help-cfengine
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Problems compiling 2.0a15 on IRIX 6.5.13


From: Bas van der Vlies
Subject: Re: Problems compiling 2.0a15 on IRIX 6.5.13
Date: Thu, 06 Dec 2001 17:25:11 +0100 (MET)

Rune,

 export LD_LIBRARYN32_PATH=$LD_LIBRARYN32_PATH:/usr/freeware/lib32
 ./cfagent -n -p -v

 This is the solution not the one you provide, put it /etc/profile
 and other line in /etc/cshrc and most programs will run.

                Regards

On 06-Dec-2001 Rune Mossige wrote:
> Thanks for the help.
> 
> I downloaded the file, and tried to run it:
> 
> ./cfagent -v
> 37301:./cfagent: rld: Fatal Error: Cannot Successfully map soname
> 'libdb-3.3.so' under any of the filenames
> /usr/lib32/libdb-3.3.so:/usr/lib32/internal/libdb-3.3.so:/lib32/libdb-3.3.so:/
> opt/lib32/libdb-3.3.so: 
> 
> 
> I then created symlinks into /usr/lib pointint to where I installed
> the DB3 (/usr/freeware/lib32), and then it ran OK. I will give it a go,
> and see how it go.
> 
> Again, thanks for the help.
> 
> On (06/12/01 14:21), Bas van der Vlies wrote:
>> X-Mailer: XFMail 1.4.4 on Solaris
>> X-Priority: 3 (Normal)
>> Content-Transfer-Encoding: 8bit
>> Date: Thu, 06 Dec 2001 14:21:01 +0100 (MET)
>> Reply-To: address@hidden
>> Organization: SARA
>> Sender: address@hidden
>> From: Bas van der Vlies <address@hidden>
>> To: Rune Mossige <address@hidden>
>> Subject: RE: Problems compiling 2.0a15 on IRIX 6.5.13
>> Cc: address@hidden
>> 
>> Rune,
>>  
>>  I have just compiled this version with gcc 2.95 no problems, but 
>>  gethostbyname still goes wrong. I have also compiled it with
>>  the native SGI compiler and also no problem. You can fetch it
>>  from:
>>    ftp.sara.nl://pub/SARA/outgoing/cfengine-irix-2.0a15.tar.gz
>> 
>>  NO Warranties and it is compiled on 6.5.13!!
>> 
>>                 Regards
>> 
>> On 06-Dec-2001 Rune Mossige wrote:
>> > Hello,
>> > I have soem O2's and Octanes running IRIX 6.5.13, and I would like
>> > to compile cfengine-2.0a15 on those machines.
>> > 
>> > I have installed gcc 3.0 on them.
>> > 
>> > In the past (cfengine 1.6.3) I know that gcc did not work on IRIX,
>> > because gethostbyname (I think) returned the wrong thing (I think
>> > it was localhost). Is this fixed in gcc3?
>> > 
>> > Anyway, when I try to compile on an O2, I get:
>> > 
>> > 
>> > GSTESW 14# make
>> > Making all in pub
>> >         source='getopt.c' object='getopt.o' libtool=no \
>> >         depfile='.deps/getopt.Po' tmpdepfile='.deps/getopt.TPo' \
>> >         depmode=gcc3 /bin/sh ../depcomp \
>> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
>> > getopt.c || echo './'`getopt.c
>> >         source='getopt1.c' object='getopt1.o' libtool=no \
>> >         depfile='.deps/getopt1.Po' tmpdepfile='.deps/getopt1.TPo' \
>> >         depmode=gcc3 /bin/sh ../depcomp \
>> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
>> > getopt1.c || echo './'`getopt1.c
>> >         source='full-write.c' object='full-write.o' libtool=no \
>> >         depfile='.deps/full-write.Po' tmpdepfile='.deps/full-write.TPo' \
>> >         depmode=gcc3 /bin/sh ../depcomp \
>> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
>> > full-write.c || echo './'`full-write.c
>> >         source='regex.c' object='regex.o' libtool=no \
>> >         depfile='.deps/regex.Po' tmpdepfile='.deps/regex.TPo' \
>> >         depmode=gcc3 /bin/sh ../depcomp \
>> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
>> > regex.c || echo './'`regex.c
>> >         source='md5.c' object='md5.o' libtool=no \
>> >         depfile='.deps/md5.Po' tmpdepfile='.deps/md5.TPo' \
>> >         depmode=gcc3 /bin/sh ../depcomp \
>> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
>> >         md5.c
>> >|| echo './'`md5.c
>> >         source='md5c.c' object='md5c.o' libtool=no \
>> >         depfile='.deps/md5c.Po' tmpdepfile='.deps/md5c.TPo' \
>> >         depmode=gcc3 /bin/sh ../depcomp \
>> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
>> > md5c.c || echo './'`md5c.c
>> >         source='snprintf.c' object='snprintf.o' libtool=no \
>> >         depfile='.deps/snprintf.Po' tmpdepfile='.deps/snprintf.TPo' \
>> >         depmode=gcc3 /bin/sh ../depcomp \
>> >         gcc -DHAVE_CONFIG_H -I. -I. -I../src      -g -O2 -w -c `test -f
>> > snprintf.c || echo './'`snprintf.c
>> > snprintf.c: In function `vsnprintf':
>> > snprintf.c:622: parse error before "int"
>> > snprintf.c:622: parse error before "int"
>> > snprintf.c:622: parse error before "int"
>> > snprintf.c:622: parse error before "int"
>> > snprintf.c:622: parse error before "int"
>> > snprintf.c:622: parse error before ')' token
>> > snprintf.c:636: parse error before "int"
>> > snprintf.c:636: parse error before "int"
>> > snprintf.c:636: parse error before "int"
>> > snprintf.c:636: parse error before "int"
>> > snprintf.c:636: parse error before "int"
>> > snprintf.c:636: parse error before ')' token
>> > snprintf.c:694: parse error before "int"
>> > snprintf.c:694: parse error before "int"
>> > snprintf.c:694: parse error before "int"
>> > snprintf.c:694: parse error before "int"
>> > snprintf.c:694: parse error before "int"
>> > snprintf.c:694: parse error before ')' token
>> > snprintf.c:700: parse error before "const"
>> > snprintf.c:700: parse error before "const"
>> > snprintf.c:700: parse error before "const"
>> > snprintf.c:700: parse error before "const"
>> > snprintf.c:700: parse error before "const"
>> > snprintf.c:700: parse error before ')' token
>> > snprintf.c:759: parse error before "void"
>> > snprintf.c:759: parse error before "void"
>> > snprintf.c:759: parse error before "void"
>> > snprintf.c:759: parse error before "void"
>> > snprintf.c:759: parse error before "void"
>> > snprintf.c:759: parse error before ')' token
>> > snprintf.c:770: parse error before "int"
>> > snprintf.c:770: parse error before "int"
>> > snprintf.c:770: parse error before "int"
>> > snprintf.c:770: parse error before "int"
>> > snprintf.c:770: parse error before "int"
>> > snprintf.c:770: parse error before ')' token
>> > snprintf.c:775: parse error before "long"
>> > snprintf.c:775: parse error before "long"
>> > snprintf.c:775: parse error before "long"
>> > snprintf.c:775: parse error before "long"
>> > snprintf.c:775: parse error before "long"
>> > snprintf.c:775: parse error before ')' token
>> > snprintf.c:791: parse error before "unsigned"
>> > snprintf.c:791: parse error before "unsigned"
>> > snprintf.c:791: parse error before "unsigned"
>> > snprintf.c:791: parse error before "unsigned"
>> > snprintf.c:791: parse error before "unsigned"
>> > snprintf.c:791: parse error before ')' token
>> > snprintf.c:795: parse error before "unsigned"
>> > snprintf.c:795: parse error before "unsigned"
>> > snprintf.c:795: parse error before "unsigned"
>> > snprintf.c:795: parse error before "unsigned"
>> > snprintf.c:795: parse error before "unsigned"
>> > snprintf.c:795: parse error before ')' token
>> > *** Error code 1 (bu21)
>> > *** Error code 1 (bu21)
>> > GSTESW 15# 
>> > 
>> > 
>> > Is there anyone who knows how to fix this, or alternatively,
>> > have a pre-compiled cfengine-2.0a15 binary distribution for
>> > IRIX 6.5.13? I do not have the SGI compiler, so I am a bit lost...
>> > -- 
>> > -------------------------------------------------------------------
>> >            (-: Hiroshima 45, Chernobyl 86, Windows 95 :-)
>> > Our ultimate goal is to make overloaded systems appear to be idle.
>> > High performance, High reliability, Low cost -------- Pick any two.
>> > -------------------------------------------------------------------
>> > Rune  Mossige,  Systems  Support  Engineer,  WesternGeco, Stavanger
>> > Tel: (+47)51946869                             Mobile:(+47)90871024
>> > 
>> > _______________________________________________
>> > Help-cfengine mailing list
>> > address@hidden
>> > http://mail.gnu.org/mailman/listinfo/help-cfengine
>> 
>> --
>> ********************************************************************
>> *                                                                  *
>> *  Bas van der Vlies                     e-mail: address@hidden      *
>> *  SARA - Academic Computing Services    phone:  +31 20 592 8012   *
>> *  Kruislaan 415                         fax:    +31 20 6683167    *
>> *  1098 SJ Amsterdam                     WWW:    www.sara.nl       *
>> *                                                                  *
>> ********************************************************************
>> 
> 
> -- 
> -------------------------------------------------------------------
>            (-: Hiroshima 45, Chernobyl 86, Windows 95 :-)
> Our ultimate goal is to make overloaded systems appear to be idle.
> High performance, High reliability, Low cost -------- Pick any two.
> -------------------------------------------------------------------
> Rune  Mossige,  Systems  Support  Engineer,  WesternGeco, Stavanger
> Tel: (+47)51946869                             Mobile:(+47)90871024
> 
> _______________________________________________
> Help-cfengine mailing list
> address@hidden
> http://mail.gnu.org/mailman/listinfo/help-cfengine

--
********************************************************************
*                                                                  *
*  Bas van der Vlies                     e-mail: address@hidden      *
*  SARA - Academic Computing Services    phone:  +31 20 592 8012   *
*  Kruislaan 415                         fax:    +31 20 6683167    *
*  1098 SJ Amsterdam                     WWW:    www.sara.nl       *
*                                                                  *
********************************************************************



reply via email to

[Prev in Thread] Current Thread [Next in Thread]