[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2] gnu: Add rust
|
From: |
ng0 |
|
Subject: |
Re: [PATCH v2] gnu: Add rust |
|
Date: |
Tue, 13 Sep 2016 19:11:49 +0000 |
This now fails differently after a good while of compiling.
llvm[1]: ***** Completed Release Build
make[1]: Leaving directory
'/tmp/guix-build-rust-1.10.0.drv-0/rustc-1.10.0/x86_64-unknown-linux-gnu/llvm'
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/libcore
compile: x86_64-unknown-linux-gnu/rustllvm/ExecutionEngineWrapper.o
compile: x86_64-unknown-linux-gnu/rustllvm/RustWrapper.o
compile: x86_64-unknown-linux-gnu/rustllvm/PassWrapper.o
compile: x86_64-unknown-linux-gnu/rustllvm/ArchiveWrapper.o
link: x86_64-unknown-linux-gnu/rt/librustllvm.a
ar: `u' modifier ignored since `D' is the default (see `U')
src/libcore/lib.rs:69:12: 69:33 warning: unused or unknown feature,
#[warn(unused_features)] on by default
src/libcore/lib.rs:69 #![feature(cfg_target_has_atomic)]
^~~~~~~~~~~~~~~~~~~~~
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/liblibc
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/librand
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_unicode
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_bitflags
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/liballoc_system
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/libunwind
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/liballoc_jemalloc
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/liballoc
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/libcollections
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/libpanic_abort
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/libpanic_unwind
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/libstd
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/libarena
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/libflate
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/libgetopts
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/libgraphviz
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/libterm
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/liblog
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/libfmt_macros
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_llvm
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_platform_intrinsics
cp: x86_64-unknown-linux-gnu/stage1/lib/libstd
rustc:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/libserialize
error: linking with `cc` failed: exit code: 1
note: "cc" "-Wl,--as-needed" "-Wl,-z,noexecstack" "-m64" "-L"
"/tmp/guix-build-rust-1.10.0.drv-0/rustc-1.10.0/x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib"
"x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/rustc_llvm-2f39a9bd.0.o"
"-o"
"x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/librustc_llvm-2f39a9bd.so"
"x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/rustc_llvm-2f39a9bd.metadata.o"
"-Wl,-O1" "-nodefaultlibs" "-L" "x86_64-unknown-linux-gnu/rt" "-L"
"/tmp/guix-build-rust-1.10.0.drv-0/rustc-1.10.0/x86_64-unknown-linux-gnu/llvm/Release/lib"
"-L"
"/tmp/guix-build-rust-1.10.0.drv-0/rustc-1.10.0/x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib"
"-Wl,-Bstatic" "-Wl,--whole-archive" "-l" "rustllvm" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMInterpreter" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMMCJIT" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMExecutionEngine" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMRuntimeDyld" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMipo" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMVectorize" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMLinker" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMIRReader" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMAsmParser" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMPowerPCDisassembler" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMPowerPCCodeGen" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMPowerPCAsmParser" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMPowerPCDesc" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMPowerPCInfo" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMPowerPCAsmPrinter" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMMipsDisassembler" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMMipsCodeGen" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMMipsAsmParser" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMMipsDesc" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMMipsInfo" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMMipsAsmPrinter" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMAArch64Disassembler" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMAArch64CodeGen" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMAArch64AsmParser" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMAArch64Desc" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMAArch64Info" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMAArch64AsmPrinter" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMAArch64Utils" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMARMDisassembler" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMARMCodeGen" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMARMAsmParser" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMARMDesc" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMARMInfo" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMARMAsmPrinter" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMX86Disassembler" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMX86AsmParser" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMX86CodeGen" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMSelectionDAG" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMAsmPrinter" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMCodeGen" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMTarget" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMScalarOpts" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMInstCombine" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMInstrumentation" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMProfileData" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMTransformUtils" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMBitWriter" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMAnalysis" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMX86Desc" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMObject" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMMCParser" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMBitReader" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMMCDisassembler" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMX86Info" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMX86AsmPrinter" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMMC" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMX86Utils" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMCore" "-Wl,--no-whole-archive"
"-Wl,--whole-archive" "-l" "LLVMSupport" "-Wl,--no-whole-archive"
"-Wl,-Bdynamic" "-l" "pthread" "-l" "dl" "-l" "m" "-l" "stdc++" "-L"
"/tmp/guix-build-rust-1.10.0.drv-0/rustc-1.10.0/x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib"
"-l" "std-2f39a9bd" "-l" "dl" "-l" "pthread" "-l" "gcc_s" "-l" "c" "-l" "m"
"-l" "rt" "-l" "util" "-shared" "-Wl,-rpath,$ORIGIN/"
"-Wl,-rpath,/usr/local/lib/rustlib/x86_64-unknown-linux-gnu/lib"
"-Wl,--enable-new-dtags" "-l" "compiler-rt"
note: ld: cannot find -lLLVMInterpreter
ld: cannot find -lLLVMMCJIT
ld: cannot find -lLLVMRuntimeDyld
ld: cannot find -lLLVMPowerPCDisassembler
ld: cannot find -lLLVMPowerPCCodeGen
ld: cannot find -lLLVMPowerPCAsmParser
ld: cannot find -lLLVMPowerPCDesc
ld: cannot find -lLLVMPowerPCInfo
ld: cannot find -lLLVMPowerPCAsmPrinter
ld: cannot find -lLLVMMipsDisassembler
ld: cannot find -lLLVMMipsCodeGen
ld: cannot find -lLLVMMipsAsmParser
ld: cannot find -lLLVMMipsDesc
ld: cannot find -lLLVMMipsInfo
ld: cannot find -lLLVMMipsAsmPrinter
ld: cannot find -lLLVMAArch64Disassembler
ld: cannot find -lLLVMAArch64CodeGen
ld: cannot find -lLLVMAArch64AsmParser
ld: cannot find -lLLVMAArch64Desc
ld: cannot find -lLLVMAArch64Info
ld: cannot find -lLLVMAArch64AsmPrinter
ld: cannot find -lLLVMAArch64Utils
ld: cannot find -lLLVMARMDisassembler
ld: cannot find -lLLVMARMCodeGen
ld: cannot find -lLLVMARMAsmParser
ld: cannot find -lLLVMARMDesc
ld: cannot find -lLLVMARMInfo
ld: cannot find -lLLVMARMAsmPrinter
ld: cannot find -lLLVMX86Disassembler
ld: cannot find -lLLVMX86AsmParser
ld: cannot find -lLLVMX86CodeGen
ld: cannot find -lLLVMSelectionDAG
ld: cannot find -lLLVMAsmPrinter
ld: cannot find -lLLVMX86Desc
ld: cannot find -lLLVMMCParser
ld: cannot find -lLLVMMCDisassembler
ld: cannot find -lLLVMX86Info
ld: cannot find -lLLVMX86AsmPrinter
ld: cannot find -lLLVMX86Utils
collect2: error: ld returned 1 exit status
error: aborting due to previous error
make: *** [/tmp/guix-build-rust-1.10.0.drv-0/rustc-1.10.0/mk/target.mk:216:
x86_64-unknown-linux-gnu/stage0/lib/rustlib/x86_64-unknown-linux-gnu/lib/stamp.rustc_llvm]
Error 101
make: *** Waiting for unfinished jobs....
phase `build' failed after 672.4 seconds
builder for `/gnu/store/c8acq3klhxjf50sb31wfbsg48v6rg2kj-rust-1.10.0.drv'
failed with exit code 1
@ build-failed /gnu/store/c8acq3klhxjf50sb31wfbsg48v6rg2kj-rust-1.10.0.drv - 1
builder for `/gnu/store/c8acq3klhxjf50sb31wfbsg48v6rg2kj-rust-1.10.0.drv'
failed with exit code 1
guix build: error: build failed: build of
`/gnu/store/c8acq3klhxjf50sb31wfbsg48v6rg2kj-rust-1.10.0.drv' failed
Cannot open display "default display"
derivation '/gnu/store/c8acq3klhxjf50sb31wfbsg48v6rg2kj-rust-1.10.0.drv'
offloaded to '192.168.1.198' failed with exit code 1
@ build-failed /gnu/store/c8acq3klhxjf50sb31wfbsg48v6rg2kj-rust-1.10.0.drv - 1
builder for `/gnu/store/c8acq3klhxjf50sb31wfbsg48v6rg2kj-rust-1.10.0.drv'
failed with exit code 100
guix build: error: build failed: build of
`/gnu/store/c8acq3klhxjf50sb31wfbsg48v6rg2kj-rust-1.10.0.drv' failed
ng0 <address@hidden> writes:
> Disregard this, works now.
>
> ng0 <address@hidden> writes:
>
>> Eric Le Bihan <address@hidden> writes:
>>
>>> Hi!
>>>
>>> Le Tue, 13 Sep 2016 12:09:42 +0000,
>>> ng0 <address@hidden> a écrit :
>>>
>>>> I can not apply this patch with git am. Can you resend the patch as an
>>>> appended file created with git format-patch or something similar, and
>>>> not inlined?
>>>
>>> That's surprising: the patch was generated by `git format-patch` and
>>> sent via `git send-email`. My mail client is Claws Mail and it allows
>>> me to save the email I previously sent to a file in mbox format, which
>>> applies without problem with `git am`.
>>>
>>> Anyway, please find it re-attached to this mail.
>>
>> Thanks, worked this time.
>>
>>> Best regards,
>>
>>
>> I get this output, same like I had with what jelle ended up with my
>> base, produced an equal first error at some point.
>>
>> Okay, i just realized there was a mistake in the patch i applied, I need
>> to check it again, but I've got this before.. I don't know what's wrong
>> here.
>>
>> substitute: updating list of substitutes from
>> 'https://mirror.hydra.gnu.org'... 100.0%
>> substitute: updating list of substitutes from
>> 'https://mirror.hydra.gnu.org'... 100.0%
>> process 16829 acquired build slot '/var/guix/offload/192.168.1.198/0'
>> Cannot open display "default display"
>> load on machine '192.168.1.198' is 0.0 (normalized: 0.0)
>> @ build-started
>> /gnu/store/qaf7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv
>> - x86_64-linux
>> /var/log/guix/drvs/qa//f7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv.bz2
>> Cannot open display "default display"
>> Cannot open display "default display"
>> sending 2 store files to '192.168.1.198'...
>> Cannot open display "default display"
>> exporting path
>> `/gnu/store/hpj2m538l2anjb6bwksxgbivjxz5gnzj-rust-stage0-2016-02-17-4d3eebf-linux-x86_64-d29b7607d13d64078b6324aec82926fb493f59ba.tar.bz2.drv'
>> exporting path
>> `/gnu/store/qaf7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv'
>> offloading
>> '/gnu/store/qaf7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv'
>> to '192.168.1.198'...
>> @ build-remote
>> /gnu/store/qaf7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv
>> 192.168.1.198
>> Cannot open display "default display"
>> substitute: updating list of substitutes from
>> 'https://mirror.hydra.gnu.org'... 100.0%
>> The following derivation will be built:
>>
>> /gnu/store/qaf7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv
>> @ build-started
>> /gnu/store/qaf7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv
>> - x86_64-linux
>> /var/log/guix/drvs/qa//f7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv.bz2
>> Backtrace:
>> In ice-9/boot-9.scm:
>> 157: 11 [catch #t #<catch-closure 8c9560> ...]
>> In unknown file:
>> ?: 10 [apply-smob/1 #<catch-closure 8c9560>]
>> In ice-9/boot-9.scm:
>> 63: 9 [call-with-prompt prompt0 ...]
>> In ice-9/eval.scm:
>> 432: 8 [eval # #]
>> In ice-9/boot-9.scm:
>> 2401: 7 [save-module-excursion #<procedure 8e7880 at ice-9/boot-9.scm:4045:3
>> ()>]
>> 4050: 6 [#<procedure 8e7880 at ice-9/boot-9.scm:4045:3 ()>]
>> 1724: 5 [%start-stack load-stack #<procedure 8fa7c0 at
>> ice-9/boot-9.scm:4041:10 ()>]
>> 1729: 4 [#<procedure 8fdc60 ()>]
>> In unknown file:
>> ?: 3 [primitive-load
>> "/gnu/store/x5fjjgvzbrcibsv2zwqvsay5zc4916xx-rust-stage0-2016-02-17-4d3eebf-guile-builder"]
>> In ice-9/eval.scm:
>> 387: 2 [eval # ()]
>> 411: 1 [eval # ()]
>> In unknown file:
>> ?: 0 [string-append #f "/lib/ld-linux-x86-64.so.2"]
>>
>> ERROR: In procedure string-append:
>> ERROR: In procedure string-append: Wrong type (expecting string): #f
>> builder for
>> `/gnu/store/qaf7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv'
>> failed with exit code 1
>> @ build-failed
>> /gnu/store/qaf7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv
>> - 1 builder for
>> `/gnu/store/qaf7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv'
>> failed with exit code 1
>> guix build: error: build failed: build of
>> `/gnu/store/qaf7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv'
>> failed
>> Cannot open display "default display"
>> derivation
>> '/gnu/store/qaf7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv'
>> offloaded to '192.168.1.198' failed with exit code 1
>> @ build-failed
>> /gnu/store/qaf7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv
>> - 1 builder for
>> `/gnu/store/qaf7fvpw6z8h6ck5ia9ignik8r6bsm0d-rust-stage0-2016-02-17-4d3eebf.drv'
>> failed with exit code 100
>> cannot build derivation
>> `/gnu/store/0jplgx6n7a8qc93h36cjwr0bxxcksrah-rust-1.8.0.drv': 1 dependencies
>> couldn't be built
>> guix build: error: build failed: build of
>> `/gnu/store/0jplgx6n7a8qc93h36cjwr0bxxcksrah-rust-1.8.0.drv' failed
>>
>>
>>
>>> --
>>> ELB
>>> From 4f52b3f041e040d93a0a2f178d3b4a6e8f49df9f Mon Sep 17 00:00:00 2001
>>> From: Eric Le Bihan <address@hidden>
>>> Date: Thu, 28 Jul 2016 20:09:01 +0200
>>> Subject: [PATCH v2] gnu: Add rust
>>>
>>> * gnu/packages/rust.scm(rust): New variable.
>>>
>>> Signed-off-by: Eric Le Bihan <address@hidden>
>>> ---
>>> gnu/packages/rust.scm | 143
>>> ++++++++++++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 143 insertions(+)
>>> create mode 100644 gnu/packages/rust.scm
>>>
>>> diff --git a/gnu/packages/rust.scm b/gnu/packages/rust.scm
>>> new file mode 100644
>>> index 0000000..7f2edb8
>>> --- /dev/null
>>> +++ b/gnu/packages/rust.scm
>>> @@ -0,0 +1,143 @@
>>> +;;; GNU Guix --- Functional package management for GNU
>>> +;;; Copyright © 2016 Eric Le Bihan <address@hidden>
>>> +;;;
>>> +;;; This file is part of GNU Guix.
>>> +;;;
>>> +;;; GNU Guix is free software; you can redistribute it and/or modify it
>>> +;;; under the terms of the GNU General Public License as published by
>>> +;;; the Free Software Foundation; either version 3 of the License, or (at
>>> +;;; your option) any later version.
>>> +;;;
>>> +;;; GNU Guix is distributed in the hope that it will be useful, but
>>> +;;; WITHOUT ANY WARRANTY; without even the implied warranty of
>>> +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> +;;; GNU General Public License for more details.
>>> +;;;
>>> +;;; You should have received a copy of the GNU General Public License
>>> +;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>.
>>> +
>>> +(define-module (gnu packages rust)
>>> + #:use-module (ice-9 regex)
>>> + #:use-module ((guix licenses) #:select (asl2.0 x11-style))
>>> + #:use-module (guix packages)
>>> + #:use-module (guix download)
>>> + #:use-module (guix build-system gnu)
>>> + #:use-module (gnu packages base)
>>> + #:use-module (gnu packages bootstrap)
>>> + #:use-module (gnu packages curl)
>>> + #:use-module (gnu packages elf)
>>> + #:use-module (gnu packages gcc)
>>> + #:use-module (gnu packages jemalloc)
>>> + #:use-module (gnu packages perl)
>>> + #:use-module (gnu packages python))
>>> +
>>> +(define rust-bootstrap-x86_64-1.9.0
>>> + (origin
>>> + (method url-fetch)
>>> + (uri
>>> +
>>> "https://static.rust-lang.org/dist/2016-05-24/rustc-1.9.0-x86_64-unknown-linux-gnu.tar.gz";)
>>> + (sha256
>>> + (base32
>>> + "1i44rlvvn3pr81sli6bdbkzd78ar1ibybxx6mzpw6rkw4c84sw6h"))))
>>> +
>>> +(define rust-bootstrap-i686-1.9.0
>>> + (origin
>>> + (method url-fetch)
>>> + (uri
>>> +
>>> "https://static.rust-lang.org/dist/2016-05-24/rustc-1.9.0-i686-unknown-linux-gnu.tar.gz";)
>>> + (sha256
>>> + (base32
>>> + "0fdf5xvh3g4hdza0y80w1r9vnfczjqnbzbvs7k878yc26p4dwl99"))))
>>> +
>>> +(define-public rust
>>> + (package
>>> + (name "rust")
>>> + (version "1.10.0")
>>> + (source (origin
>>> + (method url-fetch)
>>> + (uri (string-append "https://static.rust-lang.org/dist/rustc-";
>>> + version "-src.tar.gz"))
>>> + (sha256
>>> + (base32
>>> + "0sb82xb8y2pzs8l1hk91z228bambwx3dmi2kj8isin7nyjn5l0d4"))))
>>> + (build-system gnu-build-system)
>>> + (native-inputs
>>> + `(("curl" ,curl)
>>> + ("gcc" ,gcc)
>>> + ("gcc-lib" ,gcc "lib")
>>> + ("jemalloc" ,jemalloc)
>>> + ("patchelf" ,patchelf)
>>> + ("perl" ,perl)
>>> + ("python" ,python-2)
>>> + ("rust-bootstrap"
>>> + ,(if (string-match "x86_64"
>>> + (or (%current-target-system) (%current-system)))
>>> + rust-bootstrap-x86_64-1.9.0
>>> + rust-bootstrap-i686-1.9.0))
>>> + ("which" ,which)))
>>> + (arguments
>>> + `(#:phases
>>> + (modify-phases %standard-phases
>>> + (add-after 'unpack 'unpack-bootstrap
>>> + (lambda* (#:key inputs #:allow-other-keys)
>>> + (with-directory-excursion (getcwd)
>>> + (zero? (system*
>>> + "tar"
>>> + "--strip-components=1"
>>> + "-xzf"
>>> + (assoc-ref inputs "rust-bootstrap"))))))
>>> + (replace 'configure
>>> + (lambda* (#:key inputs outputs #:allow-other-keys)
>>> + (let ((out (assoc-ref outputs "out"))
>>> + (binutils (assoc-ref inputs "binutils"))
>>> + (gcc (assoc-ref inputs "gcc"))
>>> + (gcc-lib (assoc-ref inputs "gcc-lib"))
>>> + (jemalloc (assoc-ref inputs "jemalloc"))
>>> + (ld-so (string-append
>>> + (assoc-ref inputs "libc")
>>> + ,(glibc-dynamic-linker)))
>>> + (python (assoc-ref inputs "python")))
>>> + (setenv "SHELL" (which "sh"))
>>> + (setenv "CONFIG_SHELL" (which "sh"))
>>> + ;; Tell where to find libgcc_s.so
>>> + (setenv "LD_LIBRARY_PATH" (string-append gcc-lib
>>> "/lib"))
>>> + ;; Remove reference to "/lib64/ld-linux-x86-64.so.2"
>>> from binary
>>> + (zero? (system*
>>> + "patchelf"
>>> + "--set-interpreter" ld-so
>>> + "rustc/bin/rustc"))
>>> + (zero? (system*
>>> + "./configure"
>>> + (string-append "--prefix=" out)
>>> + (string-append "--default-linker=" gcc
>>> "/bin/gcc")
>>> + (string-append "--default-ar=" binutils
>>> "/bin/ar")
>>> + (string-append "--jemalloc-root=" jemalloc
>>> "/lib")
>>> + (string-append "--enable-rpath")
>>> + (string-append "--enable-local-rust")
>>> + (string-append "--local-rust-root=" (getcwd)
>>> "/rustc")
>>> + (string-append "--python=" python
>>> "/bin/python2")
>>> + "--disable-manage-submodules")))))
>>> + (add-before 'build 'create-linker-wrapper
>>> + (lambda _
>>> + (let* ((bindir (string-append (getcwd) "/bin"))
>>> + (cc (string-append bindir "/cc")))
>>> + (mkdir bindir)
>>> + (call-with-output-file cc
>>> + (lambda (port)
>>> + (format port
>>> + "#!~a\n\nexec gcc \"address@hidden"\n"
>>> (which "sh"))))
>>> + (chmod cc #o755))))
>>> + (add-before 'build 'change-PATH
>>> + (lambda _
>>> + (setenv "PATH"
>>> + (string-append (getcwd)
>>> + "/bin:"
>>> + (getenv "PATH"))))))
>>> + ;; Disable tests which can only be run from Git repository
>>> + #:tests? #f))
>>> + (synopsis "Compiler for the Rust progamming language")
>>> + (description
>>> + "Rust is a systems programming language that runs blazingly fast,
>>> prevents
>>> +segfaults, and guarantees thread safety.")
>>> + (home-page "https://www.rust-lang.org";)
>>> + (license (list asl2.0 (x11-style "file://LICENSE-MIT")))))
>>> --
>>> 2.4.11
>>>
>>
>> --
>> ng0
>>
>>
>
> --
> ng0
>
>
--
ng0