[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Help-gnu-radius] Re: Send IP address

From: Sergey Poznyakoff
Subject: Re: [Help-gnu-radius] Re: Send IP address
Date: Wed, 18 Jun 2003 16:06:29 +0300

> Excuse-me Sergey,
>       I donĀ“t understand your reply ??

Please refer to:

In short this boils down to the following:

1) Adding a '+' after a Framed-IP-Address value instructs Radius to add the
value of NAS-Port-Id (whatever it is) to this IP and return the

2) In your configuration, you have Framed-IP-Address =
and you say Radius returns IP This means that the
value of NAS-Port-Id in the incoming request was 1021.

3) Needless to say, such high port numbers are useless as a means of
allocating IP addresses. Therefore, you should either reconfigure
your NAS so that it reports "real" port numbers (refer to your NAS
documentation for more info), or use some Rewrite procedure on Radius
side to achieve the same effect.

You may find more info about Rewrite language at

An example of a port rewriting function may be found at


reply via email to

[Prev in Thread] Current Thread [Next in Thread]