[Ltib] Re: Ltib Build failed for texinfo

[Stuart Hughes]

Hi Nirmala,

 * Which host distribution you're running on.

If it's Ubunutu can you check to see what /bin/sh points to, there have 
been issues with dash in the past.

Can you compress and send me your complete host_config.log off-list.

You can ignore the warnings about HTTP::Request::Common, LWP::UserAgent, 
but if you use proxies to access the internet things will work better if 
you install them (they in the perl-lwp package IIRC).

Regards, Stuart

Nirmala wrote:
> Hi Stuart,
>    Ltib is from Savannah CVS , trying to build ltib for the MPC82XX
> (PowerPC)
>
> and noticed the below warning , which however didn't stop the build
> process of ltib
> -------------------------------------------------------------
> $ ./ltib
> Don't have HTTP::Request::Common
> Don't have LWP::UserAgent
> Cannot test proxies, or remote file availability without both
> HTTP::Request::Common and LWP::UserAgent 
> --------------------------------------------------------------
>
> Thank you,
> Nirmala
>    
>
> On Tue, 2009-05-05 at 17:23 +0100, Stuart Hughes wrote:
> > Hi Nirmala,
> >
> > Can you tell me:
> >
> > * Which version of LTIB you're using (is it from Savannah CVS or from a 
> > Freescale BSP).
> >
> > * Which host distribution you're running on.
> >
> > Regards, Stuart
> >
> > Nirmala wrote:
> > > Hi
> > >   Trying to install ltib for Linux version 2.6.18
> > > Before installing ltib (using ./ltib), verified and installed all the
> > > necessary tools listed at (What is required on your host before
> > > installing LTIB at http://www.bitshrine.org/autodocs/LtibFaq.html#ref_1)
> > >
> > >
> > > But the ltib build failed, below is the error log  snippet:
> > > ---------------------------------------------------------------------
> > >
> > > make  all-recursive
> > > make[1]: Entering directory `/opt/ltib/usr/src/rpm/BUILD/texinfo-4.8'
> > > Making all in tools
> > > make[2]: Entering directory
> > > `/opt/ltib/usr/src/rpm/BUILD/texinfo-4.8/tools'
> > > make[2]: *** No rule to make target `all'.  Stop.
> > > make[2]: Leaving directory
> > > `/opt/ltib/usr/src/rpm/BUILD/texinfo-4.8/tools'
> > > make[1]: *** [all-recursive] Error 1
> > > make[1]: Leaving directory `/opt/ltib/usr/src/rpm/BUILD/texinfo-4.8'
> > > make: *** [all] Error 2
> > > error: Bad exit status from /home/edgedeveloper/ltib/tmp/rpm-tmp.6956 (%
> > > build)
> > >
> > >
> > > RPM build errors:
> > >     Bad exit status from /home/edgedeveloper/ltib/tmp/rpm-tmp.6956 (%
> > > build)
> > > Build time for texinfo: 17 seconds
> > >
> > > Failed building texinfo
> > > Died at ./ltib line 1377.
> > > traceback:
> > >  main::build_host_rpms:1377
> > >   main::host_checks:1432
> > >    main:539
> > >
> > >
> > > Started: Tue May  5 11:01:33 2009
> > > Ended:   Tue May  5 11:01:51 2009
> > > Elapsed: 18 seconds
> > >
> > > These packages failed to build:
> > > texinfo 
> > >
> > > Build Failed 
> > >
> > > Any advice would be appreciated.
> > >
> > > Thank you,
> > > Nirmala