[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Ltib] LTIB port for mcp8270

From: Stuart Hughes
Subject: Re: [Ltib] LTIB port for mcp8270
Date: Thu, 31 May 2007 08:36:35 +0100

Hi Joseph,

I think from Freescale's point of view that's right as for "official"
BSPs they'll tend to concentrate more on newer devices.

As I mentioned before, there exists an external LTIB project, if you can
contribute a kernel+kernel config file, I'm happy to help you put
together a BSP for it.

Regards, Stuart

On Wed, 2007-05-30 at 14:56 -0400, Joseph E. Sacco, Ph.D. wrote:
> I pinged Freescale support. The response is shown below.
> Interesting...
> -Joseph
> ============================================================
> Dear Joseph Sacco, 
> In reply to your Service Request SR 1-362864531: 
> Thanks for your patience speaking with marketing manager I was told.  
> We are not road mapping a revised Linux BSP for the MPC82xx that would
> include the LTIB port.  Our customers would need to use one of our 3rd
> parties for a customization tool similar to LTIB or PCS on the MPC82xx
> platforms. 
> I hope this helps with your question,
> Thank you for your interest in Freescale Semiconductor products and for
> the opportunity to serve you. 
> Should you need to contact us with regard to this message, please see
> the notes below.
> Best Regards,
> Pamela 
> Technical Support
> Freescale Semiconductor

reply via email to

[Prev in Thread] Current Thread [Next in Thread]