[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Plotting

From: John B. Thoo
Subject: Re: Plotting
Date: Wed, 10 Jan 2007 21:24:47 -0800

On Jan 7, 2007, at 10:37 AM, Matthias Brennwald wrote:

On 07.01.2007, at 19:07, address@hidden wrote:

Message: 6
Date: Sun, 07 Jan 2007 19:40:27 -0500
From: Michael Gregory <address@hidden>
Subject: Plotting
To: address@hidden
Message-ID: <address@hidden>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

        I just went through the install of Octave, Aquaterm and then
Gnuplot. I am having a problem.

octave:1> tt = 0:.1: 2;
octave:3> x = exp(j*2*pi*tt);

octave:5> plot (x)
dyld: Library not loaded: /usr/local/lib/libaquaterm.1.0.0.dylib
   Referenced from: /usr/local/bin/gnuplot
   Reason: image not found
warning: connection to external plotter (pid = 361) lost --
warning: broken pipe -- some output may be lost
dyld: Library not loaded: /usr/local/lib/libaquaterm.1.0.0.dylib
   Referenced from: /usr/local/bin/gnuplot
   Reason: image not found

  Can/will you help me?

See here:


Hi, Mike. I had the same problem. I'm guessing that you installed Gnuplot from a .dmg (e.g., obtained from versiontracker). I did the same and found that the tip given in the the link Matthias provided above worked. However, I also found that I could avoid using that tip by installing Gnuplot 4.0 from source (upon Joe Koski's suggestion).


Then there was no "library not loaded" error referencing libaquaterm. 1.0.0.dylib.

BTW, to install Gnuplot from source, I found that I had to type the following.

    make CC=gcc-3.3
    sudo make install

I don't know if this was indeed necessary, but that was my experience.

Good luck.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]