[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: GRUB on OLPC / XO
Re: GRUB on OLPC / XO
Sat, 12 Jan 2008 19:58:43 +0100
On Sat, Jan 12, 2008 at 08:02:03AM -1000, Mitch Bradley wrote:
> Robert Millan wrote:
> >Some comments on things that need polishing. Some are more addressed at
> >of the two lists than the others, but feel free to join in either case.
> >(also, if you feel this is off-topic in olpc-devel, feel free to ki^W let
> >me know)
> >btw, Mitch mentioned to me on IRC that the ELF loader on XO has some
> >modifications to support Minix. Is this documented somewhere?
> I was mistaken about Minix - there are no Minix-specific hacks in the
> ELF loader. The only Minix support is a handler for the Minix
> filesystem layout, which doesn't affect the ELF loader.
> The ELF loader has two special cases, which are not documented anywhere
> except the source code (cpu/x86/pc/olpc/linux.fth : ?memtest-elf-map-in ) :
> a) It recognizes the memtest86 binary that is embedded in OFW, setting
> up some special mappings that memtest requires (or at least used to require)
> b) It recognizes the ELF form of the Linux binary and sets up a mapping
> from virtual c0xx.xxxx to physical 00xx.xxxx . Normally this isn't
> used, because we load the bzImage version of Linux. But OFW can load
> the ELF portion of the Linux kernel, without the bzImage wrapper. If
> you do it that way, OFW has access to the ELF symbol table and can thus
> resolve symbolic names for addresses inside Linux.
Ok, thanks for the explanation. It doesn't seem like GRUB would be affected
> >On Sat, Jan 12, 2008 at 02:42:30PM +0100, Robert Millan wrote:
> >>+grub_exit (void)
> >>+ /* Trap to Open Firmware. */
> >>+ /* FIXME. */
> >>+ for (;;);
> >We used to run "trap" insttruction on powerpc. I assume for exitting via
> >on i386 we need to generate an interrupt; I'm just not sure which is the
> >number for it.
> To exit to OFW, call the "exit()" client service.
I see. Is this one expected to work everywhere including Apple etc? We'd
probably be better off ditching the __asm__("trap") altogether.
> To reboot, call "boot()" with an empty string as the single IN argument.
For this we used "reset-all". The standard seems to indicate both are
equally fine; is that it?
> To power off, call "interpret()" with a cmd string of "power-off".
We used "shut-down" for this one. Unfortunately not mentioned in the
standard (not sure where it came from). Is there a portable way to do this?
> >> /* Load pre-loaded modules and free the space. */
> >> grub_register_exported_symbols ();
> >>- grub_load_modules ();
> >>+// grub_load_modules ();
> >This generates an out of bounds exception. GRUB puts modules above _end
> >(0x1000-aligned). Is access to that address allowed by OFW ?
> The ELF loader will map in anything listed in a program header of type
> PT_LOAD , according to the vaddr, memsize, and filesize fields. If the
> module area is covered by such a program header, they should be accessible.
Ah, that hints at a known bug in our ELF generator (affecting LinuxBI^W
Coreboot). I'll check if the patches for that one help.
> >> grub_ieee1275_finddevice ("/options", &options);
> >> rc = grub_ieee1275_get_property (options, "real-mode?", &realmode,
> >> sizeof realmode, 0);
> >>- if ((rc >= 0) && realmode)
> >>+// if ((rc >= 0) && realmode)
> >> grub_ieee1275_set_flag (GRUB_IEEE1275_FLAG_REAL_MODE);
> >This OFW operates in what GRUB calls "real mode" (not to be confused with
> >x86 realmode!), but /options/real-mode? doesn't exist. Should we probe
> >for the actual feature (/chosen/mmu IIRC), probe for firmware version, or
> >#ifdef it for x86 CPUs?
> This OFW operates in virtual mode, but happens to have an identity
> mapping of low memory for convenience.
/chosen/mmu is set to 0, at least on my (qemu) environment. Should clients
interpret this as identity mapping, or is this unintended?
<GPLv2> I know my rights; I want my phone call!
<DRM> What use is a phone call, if you are unable to speak?
(as seen on /.)
GRUB on OLPC / XO, Robert Millan, 2008/01/12
- Re: GRUB on OLPC / XO, (continued)