Re: Toolchain issue on LPC3250 (was Re: [Ltib] Building problems)

[Stuart Hughes]

Hi Paolo,

Turn off u-boot in ./ltib -m config and the rest should build.  Your 
board probably has a working u-boot installed already so this should be 
okay.

Regards, Stuart

Paolo Cremonese wrote:
> Hi Stuart,
> I did:
>
> $./ltib -m config
>         [here I change the toolchain]
>         [save]
>
> $./ltib
>         [ to build all.(and I get the error)]
>
> is it correct ?
>
> Regards,
> Paolo
>
>
> On gio, 2009-11-19 at 12:06 +0000, Stuart Hughes wrote:
> > Hi Paolo,
> >
> > I would not suggest building any host toolchains.  Please just make the 
> > selection in ./ltib -m config and allow LTIB to download and install the 
> > binary cross toolchain.
> >
> > You need to clean up whatever you did for this failed attempt first.
> >
> > Regards, Stuart
> >
> > Paolo Cremonese wrote:
> > > Hi Stuart,
> > > I try tu build with the toolchain you suggest, but I get the error
> > > below.
> > > Any suggestion?
> > > Best regards,
> > > Paolo
> > >
> > >
> > > /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/lib/gcc/arm-none-linux-gnueabi/4.1.2/libgcc.a(_udivdi3.o):(.ARM.exidx+0x0):
> > >  undefined reference to `__aeabi_unwind_cpp_pr0'
> > > make: *** [u-boot] Error 1
> > > error: Bad exit status from /home/paolo/LPC3250/ltib/tmp/rpm-tmp.69911
> > > (%build)
> > >
> > >
> > > RPM build errors:
> > >     Bad exit status from /home/paolo/LPC3250/ltib/tmp/rpm-tmp.69911 (%
> > > build)
> > > Build time for u-boot-1.3.3-lpc32xx: 57 seconds
> > >
> > > Failed building u-boot-1.3.3-lpc32xx
> > >
> > >
> > > f_buildrpms() returned an error, exiting
> > > traceback:
> > >  main:561
> > >
> > >
> > > Started: Thu Nov 19 12:36:20 2009
> > > Ended:   Thu Nov 19 12:44:18 2009
> > > Elapsed: 478 seconds
> > >
> > > These packages failed to build:
> > > u-boot-1.3.3-lpc32xx 
> > >
> > > Build Failed
> > >
> > > Exiting on error or interrupt
> > >
> > >
> > > On gio, 2009-11-19 at 11:13 +0000, Stuart Hughes wrote:
> > > > Hi Paolo,
> > > >
> > > > Normally this indicates a real problem with the cross-toolchain. 
> > > > Looking at the defconfig for this package it's: 
> > > > tc-nxp-lnx-arm-3.4.5-1.i386.rpm.  If you want to use this toolchain, 
> > > > you'll need help from the BSP packager for this toolchain.
> > > >
> > > > Alternatively you could try the first one in the list (./ltib -m 
> > > > config): "ARMv5te gcc-4.1.2,Multi-lib,gnueabi/glibc-2.5-nptl-3"
> > > > I've never tried on this BSP but it may work.  It certainly has worked 
> > > > on other ARM platforms.
> > > >
> > > > Regards, Stuart
> > > >
> > > > Paolo Cremonese wrote:
> > > > > Hi Rogerio,
> > > > > Thank you.
> > > > > I have installed the suggested package, and now the error is different:
> > > > > Do you have another suggestion?
> > > > >
> > > > > Best Regards,
> > > > > Paolo
> > > > >
> > > > > Executing(%build): /bin/sh -e /home/paolo/LPC3250/ltib/tmp/rpm-tmp.90397
> > > > > + umask 022
> > > > > + cd /home/paolo/LPC3250/ltib/rpm/BUILD
> > > > > + cd libpng-1.2.8
> > > > > + make prefix=/usr -f scripts/makefile.linux
> > > > > gcc -I../zlib -Wall -O3 -funroll-loops     -c -o png.o png.c
> > > > > gcc -I../zlib -Wall -O3 -funroll-loops     -c -o pngset.o pngset.c
> > > > > gcc -I../zlib -Wall -O3 -funroll-loops     -c -o pngget.o pngget.c
> > > > > gcc -I../zlib -Wall -O3 -funroll-loops     -c -o pngrutil.o pngrutil.c
> > > > > gcc -I../zlib -Wall -O3 -funroll-loops     -c -o pngtrans.o pngtrans.c
> > > > > gcc -I../zlib -Wall -O3 -funroll-loops     -c -o pngwutil.o pngwutil.c
> > > > > gcc -I../zlib -Wall -O3 -funroll-loops     -c -o pngread.o pngread.c
> > > > > gcc -I../zlib -Wall -O3 -funroll-loops     -c -o pngrio.o pngrio.c
> > > > > gcc -I../zlib -Wall -O3 -funroll-loops     -c -o pngwio.o pngwio.c
> > > > > pngrutil.c: In function 'png_get_uint_31':
> > > > > pngrutil.c:47: internal compiler error: Segmentation fault
> > > > > Please submit a full bug report,
> > > > > with preprocessed source if appropriate.
> > > > > See <http://gcc.gnu.org/bugs.html> for instructions.
> > > > > make: *** [pngrutil.o] Error 1
> > > > > make: *** Waiting for unfinished jobs....
> > > > > error: Bad exit status from /home/paolo/LPC3250/ltib/tmp/rpm-tmp.90397
> > > > > (%build)
> > > > >
> > > > >
> > > > > RPM build errors:
> > > > >     Bad exit status from /home/paolo/LPC3250/ltib/tmp/rpm-tmp.90397 (%
> > > > > build)
> > > > > Build time for libpng: 7 seconds
> > > > >
> > > > > Failed building libpng
> > > > >
> > > > >
> > > > > f_buildrpms() returned an error, exiting
> > > > > traceback:
> > > > >  main:561
> > > > >
> > > > >
> > > > > Started: Thu Nov 19 10:56:11 2009
> > > > > Ended:   Thu Nov 19 11:41:07 2009
> > > > > Elapsed: 2696 seconds
> > > > >
> > > > > These packages failed to build:
> > > > > libpng 
> > > > >
> > > > > Build Failed
> > > > >
> > > > > Exiting on error or interrupt