On Mon, 2008-10-20 at 16:15 +0200, Vadim Lebedev wrote:
I'm working with savannah ltib
I've somewhat unusual config:
I've have a kernel built out of LTIB tree
but i have an in-tree kernel module (zaptel) which need to reference
the kernel's .config and .h files.
How can i arrange for this?
If you run $./ltib -m config you can select: "Include kernel headers" it
will install the kernel headers in rootfs/usr/src/linux/ and in your
spec file you can refer to these as (for example with see
Note also that config file gets put into rootfs/linux.config
If this is not enough and you need the whole built kernel tree left
unpacked, you can select (in ./ltib -m config):
"Leave the sources after building"
This will leave the built kernel sources unpacked in rpm/BUILD/linux and
you can refer to these from other spec files as: $RPM_BUILD_DIR/linux
See: dist/lfs-5.1/helloworld/hello_mod.spec for an example.
This time in-tree kernel for imx27ads
and still trying to build zaptel kernel module
the kerenel build's ok but when zaptel is compiled
it does not find blablabla/linux/.config
I know it worked 2 monthes ago, but i'm unable to find what i'm
doing wrong this time.
I see that the kernel is built it's rpm is created and installed but
in the rpm/BUILD dirctory there is no linux directory so zaptel build
It's probably a change in configuration? I don't understand though how
this can happen as if you look in config/userspace/packages.lkc you
This should be enough to force the sources to remain unpacked. Can you
run ./ltib -m config and scroll down to the kernel area and check that
"Leave the sources after building" is enabled.