ltib
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Ltib] ltib. add GTK+ packet


From: Stuart Hughes
Subject: Re: [Ltib] ltib. add GTK+ packet
Date: Thu, 09 Jul 2009 19:27:47 +0100
User-agent: Thunderbird 2.0.0.16 (X11/20080707)

Cool!

Dmitry wrote:
Hi, Stuart and Kevin

Started: Thu Jul  9 19:05:33 2009
Ended:   Thu Jul  9 19:23:17 2009
Elapsed: 1064 seconds

Build Succeed


THANK YOU VERY MATCH FOR SUPPORT!!!!



2009/7/9 Stuart Hughes <address@hidden <mailto:address@hidden>>

    Hi Dmitry,

    Sometimes this happens with some packages if the config.cache file
    persists. Possibly you need to first rm -rf rpm/BUILD/gtk*

    If that doesn't fix it you'll need to dig into the source and try to
    debug the point of failure.  Clearly


     `/home/dima/ltib_install_2/ltib/rpm/BUILD/gtk+-2.12.1/demos'
     > no --raw --build-list        \
     >             apple_red  ./apple-red.png    \
     >                 gnome_foot ./gnome-foot.png    \
     >         > test-inline-pixbufs.h                \

    Is wrong, from my notes the problem was gdk-pixbuf-csource not being
    found by configure and being left as an empty parameter.

    BTW: please keep messages on the list and if you can plain text is
    preferred in messages.

    Regards, Stuart


    Dmitry wrote:

        Hi, Stuart

        I still receive the same error (see below), in my log you can
        see GTK+ packets was installed on my host mashine.

        creating libprintbackend-lpr.la <http://libprintbackend-lpr.la>
        <http://libprintbackend-lpr.la>
        (cd .libs && rm -f libprintbackend-lpr.la
        <http://libprintbackend-lpr.la> <http://libprintbackend-lpr.la>
        && ln -s ../libprintbackend-lpr.la
        <http://libprintbackend-lpr.la> <http://libprintbackend-lpr.la>
        libprintbackend-lpr.la <http://libprintbackend-lpr.la>
        <http://libprintbackend-lpr.la>)

        make[4]: Leaving directory
        
`/home/dima/ltib_install_2/ltib/rpm/BUILD/gtk+-2.12.1/modules/printbackends/lpr'
        make[4]: Entering directory
        
`/home/dima/ltib_install_2/ltib/rpm/BUILD/gtk+-2.12.1/modules/printbackends'
        make[4]: Nothing to be done for `all-am'.
        make[4]: Leaving directory
        
`/home/dima/ltib_install_2/ltib/rpm/BUILD/gtk+-2.12.1/modules/printbackends'
        make[3]: Leaving directory
        
`/home/dima/ltib_install_2/ltib/rpm/BUILD/gtk+-2.12.1/modules/printbackends'
        make[3]: Entering directory
        `/home/dima/ltib_install_2/ltib/rpm/BUILD/gtk+-2.12.1/modules'
        make[3]: Nothing to be done for `all-am'.
        make[3]: Leaving directory
        `/home/dima/ltib_install_2/ltib/rpm/BUILD/gtk+-2.12.1/modules'
        make[2]: Leaving directory
        `/home/dima/ltib_install_2/ltib/rpm/BUILD/gtk+-2.12.1/modules'
        Making all in demos
        make[2]: Entering directory
        `/home/dima/ltib_install_2/ltib/rpm/BUILD/gtk+-2.12.1/demos'
        no --raw --build-list        \
                   apple_red  ./apple-red.png    \
                       gnome_foot ./gnome-foot.png    \
               > test-inline-pixbufs.h                \
           || (rm -f test-inline-pixbufs.h && false)
        /bin/bash: no: command not found
        make[2]: *** [test-inline-pixbufs.h] Error 1
        make[2]: Leaving directory
        `/home/dima/ltib_install_2/ltib/rpm/BUILD/gtk+-2.12.1/demos'
        make[1]: *** [all-recursive] Error 1
        make[1]: Leaving directory
        `/home/dima/ltib_install_2/ltib/rpm/BUILD/gtk+-2.12.1'
        make: *** [all] Error 2
        error: Bad exit status from
        /home/dima/ltib_install_2/ltib/tmp/rpm-tmp.61883 (%build)


        RPM build errors:
           Bad exit status from
        /home/dima/ltib_install_2/ltib/tmp/rpm-tmp.61883 (%build)
        Build time for gtk2: 537 seconds

        Failed building gtk2


        f_buildrpms() returned an error, exiting
        traceback:
         main:554


        Started: Thu Jul  9 15:41:44 2009
        Ended:   Thu Jul  9 15:52:07 2009
        Elapsed: 623 seconds

        These packages failed to build:
        gtk2

        Build Failed

        Exiting on error or interrupt
        address@hidden:~/ltib_install_2/ltib$
        address@hidden:~/ltib_install_2/ltib$ *gdk-pixbuf-csource*
        Usage: gdk-pixbuf-csource [options] [image]
              gdk-pixbuf-csource [options] --build-list [[name image]...]
         --stream                   generate pixbuf data stream
         --struct                   generate GdkPixdata structure
         --macros                   generate image size/pixel macros
         --rle                      use one byte run-length-encoding
         --raw                      provide raw image data copy
         --extern                   generate extern symbols
         --static                   generate static symbols
         --decoder                  provide rle decoder
         --name=identifier          C macro/variable name
         --build-list               parse (name, image) pairs
         -h, --help                 show this help message
         -v, --version              print version informations
         --g-fatal-warnings         make warnings fatal (abort)
        address@hidden:~/ltib_install_2/ltib$
        address@hidden:~/ltib_install_2/ltib$
        address@hidden:~/ltib_install_2/ltib$ *pkg-config --libs
        gtk+-2.0*
        -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lpangoft2-1.0
        -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lgio-2.0 -lcairo
        -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0
        -lglib-2.0 address@hidden:~/ltib_install_2/ltib$




        2009/7/9 Stuart Hughes <address@hidden <mailto:address@hidden>
        <mailto:address@hidden <mailto:address@hidden>>>


           Hi Dmitry, You need to install gtk2-devel on your host which
           provides the missing gdk-pixbuf-csource utility. Regards, Stuart




--
Best Regards,
Dmitry.
Embedded Development Engineer
Israel.
Mobile:
  052 6 144 338
  0507 63 53 10




reply via email to

[Prev in Thread] Current Thread [Next in Thread]