ltib
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Ltib] XFree86 package


From: Stuart Hughes
Subject: Re: [Ltib] XFree86 package
Date: Wed, 15 Aug 2007 08:42:20 +0100

Hi Ken, 

This package is not supported, only the ones selectable from the config
system are likely to build, but sometimes even then not on all platforms
(as sometimes a package gets put in for one architecture, but not fully
built/tested for all).

I have a lot of pending changes to go into LTIB which I hope to get in
once I've finished another internal project.  One of these changes is to
add proper handling of pkg-config and linking indirect library
references.  This would help a great deal with something like XFree86.

In terms of philosophical approach LTIB is not intended to be a full
distribution as there are many good ones about.  For me it's there to
address the availability of a common userspace package set that can
scale down to smaller devices.

Regards, Stuart

On Tue, 2007-08-14 at 17:32 -0400, Ken Gilmer wrote:
> 
> Hello ~
> 
>     I'm trying to build the XFree86 LTIB package and am running into  
> errors very early in the build process.  Is this package supported?   
> I'm using a BSP provided with the i.MX31 development board.
> 
> Thanks!
> Ken
> 
> Build output:
> 
> address@hidden ltib-imx31ads-20070128]$ ./ltib -m scbuild -p  
> XFree86.spec
> 
> Processing: XFree86
> =====================
> rpmbuild --dbpath /home/kgilmer/julyeffort/ltib-imx31ads-20070128/ 
> rpmdb --define '_unpackaged_files_terminate_build 0' --define  
> '_target_cpu arm' --define '__strip strip' --define '_topdir /home/ 
> kgilmer/julyeffort/ltib-imx31ads-20070128/rpm' --define '_prefix / 
> usr' --define '_tmppath /home/kgilmer/julyeffort/ltib- 
> imx31ads-20070128/tmp' --define '_mandir /usr/share/man' --define  
> '_sysconfdir /etc' --define '_localstatedir /var' -bc --short- 
> circuit  /home/kgilmer/julyeffort/ltib-imx31ads-20070128/dist/lfs-5.1/ 
> XFree86/XFree86.spec
> Executing(%build): /bin/sh -e /home/kgilmer/julyeffort/ltib- 
> imx31ads-20070128/tmp/rpm-tmp.64030
> + umask 022
> + cd /home/kgilmer/julyeffort/ltib-imx31ads-20070128/rpm/BUILD
> + cd /home/kgilmer/julyeffort/ltib-imx31ads-20070128/rpm/BUILD/ 
> XFree86/xc
> + make World WORLDOPTS=
> 
> /bin/sh: ./config/util/printver.exe: cannot execute binary file
> Building XFree86.
> 
> I hope you checked the configuration parameters in ./config/cf
> to see if you need to pass BOOTSTRAPCFLAGS.
> 
> Tue Aug 14 15:42:45 EDT 2007
> 
> cd ./config/imake && make  -f Makefile.ini BOOTSTRAPCFLAGS=""  
> CC="gcc" clean
> make[1]: Entering directory `/home/kgilmer/julyeffort/ltib- 
> imx31ads-20070128/rpm/BUILD/XFree86/xc/config/imake'
> rm -f ccimake imake.o imake
> rm -f *.CKP *.ln *.BAK *.bak *.o core errs ,* *~ *.a tags TAGS  
> make.log \#*
> rm -f -r Makefile.proto Makefile Makefile.dep bootstrap
> rm -f imakemdep_cpp.h
> make[1]: Leaving directory `/home/kgilmer/julyeffort/ltib- 
> imx31ads-20070128/rpm/BUILD/XFree86/xc/config/imake'
> make  Makefile.boot
> make[1]: Entering directory `/home/kgilmer/julyeffort/ltib- 
> imx31ads-20070128/rpm/BUILD/XFree86/xc'
> cd ./config/imake && make -w -f Makefile.ini BOOTSTRAPCFLAGS="" CC="gcc"
> make[2]: Entering directory `/home/kgilmer/julyeffort/ltib- 
> imx31ads-20070128/rpm/BUILD/XFree86/xc/config/imake'
> making imake with BOOTSTRAPCFLAGS= and CROSSCOMPILEFLAGS=- 
> DCROSSCOMPILEDIR="" in config/imake
> gcc -o ccimake -DCROSSCOMPILEDIR=\"\"  -O -I../../include -I../../ 
> imports/x11/include/X11 ccimake.c
> if [ -n "" ] ; then \
> /cc -E `./ccimake` \
> -DCROSSCOMPILE_CPP imakemdep.h > imakemdep_cpp.h; \
> else touch imakemdep_cpp.h; fi
> gcc -c  -O -I../../include -I../../imports/x11/include/X11 `./ 
> ccimake` imake.c
> /bin/sh: ./ccimake: cannot execute binary file
> gcc -o imake  -O -I../../include -I../../imports/x11/include/X11 imake.o
> make[2]: Leaving directory `/home/kgilmer/julyeffort/ltib- 
> imx31ads-20070128/rpm/BUILD/XFree86/xc/config/imake'
> rm -f ./config/makedepend/Makefile.proto
> ./config/imake/imake -I./config/cf  -s ./config/makedepend/ 
> Makefile.proto -f ./config/makedepend/Imakefile -DTOPDIR=../.. - 
> DCURDIR=./config/makedepend
> ./config/imake/imake: ./config/imake/imake: cannot execute binary file
> make[1]: *** [config/makedepend/Makefile.proto] Error 126
> make[1]: Leaving directory `/home/kgilmer/julyeffort/ltib- 
> imx31ads-20070128/rpm/BUILD/XFree86/xc'
> make: *** [World] Error 2
> error: Bad exit status from /home/kgilmer/julyeffort/ltib- 
> imx31ads-20070128/tmp/rpm-tmp.64030 (%build)
> 
> 
> RPM build errors:
>      Bad exit status from /home/kgilmer/julyeffort/ltib- 
> imx31ads-20070128/tmp/rpm-tmp.64030 (%build)
> Build time for XFree86: 3 seconds
> 
> Failed building XFree86
> 
> 
> _______________________________________________
> LTIB home page: http://bitshrine.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib





reply via email to

[Prev in Thread] Current Thread [Next in Thread]