[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Help-gnu-radius] acct-terminate-cause is always 0
From: |
Randy Smith |
Subject: |
[Help-gnu-radius] acct-terminate-cause is always 0 |
Date: |
Thu, 28 Feb 2002 11:05:20 -0800 |
I'm setting up gnu-radius with postgres to to do accounting. Everything
appears ok excecpt the acct-terminate-cause is always 0 (zero). Input and
output values appear ok along with the other values. Just
acct-terminate-cause appears broken.
This is from my detail file:
Thu Feb 28 21:41:24 2002
User-Name = <snip>
NAS-IP-Address = <snip>
NAS-Port-Id = 20411
NAS-Port-Type = Async
Acct-Status-Type = Stop
Acct-Delay-Time = 0
Acct-Session-Id = 379743176
Acct-Authentic = RADIUS
Acct-Session-Time = 565
Acct-Input-Octets = 89121
Acct-Output-Octets = 457405
Acct-Input-Packets = 2309
Acct-Output-Packets = 1170
Framed-Protocol = PPP
Framed-IP-Address = <snip>
Timestamp = 1014961284
Request-Authenticator = Verified
Using Redhat 7.2, postgres 7.2, gnu-radius 0.96. NAS boxes are all
Ascend/Lucent 2000/4000/6000 chassis. When logging accounting to DTC Radius
I get my standard cause codes. Radius is still being handled by DTC Radius.
Do I need to do something special to get acct-terminate-cause?
Randy Smith
Tiger Mountain Technologies
- [Help-gnu-radius] acct-terminate-cause is always 0,
Randy Smith <=