[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Linphone-users] linphonec: making gsm the preferred codec?
From: |
Simon Morlat |
Subject: |
Re: [Linphone-users] linphonec: making gsm the preferred codec? |
Date: |
Mon, 7 Feb 2005 11:40:42 +0100 |
User-agent: |
KMail/1.7.1 |
Your config file is ok.
just change con_type=4 (the default value on 1.0.0preX but as you were
upgrading from 0.12.2 it was not changed).
This fields describes your internet connection type:
0: 28k analog modem
1: 56k analog modem
2: ISDN link
3: ADSL
4: ethernet or more.
Those things are not friendly-handled by linphonec, it is planned to do so so
that anybody should have to even look at this config file.
Simon
Le Vendredi 4 Février 2005 21:54, Mikhail Ramendik a écrit :
> Hello,
>
> Looks like liphonec does connect to my proxy, if I give its adderss
> explicitly with the phone number. It takes the password from
> ~/.gnome2/linphone , which was created by linphone 0.12.2 .
>
> However, judging by the traffic, it's using pcma or pcmu as the codec. I
> know that the other side supports GSM; in fact I've tried deleting all
> codecs except GSM from the config file, and before I deleted them, they had
> "enabled=0". Still I can't make it connect with GSM!
>
> What can I do to make linphonec use gsm as the preferred codec, or better
> yet, as the only available codec?
>
> Here's the entire config file, with the password altered of course:
>
> [net]
> con_type=2
> use_nat=0
>
> [sip]
> username=rame_01
> hostname=sip1.titl.ru
> sip_port=5060
> use_registrar=1
> as_proxy=1
> registrar=sip:sip1.titl.ru
> passwd=mypassword
> addr_of_rec=sip:address@hidden
> expires=900
>
> [rtp]
> audio_rtp_port=7078
> video_rtp_port=0
> audio_jitt_comp=60
> video_jitt_comp=60
>
> [sound]
> dev_id=2
> rec_lev=80
> play_lev=80
> source=m
> local_ring=/usr/local/share/sounds/linphone/rings/oldphone.wav
> remote_ring=/usr/local/share/sounds/linphone/ringback.wav
>
> [video]
> enabled=0
> show_local=0
>
> [audio_codec_0]
> mime=GSM
> rate=8000
> enabled=1
>
> [address_book]
> entry_count=0