ltib
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Ltib] Re: LTIB of fc9


From: Stuart Hughes
Subject: [Ltib] Re: LTIB of fc9
Date: Wed, 20 Aug 2008 16:05:20 +0100

Hi Vijay,

You need to contact Freescale for support on ISO versions.  However, it
looks to me like you need an update to your flex spec file (2.5.4).

There's a later version in Savannah CVS.

Regards, Stuart


On Wed, 2008-08-20 at 17:34 +0530, Vijay Nikam wrote:
> Hello,
>  
> I am installing LTIB on Fedore Core 9 (fc9) ... the inital
> installation was successful ... 
>  
> then to complete the installation I need to run './ltib' command but
> it fails at the following place;
>  
> ############################### Start
> #################################################
> make: *** [parse.c] Segmentation fault
> error: Bad exit status
> from /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818 
> (%build)
> 
> 
> RPM build errors:
>     Bad exit status
> from /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818 
> (%build)
> Build time for flex: 1 seconds
> 
> Failed building flex
> Died at ./ltib line 1192. 
> 
> ############################# End
> #####################################################
> 
> following is the complete log 
> 
> ############################### LOG Start
> ###############################################
> 
> Updating lpp from local packages
> 
> Processing platform: Host support packages
> ============================================
> using 
> /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/config/platform/host/ltib.preconfig
> 
> Processing: fake-provides
> ===========================
> 
> Processing: mkspooflinks
> ==========================
> 
> Processing: bison
> ===================
> 
> Processing: flex
> ==================
> 
> Cowardly refusing to clobber existing directory:
>      /opt/freescale/ltib/usr/src/rpm/BUILD/flex-2.5.4
> Remove this by hand if you really want to rebuild this package from
> scratch
> 
> scbuild/scdeploy already unpacked package
> 
> Processing: flex
> ==================
> rpmbuild --dbpath /opt/freescale/ltib/var/lib/rpm --define
> '_unpackaged_files_terminate_build 0' --define '_target_cpu i686'
> --define '__strip strip' --define
> '_topdir /opt/freescale/ltib/usr/src/rpm' --define
> '_prefix /opt/freescale/ltib/usr' --define
> '_tmppath /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp'
> --define '_mandir /opt/freescale/ltib/usr/share/man' --define
> '_sysconfdir /opt/freescale/ltib/etc' --define '_localstatedir /var'
> -bc
> --short-circuit  
> /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/dist/lfs-5.1/flex/flex.spec
> Executing(%build): /bin/sh
> -e /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818
> + umask 022
> + cd /opt/freescale/ltib/usr/src/rpm/BUILD
> + cd flex-2.5.4
> + ./configure --prefix=/opt/freescale/ltib/usr
> loading cache ./config.cache
> checking whether ln -s works... (cached) yes
> checking for bison... (cached) bison -y
> checking for gcc... (cached) gcc
> checking whether we are using GNU C... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking for ranlib... (cached) ranlib
> checking for a BSD compatible install... (cached) /usr/bin/install -c
> checking whether make sets $MAKE... (cached) yes
> checking for working const... (cached) yes
> checking how to run the C preprocessor... (cached) gcc -E
> checking whether cross-compiling... (cached) no
> checking for ANSI C header files... (cached) yes
> checking for size_t... (cached) yes
> checking for ANSI C header files... (cached) yes
> checking for string.h... (cached) yes
> checking for malloc.h... (cached) yes
> checking for sys/types.h... (cached) yes
> checking for working alloca.h... (cached) yes
> checking for alloca... (cached) yes
> updating cache ./config.cache
> creating ./config.status
> creating Makefile
> creating config.h
> config.h is unchanged
> + make
> bison -y -d ./parse.y
> make: *** [parse.c] Segmentation fault
> error: Bad exit status
> from /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818 
> (%build)
> 
> 
> RPM build errors:
>     Bad exit status
> from /home/messung/ltib_iso/ltib-mpc8313erdb-20070824/tmp/rpm-tmp.93818 
> (%build)
> Build time for flex: 1 seconds
> 
> Failed building flex
> Died at ./ltib line 1192.
> 
> Started: Wed Aug 20 17:24:19 2008
> Ended:   Wed Aug 20 17:24:24 2008
> Elapsed: 5 seconds
> 
> These packages failed to build:
> flex 
> Build Failed
> 
> ############################### LOG End
> ###############################################
> 
> Anyone please suggest some way to proceed ... Kindly please
> acknowledge ... thank you ...
> 
> Kind Regards,
> 
> Vijay Nikam
> 
>  
> 
> 





reply via email to

[Prev in Thread] Current Thread [Next in Thread]