
- AC_CACHE_VAL([am_cv_proto_iconv], [
- AC_TRY_COMPILE([
-#include <stdlib.h>
-#include <iconv.h>
-extern
-#ifdef __cplusplus
-"C"
-#endif
-#if defined(__STDC__) || defined(__cplusplus)
-size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf,
size_t *outbytesleft);
-#else
-size_t iconv();
-#endif
-], [], [am_cv_proto_iconv_arg1=""], [am_cv_proto_iconv_arg1="const"])
- am_cv_proto_iconv="extern size_t iconv (iconv_t cd,
$am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf,
size_t *outbytesleft);"])
- am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/(
/(/'`
- AC_MSG_RESULT([
- $am_cv_proto_iconv])
- AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1],
- [Define as const if the declaration of iconv() needs const.])
- fi
-])
-
-# lib-ld.m4 serial 4 (gettext-0.18)
-dnl Copyright (C) 1996-2003, 2009-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Subroutines of libtool.m4,
-dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
-dnl with libtool.m4.
-
-dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
-AC_DEFUN([AC_LIB_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld],
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- acl_cv_prog_gnu_ld=yes ;;
-*)
- acl_cv_prog_gnu_ld=no ;;
-esac])
-with_gnu_ld=$acl_cv_prog_gnu_ld
-])
-
-dnl From libtool-1.4. Sets the variable LD.
-AC_DEFUN([AC_LIB_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]* | [A-Za-z]:[\\/]*)]
- [re_direlt='/[^/][^/]*/\.\./']
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL([acl_cv_path_LD],
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break ;;
- *)
- test "$with_gnu_ld" != yes && break ;;
- esac
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT([$LD])
-else
- AC_MSG_RESULT([no])
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_LIB_PROG_LD_GNU
-])
-
-# lib-link.m4 serial 21 (gettext-0.18)
-dnl Copyright (C) 2001-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_PREREQ([2.54])
-
-dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
-dnl augments the CPPFLAGS variable.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- pushdef([Name],[translit([$1],[./-], [___])])
- pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
- ac_cv_lib[]Name[]_libs="$LIB[]NAME"
- ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
- ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
- ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
- ])
- LIB[]NAME="$ac_cv_lib[]Name[]_libs"
- LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
- INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
- LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
- dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
- dnl results of this search when this library appears as a dependency.
- HAVE_LIB[]NAME=yes
- popdef([NAME])
- popdef([Name])
-])
+ AC_SUBST([PERL_VERSION],[$perl_version])
-dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode,
[missing-message])
-dnl searches for libname and the libraries corresponding to explicit and
-dnl implicit dependencies, together with the specified include files and
-dnl the ability to compile and link the specified testcode. The missing-message
-dnl defaults to 'no' and may contain additional hints for the user.
-dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME}
-dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and
-dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
-dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- pushdef([Name],[translit([$1],[./-], [___])])
- pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-
- dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
-
- dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
- dnl because if the user has installed lib[]Name and not disabled its use
- dnl via --without-lib[]Name-prefix, he wants to use it.
- ac_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-
- AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
- ac_save_LIBS="$LIBS"
- dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS,
- dnl because these -l options might require -L options that are present in
- dnl LIBS. -l options benefit only from the -L options listed before it.
- dnl Otherwise, add it to the front of LIBS, because it may be a static
- dnl library that depends on another static library that is present in LIBS.
- dnl Static libraries benefit only from the static libraries listed after
- dnl it.
- case " $LIB[]NAME" in
- *" -l"*) LIBS="$LIBS $LIB[]NAME" ;;
- *) LIBS="$LIB[]NAME $LIBS" ;;
- esac
- AC_TRY_LINK([$3], [$4],
- [ac_cv_lib[]Name=yes],
- [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])'])
- LIBS="$ac_save_LIBS"
- ])
- if test "$ac_cv_lib[]Name" = yes; then
- HAVE_LIB[]NAME=yes
- AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.])
- AC_MSG_CHECKING([how to link with lib[]$1])
- AC_MSG_RESULT([$LIB[]NAME])
- else
- HAVE_LIB[]NAME=no
- dnl If $LIB[]NAME didn't lead to a usable library, we don't need
- dnl $INC[]NAME either.
- CPPFLAGS="$ac_save_CPPFLAGS"
- LIB[]NAME=
- LTLIB[]NAME=
- LIB[]NAME[]_PREFIX=
- fi
- AC_SUBST([HAVE_LIB]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
- popdef([NAME])
- popdef([Name])
-])
-
-dnl Determine the platform dependent parameters needed to use rpath:
-dnl acl_libext,
-dnl acl_shlibext,
-dnl acl_hardcode_libdir_flag_spec,
-dnl acl_hardcode_libdir_separator,
-dnl acl_hardcode_direct,
-dnl acl_hardcode_minus_L.
-AC_DEFUN([AC_LIB_RPATH],
-[
- dnl Tell automake >= 1.10 to complain if config.rpath is missing.
- m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
- AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
- AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
- AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
- AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld"
\
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
- ])
- wl="$acl_cv_wl"
- acl_libext="$acl_cv_libext"
- acl_shlibext="$acl_cv_shlibext"
- acl_libname_spec="$acl_cv_libname_spec"
- acl_library_names_spec="$acl_cv_library_names_spec"
- acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- acl_hardcode_direct="$acl_cv_hardcode_direct"
- acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
- dnl Determine whether the user wants rpath handling at all.
- AC_ARG_ENABLE([rpath],
- [ --disable-rpath do not hardcode runtime library paths],
- :, enable_rpath=yes)
-])
-
-dnl AC_LIB_FROMPACKAGE(name, package)
-dnl declares that libname comes from the given package. The configure file
-dnl will then not have a --with-libname-prefix option but a
-dnl --with-package-prefix option. Several libraries can come from the same
-dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar
-dnl macro call that searches for libname.
-AC_DEFUN([AC_LIB_FROMPACKAGE],
-[
- pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- define([acl_frompackage_]NAME, [$2])
- popdef([NAME])
- pushdef([PACK],[$2])
- pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- define([acl_libsinpackage_]PACKUP,
- m4_ifdef([acl_libsinpackage_]PACKUP, [acl_libsinpackage_]PACKUP[[,
]],)[lib$1])
- popdef([PACKUP])
- popdef([PACK])
-])
-
-dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
-dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
-[
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME,
lib[$1])])
- pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME,
[acl_libsinpackage_]PACKUP, lib[$1])])
- dnl Autoconf >= 2.61 supports dots in --with options.
-
pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit(PACK,[.],[_])],PACK)])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_ARG_WITH(P_A_C_K[-prefix],
-[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and
DIR/lib
- --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir
and libdir]],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- if test "$acl_libdirstem2" != "$acl_libdirstem" \
- && ! test -d "$withval/$acl_libdirstem"; then
- additional_libdir="$withval/$acl_libdirstem2"
- fi
- fi
- fi
-])
- dnl Search the library and its dependencies in $additional_libdir and
- dnl $LDFLAGS. Using breadth-first-seach.
- LIB[]NAME=
- LTLIB[]NAME=
- INC[]NAME=
- LIB[]NAME[]_PREFIX=
- dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been
- dnl computed. So it has to be reset here.
- HAVE_LIB[]NAME=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='$1 $2'
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
- dnl or AC_LIB_HAVE_LINKFLAGS call.
- uppername=`echo "$name" | sed -e
'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+
}$value"
- else
- dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
- dnl that this library doesn't exist. So just drop it.
+ AX_COMPARE_VERSION([$ax_perl_version],[le],[$perl_version],[
:
- fi
- else
- dnl Search the library lib$name in $additional_libdir and $LDFLAGS
- dnl and the already constructed $LIBNAME/$LTLIBNAME.
- found_dir=
- found_la=
- found_so=
- found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
- if test $use_additional = yes; then
- dir="$additional_libdir"
- dnl The same code as in the loop below:
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" =
'$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver";
then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" =
'$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done
\
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4
-k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f
"$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- dnl Found the library.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- dnl Linking with a shared library. We attempt to hardcode its
- dnl directory into the executable's runpath, unless it's the
- dnl standard /usr/lib.
- if test "$enable_rpath" = no \
- || test "X$found_dir" = "X/usr/$acl_libdirstem" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
- dnl No hardcoding is needed.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- dnl The hardcoding into $LIBNAME is system dependent.
- if test "$acl_hardcode_direct" = yes; then
- dnl Using DIR/libNAME.so during linking hardcodes DIR into
the
- dnl resulting binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- if test -n "$acl_hardcode_libdir_flag_spec" && test
"$acl_hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode DIR into the
resulting
- dnl binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- dnl Rely on "-L$found_dir".
- dnl But don't add it if it's already contained in the
LDFLAGS
- dnl or the already constructed $LIBNAME
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
- fi
- if test "$acl_hardcode_minus_L" != no; then
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl We cannot use $acl_hardcode_runpath_var and
LD_RUN_PATH
- dnl here, because this doesn't fit in flags passed to the
- dnl compiler. So give up. No hardcoding. This affects
only
- dnl very old systems.
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- dnl Linking with a static library.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
- else
- dnl We shouldn't come here, but anyway it's good to have a
- dnl fallback.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
- fi
- fi
- dnl Assume the include files are nearby.
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e
"s,/$acl_libdirstem/"'*$,,'`
- if test "$name" = '$1'; then
- LIB[]NAME[]_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem2 | */$acl_libdirstem2/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e
"s,/$acl_libdirstem2/"'*$,,'`
- if test "$name" = '$1'; then
- LIB[]NAME[]_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- dnl Potentially add $additional_includedir to $INCNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's /usr/local/include and we are using GCC on
Linux,
- dnl 3. if it's already present in $CPPFLAGS or the already
- dnl constructed $INCNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INC[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $INCNAME.
- INC[]NAME="${INC[]NAME}${INC[]NAME:+
}-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- dnl Look for dependencies.
- if test -n "$found_la"; then
- dnl Read the .la file. It defines the variables
- dnl dlname, library_names, old_library, dependency_libs, current,
- dnl age, revision, installed, dlopen, dlpreopen, libdir.
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- dnl We use only dependency_libs.
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- dnl Potentially add $additional_libdir to $LIBNAME and
$LTLIBNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's /usr/local/lib and we are using GCC on
Linux,
- dnl 3. if it's already present in $LDFLAGS or the already
- dnl constructed $LIBNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
- && test "X$additional_libdir" !=
"X/usr/$acl_libdirstem2"; then
- haveit=
- if test "X$additional_libdir" =
"X/usr/local/$acl_libdirstem" \
- || test "X$additional_libdir" =
"X/usr/local/$acl_libdirstem2"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LIBNAME.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+
}-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LTLIBNAME.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+
}-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the
end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at
the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- dnl Handle this in the next round.
- names_next_round="$names_next_round "`echo "X$dep" | sed
-e 's/^X-l//'`
- ;;
- *.la)
- dnl Handle this in the next round. Throw away the .la's
- dnl directory; it is already contained in a preceding -L
- dnl option.
- names_next_round="$names_next_round "`echo "X$dep" | sed
-e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- dnl Most likely an immediate library name.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
- ;;
- esac
- done
- fi
- else
- dnl Didn't find the library; assume it is in the system directories
- dnl known to the linker and runtime loader. (All the system
- dnl directories known to the linker should also be known to the
- dnl runtime loader, otherwise the system is severely
misconfigured.)
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user must
- dnl pass all path elements in one option. We can arrange that for a
- dnl single library, but not when more than one $LIBNAMEs are used.
- alldirs=
- for found_dir in $rpathdirs; do
-
alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
- done
- dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- else
- dnl The -rpath options are cumulative.
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- dnl When using libtool, the option that works for both libraries and
- dnl executables is -R. The -R options are cumulative.
- for found_dir in $ltrpathdirs; do
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
- done
- fi
- popdef([P_A_C_K])
- popdef([PACKLIBS])
- popdef([PACKUP])
- popdef([PACK])
- popdef([NAME])
-])
-
-dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
-dnl unless already present in VAR.
-dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
-dnl contains two or three consecutive elements that belong together.
-AC_DEFUN([AC_LIB_APPENDTOVAR],
-[
- for element in [$2]; do
- haveit=
- for x in $[$1]; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- [$1]="${[$1]}${[$1]:+ }$element"
- fi
- done
-])
-
-dnl For those cases where a variable contains several -L and -l options
-dnl referring to unknown libraries and directories, this macro determines the
-dnl necessary additional linker options for the runtime path.
-dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
-dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
-dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
-dnl otherwise linking without libtool is assumed.
-AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
-[
- AC_REQUIRE([AC_LIB_RPATH])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- $1=
- if test "$enable_rpath" != no; then
- if test -n "$acl_hardcode_libdir_flag_spec" && test
"$acl_hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode directories into the resulting
- dnl binary.
- rpathdirs=
- next=
- for opt in $2; do
- if test -n "$next"; then
- dir="$next"
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem" \
- && test "X$dir" != "X/usr/$acl_libdirstem2"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next=
- else
- case $opt in
- -L) next=yes ;;
- -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem" \
- && test "X$dir" != "X/usr/$acl_libdirstem2"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next= ;;
- *) next= ;;
- esac
- fi
- done
- if test "X$rpathdirs" != "X"; then
- if test -n ""$3""; then
- dnl libtool is used for linking. Use -R options.
- for dir in $rpathdirs; do
- $1="${$1}${$1:+ }-R$dir"
- done
- else
- dnl The linker is used for linking directly.
- if test -n "$acl_hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user
- dnl must pass all path elements in one option.
- alldirs=
- for dir in $rpathdirs; do
-
alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="$flag"
- else
- dnl The -rpath options are cumulative.
- for dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="${$1}${$1:+ }$flag"
- done
- fi
- fi
- fi
- fi
- fi
- AC_SUBST([$1])
-])
-
-# lib-prefix.m4 serial 7 (gettext-0.18)
-dnl Copyright (C) 2001-2005, 2008-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
-dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
-dnl require excessive bracketing.
-ifdef([AC_HELP_STRING],
-[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
-[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
-
-dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
-dnl to access previously installed libraries. The basic assumption is that
-dnl a user will want packages to use other packages he previously installed
-dnl with the same --prefix option.
-dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
-dnl libraries, but is otherwise very convenient.
-AC_DEFUN([AC_LIB_PREFIX],
-[
- AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_LIB_ARG_WITH([lib-prefix],
-[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
- --without-lib-prefix don't search for libraries in includedir and libdir],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
+ $2
+ ],[
+ :
+ $3
])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- fi
- fi
-])
- if test $use_additional = yes; then
- dnl Potentially add $additional_includedir to $CPPFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's already present in $CPPFLAGS,
- dnl 3. if it's /usr/local/include and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- for x in $CPPFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $CPPFLAGS.
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- dnl Potentially add $additional_libdir to $LDFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's already present in $LDFLAGS,
- dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
- haveit=
- for x in $LDFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
- if test -n "$GCC"; then
- case $host_os in
- linux*) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LDFLAGS.
- LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- fi
-])
-
-dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
-dnl acl_final_exec_prefix, containing the values to which $prefix and
-dnl $exec_prefix will expand at the end of the configure script.
-AC_DEFUN([AC_LIB_PREPARE_PREFIX],
-[
- dnl Unfortunately, prefix and exec_prefix get only finally determined
- dnl at the end of configure.
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
-dnl variables prefix and exec_prefix bound to the values they will have
-dnl at the end of the configure script.
-AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
-[
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- $1
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_PREPARE_MULTILIB creates
-dnl - a variable acl_libdirstem, containing the basename of the libdir, either
-dnl "lib" or "lib64" or "lib/64",
-dnl - a variable acl_libdirstem2, as a secondary possible value for
-dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or
-dnl "lib/amd64".
-AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
-[
- dnl There is no formal standard regarding lib and lib64.
- dnl On glibc systems, the current practice is that on a system supporting
- dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
- dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine
- dnl the compiler's default mode by looking at the compiler's library search
- dnl path. If at least one of its elements ends in /lib64 or points to a
- dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI.
- dnl Otherwise we use the default, namely "lib".
- dnl On Solaris systems, the current practice is that on a system supporting
- dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
- dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or
- dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib.
- AC_REQUIRE([AC_CANONICAL_HOST])
- acl_libdirstem=lib
- acl_libdirstem2=
- case "$host_os" in
- solaris*)
- dnl See Solaris 10 Software Developer Collection > Solaris 64-bit
Developer's Guide > The Development Environment
- dnl <http://docs.sun.com/app/docs/doc/816-5138/dev-env?l=en&a=view>.
- dnl "Portable Makefiles should refer to any library directories using
the 64 symbolic link."
- dnl But we want to recognize the sparcv9 or amd64 subdirectory also if
the
- dnl symlink is missing, so we set acl_libdirstem2 too.
- AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit],
- [AC_EGREP_CPP([sixtyfour bits], [
-#ifdef _LP64
-sixtyfour bits
-#endif
- ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no])
+ ],[
+ AC_MSG_WARN([could not find the perl interpreter])
+ $3
])
- if test $gl_cv_solaris_64bit = yes; then
- acl_libdirstem=lib/64
- case "$host_cpu" in
- sparc*) acl_libdirstem2=lib/sparcv9 ;;
- i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
- esac
- fi
- ;;
- *)
- searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e
's,^libraries: ,,p' | sed -e 's,^=,,'`
- if test -n "$searchpath"; then
- acl_save_IFS="${IFS= }"; IFS=":"
- for searchdir in $searchpath; do
- if test -d "$searchdir"; then
- case "$searchdir" in
- */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
- */../ | */.. )
- # Better ignore directories of this form. They are misleading.
- ;;
- *) searchdir=`cd "$searchdir" && pwd`
- case "$searchdir" in
- */lib64 ) acl_libdirstem=lib64 ;;
- esac ;;
- esac
- fi
- done
- IFS="$acl_save_IFS"
- fi
- ;;
- esac
- test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
])
+m4_include([m4/ax_compare_version.m4])
+m4_include([m4/codeset.m4])
+m4_include([m4/fcntl-o.m4])
+m4_include([m4/glibc21.m4])
+m4_include([m4/groff.m4])
+m4_include([m4/iconv.m4])
+m4_include([m4/lib-ld.m4])
+m4_include([m4/lib-link.m4])
+m4_include([m4/lib-prefix.m4])
+m4_include([m4/localcharset.m4])
Index: configure
===================================================================
RCS file: /cvsroot/groff/groff/configure,v
retrieving revision 1.93
retrieving revision 1.94
diff -u -b -r1.93 -r1.94
--- configure 14 Apr 2013 23:11:08 -0000 1.93
+++ configure 15 Apr 2013 23:40:54 -0000 1.94
@@ -5688,7 +5688,7 @@
fi
- if test "$PERL" = "no"; then
+ if test "x$PERL" = "xno"; then
as_fn_error 1 "perl binary not found" "$LINENO" 5
fi
@@ -5744,7 +5744,7 @@
if test "$ax_compare_version" = "true" ; then
:
- PERLPATH=$PERL
+ true
else
:
@@ -10462,6 +10462,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: missing program$plural:
The program$plural
+
$missing
cannot be found in the PATH.
Consequently, groff's HTML backend (grohtml) will not work properly;
@@ -10471,6 +10472,7 @@
$as_echo "$as_me: WARNING: missing program$plural:
The program$plural
+
$missing
cannot be found in the PATH.
Consequently, groff's HTML backend (grohtml) will not work properly;
Index: INSTALL.autotools
===================================================================
RCS file: INSTALL.autotools
diff -N INSTALL.autotools
--- /dev/null 1 Jan 1970 00:00:00 -0000
+++ INSTALL.autotools 15 Apr 2013 23:40:54 -0000 1.1
@@ -0,0 +1,69 @@
+ Copyright 2013
+ Free Software Foundation, Inc.
+
+ Last Update: 16 Apr 2013
+
+ Copying and distribution of this file, with or without modification,
+ are permitted in any medium without royalty provided the copyright
+ notice and this notice are preserved.
+
+This file contains information that supplements the generic
+installation instructions in file `INSTALL.autotools'.
+
+
+If you want to start compiling the `groff' system with an existing
+script `configure' you won't need the information ion this file.
+
+
+But if you want to use the `GNU autotools' (`aclocal', `autoreconf')
+for creating the following and some more files:
+
+ aclocal.m4
+ configure
+ Makefile
+
+
+To change the file `aclocal.m4', run the shell command
+
+ $ aclocal -I m4
+
+
+To recreate the files `configure' and `Makefile', use the shell command
+
+ $ autoreconf -I m4
+
+
+The option `-I m4' is necessary. It refers to the subdirectory `m4'
+that has files with m4 macro definitions that are needed by the
+`autotools'.
+
+
+If you use an old `autoreconf' version < 2.69, there might be an
+error warning like:
+
+ /usr/share/aclocal/gtkglextmm-1.2.m4:225: warning: underquoted \
+definition of AC_GTKGLEXTMM_SUPPORTS_MULTIHEAD
+ /usr/share/aclocal/gtkglextmm-1.2.m4:225: run info \
+'(automake)Extending aclocal'
+ /usr/share/aclocal/gtkglextmm-1.2.m4:225: or see \
+http://www.gnu.org/software/automake/manual/automake.html#Extending-aclocal
+
+Just ignore this. It doesn't occur in the actual versions of `autoreconf'.
+
+
+You may even use the shell command
+
+ $ autoconf
+
+instead of `autoreconf', but that will ignore some features. So
+`autoreconf' is better.
+
+
+`automake' is not used. `autoreconf' does part of this. If you know
+about creating `Makefile.am' files we are glad to have you for the
+inclusion of `automake'. Take contact with the `groff Mailinglist'.
+
+
+After the use of the `GNU autotools', the usual compilation should
+work. If the run of `configure' produces error reports you have
+produced errors in the `autotools' modification.
- [Groff-commit] groff ChangeLog INSTALL.gen Makefile.in Makefil...,
Bernd Warken <=