[Help-gnu-radius] About NAS-IP-Address

[sy sy]

It is strange !
I send a request to radius  by radsession like this
radsession -l guest -p guest -n 192.168.70.3 -s "0001" -P 1 start
 
The record in detail file as following:
 Jun 15 10:51:20 2004
        NAS-IP-Address = 192.168.70.3
        User-Name = cisco
        Acct-Status-Type = Start
        Acct-Session-Id = 0001
        NAS-Port-Id = 1
        Service-Type = Outbound-User
        Cisco-AVPair = auth-proxy:priv-lvl=15
        Cisco-AVPair = auth-proxy:proxyacl#1=permit tcp any any eq 80
        NAS-IP-Address = 3.70.168.192
        Timestamp = 1087267880
        Request-Authenticator = Verified
 
Have you notice that NAS-IP-Address (3.70.168.192) below  is not same as  one 
(192.168.70.3) above.
So when I send accouting stop request to radius,it  does not work!
In radius.log  warning message is found as 
TueJun 15 10:51:20 Acct.warning: stat_update(): portno 1: can't find nas for IP 
3.7
0.168.192
 
And function defined in huntgroups also does not work.
DEFAULT NAS-IP-Address = 3.70.168.192,
        Rewrite-Function = "test"
        NULL

 

                
---------------------------------
Do you Yahoo!?
Friends.  Fun. Try the all-new Yahoo! Messenger