[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: GRUB 1.91 on PowerPC ( FC4 ) does not find its conf file
From: |
Dennis Clarke |
Subject: |
Re: GRUB 1.91 on PowerPC ( FC4 ) does not find its conf file |
Date: |
Fri, 28 Oct 2005 06:50:01 -0400 |
On 10/27/05, Hollis Blanchard <address@hidden> wrote:
> On Oct 27, 2005, at 1:45 PM, Dennis Clarke wrote:
/**********************************************************************
*
* There are pictures related to this discussion located here :
* http://www.blastwave.org/dclarke/grub/grub_1.91/day_01/
*
* and
*
* http://www.blastwave.org/dclarke/grub/grub_1.91/day_02/
*
**********************************************************************/
Firstly I just want to say thank you and to let you know that the new
GRUB revision is of great value to me and a lot of other people. I
want to work with this GRUB project in whatever capacity that I can to
help. I am not a super technical programmer but I am quite good at
doing the things that I do. If my tone is somewhat crisp then please
accept my apologies in advance, I am killing a lot of coffee beans in
this process and even having some fun at it!
Dennis
> >
> > ok printenv boot-device
> > boot-device hd:0 (eth)
> >
> > I then boot GRUB like so :
> >
> > boot hd:1 /grub/grubof.modules
>
> This may be the problem. Is that how you normally boot? What about
> "boot hd:1,/grub/grubof.modules" -- does that work?
Let me try that for you right now.
ok boot hd:1,/grub/grubof.modules
error: error while trying to load or boot
ok
http://www.blastwave.org/dclarke/grub/grub_1.91/day_02/img_1284.jpg
> > This then results in the GNU GRUB version 1.91 screen
> >
> > grub> set
> > prefix=(hd)
> > root=hd
>
> From here, please run the following:
> grub> suspend
> ok dev /chosen
> ok .properties
okay .. I will use what works to get grub going ...
ok boot hd:1 /grub/grubof.modules
That works and gets me to GRUB
then I type your commands above ...
grub> suspend
Run 'go' to resume GRUB.
ok dev /chosen
ok .properties
name "chosen"
stdin 0xFDA01A0 (265945504)
stdout 0xFD9FEF8 (265944824)
bootpath "/address@hidden/address@hidden,1/address@hidden,0"
bootargs ""
memory 0xFC54D40 (264588608)
mmu 0xFC55D48 (264592712)
ok
http://www.blastwave.org/dclarke/grub/grub_1.91/day_02/img_1285.jpg
I then type "go" ( without the quotes ) and the screen goes black with
the exception of this single line at the top :
Failed to claim heap at 0x4000, len 0x1fb000
http://www.blastwave.org/dclarke/grub/grub_1.91/day_02/img_1286.jpg
At this point I have a dead machine again. I have to hit the reset button.
> I seem to recall that the Pegasos firmware has a bug that prevents
> "suspend" from working; if that is still the case don't worry about it.
>
> > Perhaps a menu.lst file is required ? The grub.cfg file is not found
> > by default.
>
> No. menu.lst is not a grub2 config file.
> > ps: I should note the simply hitting enter results in Linux starting
> > to boot but then a kernel panic occurs.
>
> Are you saying this is also a GRUB problem? If so we will need some
> details.
I don't know if it is or it isn't. I know that when I boot with
yaboot everything works fine and I am using the same kernel on the
same machine.
Here is what my yaboot.conf file looks like :
address@hidden grub]# cat ../yaboot/yaboot.conf
# yaboot.conf generated by anaconda
boot=/dev/hda
init-message=Welcome to Fedora Core!\nHit <TAB> for boot options
partition=1
timeout=80
install=/usr/lib/yaboot/yaboot
delay=5
enablecdboot
enableofboot
enablenetboot
nonvram
mntpoint=/boot/yaboot
usemount
image=/vmlinuz-2.6.12-1.1456_FC4
label=linux
read-only
initrd=/initrd-2.6.12-1.1456_FC4.img
root=/dev/VolGroup00/LogVol00
append="rhgb quiet"
And here is my grub.cfg :
address@hidden grub]# cat grub.cfg
timeout 10
title Linux
linux (hd,1)/vmlinuz-2.6.12-1.1456_FC4 root=/dev/hda1
initrd (hd,1)/initrd-2.6.12-1.1456_FC4.img
So I guess I would need to know more about the spec for the grub.cfg
file to know what it wants. There is a picture of what happens in
that list of pictures above.
http://www.blastwave.org/dclarke/grub/grub_1.91/day_01/img_1282.jpg
With yaboot I get the following :
How to boot yaboot from the Genesi ODW firmware
http://www.blastwave.org/dclarke/grub/grub_1.91/day_02/img_1287.jpg
yaboot 1.3.13 (Red Hat 1.3.13-06) has loaded its config file
http://www.blastwave.org/dclarke/grub/grub_1.91/day_02/img_1288.jpg
yaboot 1.3.13 loading the kernel ( sorry for the blur )
http://www.blastwave.org/dclarke/grub/grub_1.91/day_02/img_1289.jpg
Red Hat nash version 4.2.15
http://www.blastwave.org/dclarke/grub/grub_1.91/day_02/img_1290.jpg
Fedora Core 4 nifty graphical boot progress
http://www.blastwave.org/dclarke/grub/grub_1.91/day_02/img_1291.jpg
Fedora Core 4 login
http://www.blastwave.org/dclarke/grub/grub_1.91/day_02/img_1292.jpg
Dennis Clarke
address@hidden