Re: [Ltib] Installation problems with Mandriva 2009.1 (mtd-utils)

[Stuart Hughes]

Hi Mark,

I've seen that happen too when you have continued build of rpm-fs.  To 
fix it:

$ rm -rf /tmp/rpm*
$ ./ltib

If that fails, please send the log (or end of it).

Regards, Stuart

Mark Craske wrote:
> Hi Stuart,
>
> My mistake: I have ltib-8-1-2-sv
> That was because of a different problem I encountered
> when I tried to use the latest ltib.
>
> I already amended bin/Ltibutils.pm $app_checks for
> 'rpm-build' and replaced the mtd-utils.spec with the new one
> as suggested by you in
> http://lists.nongnu.org/archive/html/ltib/2009-07/msg00129.html
>
> This means I do have release 2 of the spec file so there is no Patch1.
> I had hoped it would build, but it did not.
>
> The problem I had with the latest ltib was:
>
> ERROR: /tmp/rpm-mcraske/RPMS/i686/rpm-fs-4.0.4-1.i686.rpm
> would clobber '/tib'
> traceback:
>  main::check_host_clobber:2723
>   main::build_rpm:904
>    main::f_scdeploy:1077
>     main::build_rpm:842
>      main::f_buildrpms:978
>       main::check_rpm_setup:2437
>        main::host_checks:1431
>         main:537
>
>
> Regards, Mark
>
> On Wed, 2009-07-15 at 14:23 +0100, Stuart Hughes wrote: 
> > Hi Mark,
> >
> > Are you sure you have the latest from Savannah CVS?  the byteswap patch 
> > was remote from the host mtd-utils spec file.  Can you check:
> >
> > dist/lfs-5.1/mtd-utils/mtd-utils-20060302.spec
> >
> >
> > It should only have at (the start)
> > [snip]
> > Summary         : Memory Technology Device tools
> > Name            : mtd-utils
> > Version         : 20060302
> > Release         : 2
> > License         : GPL
> > Vendor          : Freescale
> > Packager        : Stuart Hughes
> > Group           : Applications/System
> > Source          : %{name}-%{version}.tar.bz2
> > Patch2          : mtd-utils-20060302-find_fs_entry.patch
> > Patch3          : mtd-utils-20060302-eraseall.patch
> > Patch4          : mtd-utils-20060302-eraseall_prog.patch
> > BuildRoot       : %{_tmppath}/%{name}
> > Prefix          : %{pfx}
> > [snip]
> >
> > If that verifies.  Can you verify that when it tries to build mtd-utils 
> > for the host you see:
> >
> > Processing: u-boot-tools
> > ==========================
> >
> > Processing: mtd-utils-20060302
> > ....
> >
> > Regards, Stuart
> >
> >
> > Mark Craske wrote:
> > > I tried to install the latest litb (from CVS) onto Mandriva 2009.1
> > > It failed:
> > >
> > > gcc -I../include -O2 -Wall -g -c -o ftl_format.o ftl_format.c -g
> > > -Wp,-MD,.ftl_format.c.dep
> > > In file included from /usr/include/endian.h:61,
> > >                  from /usr/include/sys/types.h:217,
> > >                  from ftl_format.c:38:
> > > ../include/bits/byteswap.h:21:3: error: #error "Never use
> > > <bits/byteswap.h> directly; include <byteswap.h> instead."
> > > make: *** [ftl_format.o] Error 1
> > > make: Leaving directory `/opt/ltib/usr/src/rpm/BUILD/mtd/util'
> > > ...
> > > Failed building mtd-utils
> > > Died at ./ltib line 1251.
> > > traceback:
> > >  main::build_host_rpms:1251
> > >   main::host_checks:1305
> > >    main:480
> > >
> > > This failure is the same as reported on Fedora FC10.
> > >
> > > It seems to be caused by the mtd-utils build including its
> > > own ../include/bits/byteswap.h instead of the
> > > correct /usr/include/bits/byteswap.h that also checks whether _ENDIAN_H
> > > is defined before reporting the error.
> > >
> > > M Craske