[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Some failed tests in Octave 3.3.53 [more details]
From: |
Jordi Gutiérrez Hermoso |
Subject: |
Re: Some failed tests in Octave 3.3.53 [more details] |
Date: |
Fri, 5 Nov 2010 07:09:54 -0600 |
2010/11/4 José Luis García Pallero <address@hidden>:
> 2. Test failed in chol.cc (FAIL 1). This error appears in all
> versions: 3.3.51, 3.3.53 and current hg source code. The log file
> says:
>
> !!!!! test failed
> assert (norm (R1 - R, Inf) < 1e1 * eps) failed
> shared variables {
> A =
>
> 0.436997 -0.131721 0.124120 -0.061673
> -0.131721 0.738529 0.019851 -0.140295
> 0.124120 0.019851 0.354879 -0.059472
> -0.061673 -0.140295 -0.059472 0.600939
>
> u =
>
> 0.98950
> 0.39844
> 0.63484
> 0.13351
>
> Ac =
>
> Columns 1 through 3:
>
> 0.55855 + 0.00000i -0.16621 - 0.03153i 0.01079 + 0.02364i
> -0.16621 + 0.03153i 0.67601 + 0.00000i 0.00115 - 0.04755i
> 0.01079 - 0.02364i 0.00115 + 0.04755i 0.62631 + 0.00000i
> -0.02768 + 0.01861i 0.01460 - 0.02476i -0.15858 + 0.07198i
>
> Column 4:
>
> -0.02768 - 0.01861i
> 0.01460 + 0.02476i
> -0.15858 - 0.07198i
> 0.60342 + 0.00000i
>
> uc =
>
> 0.54267 + 0.91519i
> 0.99647 + 0.43141i
> 0.83760 + 0.68977i
> 0.39160 + 0.90378i
>
> If I do test chol the results are the same than for make check
What BLAS are you using? Most of those computations are handled by
BLAS, so you could have found a bug in its implementation. My guess is
you're probably using ATLAS. Can you please check?