ltib
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Ltib] Building xorg-server; missing dependencies?


From: Alexandre Paradis
Subject: RE: [Ltib] Building xorg-server; missing dependencies?
Date: Fri, 27 Feb 2009 08:24:08 -0500

Hi Stuart,

Doing "find rootfs -name \*.la" doesn't output any files

Thanks,

--
Alex

-----Original Message-----
From: Stuart Hughes [mailto:address@hidden 
Sent: February 27, 2009 3:35 AM
To: Alexandre Paradis
Cc: address@hidden
Subject: RE: [Ltib] Building xorg-server; missing dependencies?

Hi Alex,

The link is incorrectly picking up libraries from /usr/lib.  Can you do

$ find rootfs -name \*.la

If you see any of these files, that would cause the problem.  If you do
find them, can you then do:

$ rpm --root `pwd`/rootfs -qif /path/to/file.la

This will identify which package is putting these bad (for cross
compile) files into the rootfs.

Regards, Stuart

On Thu, 2009-02-26 at 13:24 -0500, Alexandre Paradis wrote:
> Hi,
> 
> I installed the host components successfully.
> 
> However the "evas" package also doesn't build:
> 
> /bin/sh ../../../../libtool --tag=CC --mode=link gcc  -O0 -g   -o module.la 
> -rpath /usr/lib/evas/modules/engines/software_x11/linux-gnu-powerpc -module 
> -avoid-version evas_engine.lo evas_outbuf.lo evas_x_buffer.lo evas_x_color.lo 
> evas_x_main.lo -L/usr/X11R6/lib -lX11 -lXext -lX11 -lXext -lX11 -lXext -lX11 
> -lXext ../../../../src/lib/libevas.la
> gcc -shared  .libs/evas_engine.o .libs/evas_outbuf.o .libs/evas_x_buffer.o 
> .libs/evas_x_color.o .libs/evas_x_main.o  -Wl,--rpath 
> -Wl,/home/alex/savannah/ltib/rpm/BUILD/evas-0.9.9.050/src/lib/.libs 
> -L/usr/X11R6/lib /usr/lib/libX11.so /usr/lib/libXext.so 
> ../../../../src/lib/.libs/libevas.so  -Wl,-soname -Wl,module.so -o 
> .libs/module.so
> /usr/lib/libX11.so: could not read symbols: File in wrong format
> collect2: ld returned 1 exit status
> make[5]: *** [module.la] Error 1
> make[5]: Leaving directory 
> `/home/alex/savannah/ltib/rpm/BUILD/evas-0.9.9.050/src/modules/engines/software_x11'
> make[4]: *** [all-recursive] Error 1
> make[4]: Leaving directory 
> `/home/alex/savannah/ltib/rpm/BUILD/evas-0.9.9.050/src/modules/engines'
> make[3]: *** [all-recursive] Error 1
> make[3]: Leaving directory 
> `/home/alex/savannah/ltib/rpm/BUILD/evas-0.9.9.050/src/modules'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory 
> `/home/alex/savannah/ltib/rpm/BUILD/evas-0.9.9.050/src'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/home/alex/savannah/ltib/rpm/BUILD/evas-0.9.9.050'
> make: *** [all] Error 2
> error: Bad exit status from /home/alex/savannah/ltib/tmp/rpm-tmp.3990 (%build)
> 
> 
> RPM build errors:
>     Bad exit status from /home/alex/savannah/ltib/tmp/rpm-tmp.3990 (%build)
> Build time for evas: 28 seconds
> 
> 
> It's including the wrong /usr/lib folder?
> 
> 
> Alex
> 
> -----Original Message-----
> From: Stuart Hughes [mailto:address@hidden 
> Sent: February 26, 2009 12:49 PM
> To: Alexandre Paradis
> Cc: address@hidden
> Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> 
> Hi Alex,
> 
> You need to install some host components first, see:
> 
> http://www.libertatia.org/blog/?p=66
> 
> Basically:
> 
>     $ ./ltib –hostcf -p eet.spec
>         $ ./ltib –hostcf -p embryo.spec
>         $ ./ltib –hostcf -p evas.spec
>         $ ./ltib –hostcf -p ecore.spec
>         $ ./ltib –hostcf -p edje.spec
>         
> The startup instructions are out of date, all you need to do is 'startx'
> last time I tried.
> 
> Regards, Stuart
> 
> On Thu, 2009-02-26 at 12:31 -0500, Alexandre Paradis wrote:
> > Hi Stuart,
> > 
> > The libjpeg built successfully, thanks.
> > 
> > I'm at currently at building enlightenment, and the "emotion" package 
> > failed to build:
> > 
> > [snip...]
> > Making all in data
> > make[2]: Entering directory 
> > `/home/alex/savannah/ltib/rpm/BUILD/emotion-0.1.0.042/data'
> > edje_cc -v -id ../data -fd ../data \
> >         ../data/theme.edc \
> >         ../data/theme.edj
> > make[2]: edje_cc: Command not found
> > make[2]: *** [theme.edj] Error 127
> > make[2]: Leaving directory 
> > `/home/alex/savannah/ltib/rpm/BUILD/emotion-0.1.0.042/data'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory 
> > `/home/alex/savannah/ltib/rpm/BUILD/emotion-0.1.0.042'
> > make: *** [all] Error 2
> > error: Bad exit status from /home/alex/savannah/ltib/tmp/rpm-tmp.88468 
> > (%build)
> > 
> > 
> > RPM build errors:
> >     Bad exit status from /home/alex/savannah/ltib/tmp/rpm-tmp.88468 (%build)
> > Build time for emotion: 14 seconds
> > 
> > Failed building emotion
> > 
> > 
> > f_buildrpms() returned an error, exiting
> > traceback:
> >  main:552
> > 
> > 
> > Started: Thu Feb 26 12:19:41 2009
> > Ended:   Thu Feb 26 13:27:17 2009
> > Elapsed: 4056 seconds
> > 
> > These packages failed to build:
> > emotion
> > 
> > Build Failed
> > 
> > Exiting on error or interrupt
> > 
> > 
> > 
> > The edje package built successfully, and I do have "edje_cc" in my root fs:
> > address@hidden ~/savannah/ltib $ locate edje_cc
> > /home/alex/savannah/ltib/rootfs/usr/bin/edje_cc
> > 
> > Any ideas?
> > 
> > Thanks!
> > --
> > Alex
> > 
> > -----Original Message-----
> > From: Stuart Hughes [mailto:address@hidden 
> > Sent: February 26, 2009 10:40 AM
> > To: Alexandre Paradis
> > Cc: address@hidden
> > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > 
> > Hi Alex,
> > 
> > Glad it was something straightforward.  I'd be inclined to not trust
> > anything you built so far and do (save any work first!)
> > 
> > $ rm -rf rpm/BUILD/*
> > $ ./ltib -f
> > 
> > This will force rebuild everything.
> > 
> > Regards, Stuart
> > 
> > On Thu, 2009-02-26 at 10:12 -0500, Alexandre Paradis wrote:
> > > Hi Stuart
> > > 
> > > You're right, I had a misconfiguration on my system.
> > > 
> > > When I did the commands in the ltib shell, it displayed the powerpc gcc, 
> > > not my native one.
> > > 
> > > The problem was that for some reason I can't remember, I had made dynamic 
> > > links to various powerpc-e300c3-linux-gnu-* files, one of them with the 
> > > name "gcc".
> > > 
> > > Stupid mistake of mine, I removed them and now your test shows the 
> > > correct gcc version (my native one).
> > > 
> > > Thanks a LOT for your help.  I'll try building again.
> > > 
> > > --
> > > Alex
> > > 
> > > 
> > > -----Original Message-----
> > > From: Stuart Hughes [mailto:address@hidden 
> > > Sent: February 26, 2009 8:43 AM
> > > To: Alexandre Paradis
> > > Cc: address@hidden
> > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > 
> > > Hi Alex,
> > > 
> > > I just tried the same thing (copy config/platform/mpc5121ads -> Savannah
> > > CVS copy).  I then ran ltib to configure and build this.  It builds
> > > libjpeg without any problem.
> > > 
> > > Processing platform: Freescale MPC512x based boards
> > > =====================================================
> > > using config/platform/mpc5121ads/.config
> > > [snip]
> > > Executing(%build): /bin/sh
> > > -e /home/seh/ltib_bsps/savannah_ltib/tmp/rpm-tmp.60945
> > > + umask 022
> > > + cd /home/seh/ltib_bsps/savannah_ltib/rpm/BUILD
> > > + cd jpeg-6b
> > > + export
> > > PATH=/home/seh/ltib_bsps/savannah_ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-eglibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin
> > > +
> > > PATH=/home/seh/ltib_bsps/savannah_ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-eglibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin
> > > + ./configure --enable-static --enable-shared --target=powerpc-linux
> > > --prefix=/usr
> > > checking for gcc... gcc
> > > checking whether the C compiler (gcc  ) works... yes
> > > checking whether the C compiler (gcc  ) is a cross-compiler... no
> > > checking whether we are using GNU C... yes
> > > checking how to run the C preprocessor... gcc -E
> > > checking for function prototypes... yes
> > > checking for stddef.h... yes
> > > ...
> > > 
> > > The key difference between this and your output is:
> > > 
> > > checking whether the C compiler (gcc  ) is a cross-compiler... no
> > > 
> > > You're says:
> > > >> checking whether the C compiler (gcc  ) is a cross-compiler... yes
> > > 
> > > It looks like you have some miss configuration as it should be finding
> > > the build machines native C compiler.  
> > > 
> > > Let me explain a bit.   If you look at the spec file you'll see:
> > > 
> > > %Build
> > > export PATH=$UNSPOOF_PATH
> > > ./configure --enable-static --enable-shared --target=$CFGHOST --prefix=
> > > %{_prefix}
> > > export PATH=$SPOOF_PATH
> > > make
> > > 
> > > This is a bit unusual inasmuch that configure is done without spoofing
> > > (e.g. gcc is not an alias for the cross compiler, or should not be).
> > > >From my notes this is because:
> > > 
> > > Get libjpeg to cross compile by using UNSPOOF_PATH for ./configure and
> > > SPOOF_PATH for make.  All this is necessary because ./configure calls
> > > ltconfig which inturn calls config.guess which trys to compile and run a
> > > test .c program using the first gcc in its path.
> > > 
> > > To get to the bottom of this, can you run the following:
> > > 
> > > $ ./ltib -m shell
> > > LTIB> export PATH=$UNSPOOF_PATH
> > > LTIB> which gcc
> > > ...
> > > LTIB> gcc -v
> > > ...
> > > LTIB> exit
> > > $
> > > 
> > > The output will show which compiler gcc is.  It should be the native one
> > > on your build machine.  For example mine shows:
> > > 
> > > LTIB> which gcc
> > > /usr/bin/gcc
> > > 
> > > LTIB> gcc -v
> > > Using built-in specs.
> > > Target: i386-redhat-linux
> > > Configured with: ../configure --prefix=/usr --mandir=/usr/share/man
> > > --infodir=/usr/share/info --enable-shared --enable-threads=posix
> > > --enable-checking=release --with-system-zlib --enable-__cxa_atexit
> > > --disable-libunwind-exceptions --enable-libgcj-multifile
> > > --enable-languages=c,c++,objc,java,f95,ada --enable-java-awt=gtk
> > > --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre
> > > --host=i386-redhat-linux
> > > Thread model: posix
> > > gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)
> > > 
> > > Regards, Stuart
> > > 
> > > On Wed, 2009-02-25 at 11:23 -0500, Alexandre Paradis wrote:
> > > > Hi Stuart, 
> > > > 
> > > > Here is the LTIB output using Savannah CVS, and my config file.
> > > > 
> > > > Thanks,
> > > > 
> > > > --
> > > > Alex
> > > > 
> > > > -----Original Message-----
> > > > From: Stuart Hughes [mailto:address@hidden 
> > > > Sent: February 25, 2009 9:50 AM
> > > > To: Alexandre Paradis
> > > > Cc: address@hidden
> > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > > 
> > > > Hi Alex,
> > > > 
> > > > You're on the wrong track here I think.  You should not need to do this.
> > > > 
> > > > Anything under rpm/BUILD is not under CVS and so is generated.  If this
> > > > build is failing, removed rpm/BUILD/_failed_package_ and then re-try.
> > > > 
> > > > If that doesn't work please post the LTIB output.  I need to know the
> > > > command you ran, which LTIB (Savannah?) and also which configuration
> > > > you're using (cat .config and then send me
> > > > config/platform/_target_/.config)
> > > > 
> > > > Regards, Stuart
> > > > 
> > > > On Wed, 2009-02-25 at 09:27 -0500, Alexandre Paradis wrote:
> > > > > OK, I fixed it by replacing the config.sub and config.guess from 
> > > > > http://cvs.savannah.gnu.org/viewvc/~checkout~/config/config/
> > > > > 
> > > > > I replaced them in the /home/alex/savannah/ltib/rpm/BUILD/jpeg-6b 
> > > > > then re-ran ./ltib
> > > > > 
> > > > > Is this something that would need to be added to the GPP package?
> > > > > 
> > > > > --
> > > > > Alex
> > > > > 
> > > > > -----Original Message-----
> > > > > From: address@hidden [mailto:address@hidden On Behalf Of Alexandre 
> > > > > Paradis
> > > > > Sent: February 25, 2009 9:01 AM
> > > > > To: Stuart Hughes
> > > > > Cc: address@hidden
> > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > > > 
> > > > > Hi Stuart,
> > > > > 
> > > > > libjpeg failed to build:
> > > > > 
> > > > > /// OUTPUT ///
> > > > > checking host system type... ./config.guess: line 618: ./dummy: 
> > > > > cannot execute binary file
> > > > > ./config.guess: line 848: ./dummy: cannot execute binary file
> > > > > ltconfig: cannot guess host type; you must specify one Try `ltconfig 
> > > > > --help' for more information.
> > > > > checking libjpeg version number... 62
> > > > > creating ./config.status
> > > > > creating Makefile
> > > > > creating jconfig.h
> > > > > + export 
> > > > > + 
> > > > > PATH=/home/alex/savannah/ltib/bin:/opt/ltib/usr/spoof:/home/alex/savan
> > > > > + 
> > > > > nah/ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-egl
> > > > > + 
> > > > > ibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin
> > > > > + :/usr/bin/X11:/usr/X11R6/bin 
> > > > > + 
> > > > > PATH=/home/alex/savannah/ltib/bin:/opt/ltib/usr/spoof:/home/alex/savan
> > > > > + 
> > > > > nah/ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-egl
> > > > > + 
> > > > > ibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin
> > > > > + :/usr/bin/X11:/usr/X11R6/bin
> > > > > + make
> > > > > ./libtool --mode=compile gcc -O2  -I. -c ./jcapimin.c
> > > > > make: ./libtool: Command not found
> > > > > make: *** [jcapimin.lo] Error 127
> > > > > error: Bad exit status from 
> > > > > /home/alex/savannah/ltib/tmp/rpm-tmp.15054 (%build)
> > > > > 
> > > > > 
> > > > > RPM build errors:
> > > > >     Bad exit status from /home/alex/savannah/ltib/tmp/rpm-tmp.15054 
> > > > > (%build) Build time for libjpeg: 2 seconds /// END OUTPUT ///
> > > > > 
> > > > > 
> > > > > I do have libtool installed on my system, but it seems it's trying to 
> > > > > run it from the local folder? (./libtool)
> > > > > 
> > > > > 
> > > > > --
> > > > > Alex
> > > > > 
> > > > > -----Original Message-----
> > > > > From: Stuart Hughes [mailto:address@hidden
> > > > > Sent: February 25, 2009 4:00 AM
> > > > > To: Alexandre Paradis
> > > > > Cc: address@hidden
> > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > > > 
> > > > > Hi Alex,
> > > > > 
> > > > > cross-gdb/gdbserver should also build.  If you want those later we 
> > > > > can try to debug what is wrong.
> > > > > 
> > > > > Regards, Stuart
> > > > > 
> > > > > On Tue, 2009-02-24 at 16:44 -0500, Alexandre Paradis wrote:
> > > > > > I think I just selected the wrong gdb package in the list.
> > > > > > 
> > > > > > I'm rebuilding with the native gdb package instead (without 
> > > > > > cross-gdb 
> > > > > > and gdbserver), and it didn't stop this time, so you can ignore my 
> > > > > > last question ;)
> > > > > > 
> > > > > > --
> > > > > > Alex
> > > > > > 
> > > > > > -----Original Message-----
> > > > > > From: address@hidden 
> > > > > > [mailto:address@hidden On Behalf Of 
> > > > > > Alexandre Paradis
> > > > > > Sent: February 24, 2009 4:14 PM
> > > > > > To: Stuart Hughes
> > > > > > Cc: address@hidden
> > > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > > > > 
> > > > > > Hi Stuart,
> > > > > > 
> > > > > > Things are moving along.. ;)
> > > > > > 
> > > > > > Going forth with option #2, I performed the following as per your 
> > > > > > advice
> > > > > > 
> > > > > > 1. Checkout the current CVS
> > > > > > 2. Copied the MPC5121 configs from the old BSP to the latest 
> > > > > > version 
> > > > > > 3. Configured my packages (the build process failed before I did 
> > > > > > the 
> > > > > > next step) 4. ** Copied the *mpc5121*.spec files for u-boot and the 
> > > > > > kernel from my old BSP to the latest dist/lfs/ folders
> > > > > > 
> > > > > > I re-started the build process, and everything seemed to work, 
> > > > > > except when it got to the GDB package.
> > > > > > 
> > > > > > It's complaining that it can't execute compiled binaries (obviously 
> > > > > > since we're cross-compiling), and says that I should add the 
> > > > > > "--host" flag:
> > > > > >     
> > > > > >     checking whether the C compiler works... configure: error: 
> > > > > > cannot run C compiled programs.
> > > > > >     If you meant to cross compile, use `--host'.
> > > > > >     See `config.log' for more details.
> > > > > >     error: Bad exit status from 
> > > > > > /home/alex/savannah/ltib/tmp/rpm-tmp.74257 (%build)
> > > > > > 
> > > > > > While I don’t necessarily *need* GDB, it'd be nice to have it.  
> > > > > > Where would I add this flag?
> > > > > > 
> > > > > > Thanks a lot for your help!
> > > > > > 
> > > > > > --
> > > > > > Alex
> > > > > > 
> > > > > > 
> > > > > > -----Original Message-----
> > > > > > From: Stuart Hughes [mailto:address@hidden
> > > > > > Sent: February 23, 2009 10:22 AM
> > > > > > To: Alexandre Paradis
> > > > > > Cc: address@hidden
> > > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > > > > 
> > > > > > Hi Alex,
> > > > > > 
> > > > > > If you go for option 2:
> > > > > > 
> > > > > > * checkout Savannah CVS
> > > > > > * do a cp -a old_bsp/config/platform/mpc5121ads 
> > > > > > savannah/config/platform/
> > > > > > * cd  savannah
> > > > > > * ./ltib
> > > > > > * select mpc5121ads
> > > > > > * let it build the default and check it works for you
> > > > > > * ./ltib -m config
> > > > > > * select the X11 stuff
> > > > > > * ./ltib
> > > > > > * let it build
> > > > > > 
> > > > > > The Savannah copy has nothing pre-built, so in effect you are 
> > > > > > starting from clean.
> > > > > > 
> > > > > > If you want your old BSP back to it's original pristine state you 
> > > > > > can do (in old_bsp):
> > > > > > ./ltib --preconfig config/platform/mpc5121ads/defconfig
> > > > > > 
> > > > > > Regards, Stuart
> > > > > > 
> > > > > > On Mon, 2009-02-23 at 09:48 -0500, Alexandre Paradis wrote:
> > > > > > > The BSP is dated 2008-12-08, which seems to be the latest version 
> > > > > > > they have.
> > > > > > > 
> > > > > > > I'll go for option #2.
> > > > > > > 
> > > > > > > Should I clean everything since I already added packages using 
> > > > > > > the wrong commands?
> > > > > > > 
> > > > > > > --
> > > > > > > Alex
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > -----Original Message-----
> > > > > > > From: Stuart Hughes [mailto:address@hidden
> > > > > > > Sent: February 23, 2009 9:31 AM
> > > > > > > To: Alexandre Paradis
> > > > > > > Cc: address@hidden
> > > > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
> > > > > > > 
> > > > > > > Hi Alex,
> > > > > > > 
> > > > > > > I guess you're using an older Freescale BSP?
> > > > > > > 
> > > > > > > If so your best bet is to try this:
> > > > > > > 
> > > > > > > 1/ Ask Freescale if they have a later BSP (the X11 stuff went in 
> > > > > > > around Nov/Dec last year IIRC).
> > > > > > > 
> > > > > > > 2/ If not, use the Savannah LTIB CVS and copy the
> > > > > > > config/platform/mpc5121 you have into that copy.  I can't 
> > > > > > > guarantee 
> > > > > > > this will work, but at least you'll see the X11 selections.
> > > > > > > 
> > > > > > > Regards, Stuart
> > > > > > > 
> > > > > > > On Mon, 2009-02-23 at 08:54 -0500, Alexandre Paradis wrote:
> > > > > > > > Hi Stuart,
> > > > > > > > 
> > > > > > > > I can't find X11 in the package list.  Would I need to update 
> > > > > > > > ltib for them to show up?
> > > > > > > > 
> > > > > > > > Thanks,
> > > > > > > > 
> > > > > > > > --
> > > > > > > > Alex
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > -----Original Message-----
> > > > > > > > From: Stuart Hughes [mailto:address@hidden
> > > > > > > > Sent: February 23, 2009 3:52 AM
> > > > > > > > To: Alexandre Paradis
> > > > > > > > Cc: address@hidden
> > > > > > > > Subject: Re: [Ltib] Building xorg-server; missing dependencies?
> > > > > > > > 
> > > > > > > > Hi Alex,
> > > > > > > > 
> > > > > > > > That's the wrong way to add packages.  Run:
> > > > > > > > 
> > > > > > > > $ ./ltib -m config
> > > > > > > > 
> > > > > > > > Select:
> > > > > > > > 
> > > > > > > >     X11  --->
> > > > > > > >     Install X11 (X.Org 7.3)  --->
> > > > > > > > 
> > > > > > > > And all the packages needed will be turned on.  You probably 
> > > > > > > > want 
> > > > > > > > to also select some kind of window manager (enlightenment 
> > > > > > > > maybe).  
> > > > > > > > Once done, save an exit then run:
> > > > > > > > 
> > > > > > > > $ ./ltib
> > > > > > > > 
> > > > > > > > NOTE: ./ltib -p <pkg> is normally only used if you're 
> > > > > > > > developing a 
> > > > > > > > single package.  See the FAQ.
> > > > > > > > 
> > > > > > > > Regards, Stuart
> > > > > > > > 
> > > > > > > > On Fri, 2009-02-20 at 15:45 -0500, Alexandre Paradis wrote:
> > > > > > > > > Hi,
> > > > > > > > > 
> > > > > > > > > I need to build the xorg-server package, but I seem to be 
> > > > > > > > > missing some needed packages.
> > > > > > > > > 
> > > > > > > > > I'm currently using LTIB from a Freescale BSP for the MPC5121:
> > > > > > > > > 
> > > > > > > > >       address@hidden
> > > > > > > > > ~/ltib/ltib-mpc5121ads-20081208/config/userspace $ cat 
> > > > > > > > > ../../RELEASE_INFO
> > > > > > > > >       Release date = Fri Feb 20 20:20:58 2009 UTC
> > > > > > > > >       Release user = alex
> > > > > > > > >       Release host = dev-station
> > > > > > > > >       Release dir  = /home/alex/ltib/ltib-mpc5121ads-20081208
> > > > > > > > >       CVS wtag     = none
> > > > > > > > >       CVS tag      = none
> > > > > > > > >       Release tag  = none
> > > > > > > > >       App version  = 8.1.2
> > > > > > > > >       CVS version  = 1.421.4.1
> > > > > > > > >       git version  = none
> > > > > > > > > 
> > > > > > > > > I successfully added the some dependent packages using the 
> > > > > > > > > following
> > > > > > > > > commands:
> > > > > > > > > 
> > > > > > > > >       ./ltib -p pixman.spec
> > > > > > > > >       ./ltib -p randrproto.spec
> > > > > > > > >       ./ltib -p renderproto.spec
> > > > > > > > >       ./ltib -p fixesproto.spec
> > > > > > > > >       ./ltib -p damageproto.spec
> > > > > > > > >       ./ltib -p xcmiscproto.spec
> > > > > > > > >       ./ltib -p extproto.spec
> > > > > > > > >       ./ltib -p xproto.spec
> > > > > > > > >       ./ltib -p xtrans.spec
> > > > > > > > >       ./ltib -p scrnsaverproto.spec
> > > > > > > > >       ./ltib -p bigreqsproto.spec
> > > > > > > > >       ./ltib -p resourceproto.spec
> > > > > > > > >       ./ltib -p fontsproto.spec
> > > > > > > > >       ./ltib -p inputproto.spec
> > > > > > > > >       ./ltib -p kbproto.spec
> > > > > > > > >       ./ltib -p videoproto.spec
> > > > > > > > >       ./ltib -p compositeproto.spec
> > > > > > > > >       ./ltib -p recordproto.spec
> > > > > > > > >       ./ltib -p resourceproto.spec
> > > > > > > > > 
> > > > > > > > > However.. I'm still missing a couple of packages which I 
> > > > > > > > > can't 
> > > > > > > > > seem to find on the GPP, mainly 'xkbfile', 'xfont', 'xau' and 
> > > > > > > > > 'fontenc'.
> > > > > > > > > 
> > > > > > > > > Where can I find these? Do I need to get them from a source 
> > > > > > > > > tarball, and create my own package along with a .spec file?
> > > > > > > > > 
> > > > > > > > > Any help is greatly appreciated.
> > > > > > > > > 
> > > > > > > > > Thanks!
> > > > > > > > > 
> > > > > > > > > --
> > > > > > > > > Alexandre Paradis
> > > > > > > > > 
> > > > > > > > > Alexandre Paradis, Technology Architect / Architecte 
> > > > > > > > > technologique
> > > > > > > > > 
> > > > > > > > > bluberi gaming technologies inc.
> > > > > > > > > Drummondville, Quebec  Canada
> > > > > > > > > 819.475.5155 (telephone) 819.475.5156 (fax) bluberi.com
> > > > > > > > >  
> > > > > > > > > ----------------------------------------------------------------
> > > > > > > > > --
> > > > > > > > > -------- This e-mail and any attachments transmitted with it 
> > > > > > > > > are 
> > > > > > > > > personal, privileged and confidential and solely for the use 
> > > > > > > > > of the individual to whom they are addressed and intended. If 
> > > > > > > > > you have received this e-mail in error, please notify the 
> > > > > > > > > sender by return e-mail. If you are not the intended 
> > > > > > > > > recipient or if you believe that you are not, you are hereby 
> > > > > > > > > notified that the dissemination, distribution, plagiarism or 
> > > > > > > > > copying of this e-mail and attachments transmitted with it is 
> > > > > > > > > strictly prohibited. NOTICE: We have taken reasonable 
> > > > > > > > > precautions to prevent viruses from being present in this 
> > > > > > > > > e-mail. We do not accept responsibility for any loss or 
> > > > > > > > > damage arising from the use of this e-mail or attachments.
> > > > > > > > >  
> > > > > > > > > Ce courriel et les pièces jointes s’y rattachant sont de 
> > > > > > > > > nature personnelle, privilégiée et confidentielle et pour 
> > > > > > > > > l’usage exclusif du destinataire à qui ils sont adressés et 
> > > > > > > > > destinés. Si vous avez reçu ce courriel par erreur, veuillez 
> > > > > > > > > s’il vous plaît le renvoyer à l’expéditeur. Si vous n’êtes 
> > > > > > > > > pas le bon destinataire ou si vous croyez ne pas l’être, nous 
> > > > > > > > > vous informons immédiatement que la publication, 
> > > > > > > > > distribution, diffusion, copie ou plagiat de ce courriel et 
> > > > > > > > > de ses pièces jointes sont strictement interdits. 
> > > > > > > > > AVERTISSEMENT : Nous avons pris des mesures raisonnables afin 
> > > > > > > > > de prévenir toute propagation de virus par le biais de ce 
> > > > > > > > > courriel. Nous n’accepterons donc aucune responsabilité pour 
> > > > > > > > > des dommages ou pertes provenant de l’utilisation de ce 
> > > > > > > > > courriel ou de ses pièces jointes.
> > > > > > > > > ----------------------------------------------------------------
> > > > > > > > > --
> > > > > > > > > --------
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > _______________________________________________
> > > > > > > > > LTIB home page: http://bitshrine.org
> > > > > > > > > 
> > > > > > > > > Ltib mailing list
> > > > > > > > > address@hidden
> > > > > > > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > > > > > > > 
> > > > > > > > 
> > > > > > > 
> > > > > > 
> > > > > 
> > > > 
> > > > _______________________________________________
> > > > LTIB home page: http://bitshrine.org
> > > > 
> > > > Ltib mailing list
> > > > address@hidden
> > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > 
> > > _______________________________________________
> > > LTIB home page: http://bitshrine.org
> > > 
> > > Ltib mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/ltib
> > 
> 


reply via email to

[Prev in Thread] Current Thread [Next in Thread]