[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Vortex NIC problem
From: |
Ciro Cavani |
Subject: |
Re: Vortex NIC problem |
Date: |
04 Mar 2003 17:54:00 -0300 |
Em Ter, 2003-03-04 às 12:37, grant@seinfeld.arrowstreet.com escreveu:
> You might have a irq problem which could be solved using the 3com firmware
> utilities to modify the cards IRQ,IO address, etc. Or pull any devices your
> not going to use.
At first I think that could be irq ploblem, then I define the IRQ of NIC
PCI slot on BIOS:
CPU0
0: 39941 XT-PIC timer
1: 1300 XT-PIC keyboard
2: 0 XT-PIC cascade
**5: 7913 XT-PIC eth0
7: 11 XT-PIC parport0
9: 0 XT-PIC acpi
10: 3723 XT-PIC EMU10K1
11: 20859 XT-PIC nvidia
12: 7928 XT-PIC PS/2 Mouse
14: 11365 XT-PIC ide0
15: 49 XT-PIC ide1
NMI: 0
LOC: 39903
ERR: 1
MIS: 0
this is kernel output (thanks by the tip):
On GNU Mach
GNUmach 1.2
AT386 boot: physical memory from 0x0 to 0x1ffec000
GNUmach 1.2
AT386 boot: physical memory from 0x0 to 0x1ffec000
pcibios_init : BIOS32 Service Directory structure at 0x000f1430
pcibios_init : BIOS32 Service Directory entry at 0xf0bc0
pcibios_init : PCI BIOS revision 2.10 entry at 0xf0dc0
Probing PCI hardware.
hd0: QUANTUM FIREBALLP AS40.0, 38172MB w/1902kB Cache, CHS=4866/255/63
hd2: LG DVD-ROM DRD-8160B, ATAPI CDROM drive
hd3: LG CD-RW CED-8120B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Failed initialization of WD-7000 SCSI card!
EATA0: address 0x1f0 in use, skipping probe.
EATA0: address 0x170 in use, skipping probe.
ppa: Version 1.42
ppa: Probing port 03bc
ppa: Probing port 0378
ppa: SPP port present
ppa: ECP with a 16 byte FIFO present
ppa: PS/2 bidirectional port present
ppa: Failed Intel bug check. (Phony EPP in ECP)
ppa: Probing port 0278
scsi : 0 hosts.
scsi : detected total.
3c59x.c:v0.99L 5/28/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c905C Tornado at 0xa000, 00:01:03:ce:40:17, IRQ 5
8K byte-wide RAM 5:3 Rx:Tx split, 10baseT interface.
Enabling bus-master transmits and whole-frame receives.
0 3c515 cards found.
eth1: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
...
And on OSKit-Mach:
<7>Probing hpplus
<7>Probing ac3200
<7>Probing ne
<7>Probing e2100
<7>Probing at1700
<7>Probing fmv18x
<7>Probing eth16i
<7>Probing etherlink3
<7>Probing znet
<7>Probing eexpress
<7>Probing eepro
<7>Probing ewrk3
<7>Probing de4x5
<7>Probing etherlink
<7>Probing etherlink16
<7>Probing etherlinkplus
<7>Probing sk_g16
<7>Probing ni52
<7>Probing ni65
<7>Probing lance
<7>Probing vortex
<7>Probing epic100
...
And the real output from ping:
PING 161.24.72.1 (161.24.72.1): 56 data bytes
64 bytes from 161.24.73.87: Destination Host Unreachable
Vr HL TOS Len ID Flg off TTL Pro cks Src Dst Data
4 5 c0 8400 0200 0 0000 ff 01 d7e5 161.24.73.87 161.24.73.87
64 bytes from 161.24.73.87: Destination Host Unreachable
Vr HL TOS Len ID Flg off TTL Pro cks Src Dst Data
4 5 c0 8400 0300 0 0000 ff 01 d6e5 161.24.73.87 161.24.73.87
--- 161.24.72.1 ping statistics ---
3 packets transmitted, 0 packets received, 100% packet loss
I use 3COM Diagnostc for Windows to configure the NIC to half-duplex
(instead of auto-detect), normal (instead of nmin CPU usage) and 10baseT
(instead of auto)... but no effect!!!
> Thanks
> MattG
Thank you!
--
Ciro Cavani <cavani@h8.ita.br>
Instituto Tecnológico de Aeronáutica