ltib
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Ltib] Invoking ltib fails


From: Naveen Krishna Ch
Subject: Re: [Ltib] Invoking ltib fails
Date: Tue, 8 Dec 2009 12:02:13 +0530

Hi Stuart,
 
Sorry to bother you,
 
I asked my IT people to unblock the site http://cvs.savannah.gnu.org/ with ip 199.232.41.69 as i found using " ip finder ".
The CVS port i found is 2041 (googled it)
for CVS access they say, they have done everything they should.
 
I cant take in the sources (As u know some company polocies) from my home.
Can you please suggest me some thing or up load a tar ball as you said.
 
Thanks in Advance.
2009/12/4 Stuart Hughes <address@hidden>
Hi Naveen,

Forget ltib-6.2.2-sv it's way too old.

I just tried CVS, it's fine.  Are you at a company that blocks this port?  maybe you need a proxy? If so you'll need to talk to your IT department.  Failing that you could check-out from a another location (home) that isn't blocked.

If you can't do this, let me know and I'll try to get a new tarball uploaded that you can get to from a browser.


Regards, Stuart

Naveen Krishna Ch wrote:
Hi Stuart,

I was not able to checkout the CVS sources

address@hidden LTIB]$ cvs -d:pserver:address@hidden:/sources/ltib co ltib
cvs [checkout aborted]: connect to [cvs.sv.gnu.org <http://cvs.sv.gnu.org>]:2401 failed: Connection timed out


I m trying with  "ltib-6.2.2-sv" and have the same problem.
Reinstalled all the dependencies.  Still it is saying install/upgrade these packages.
My suspicion is 64bit packages on X86.

Installed:
 glibc-devel.x86_64 0:2.11-2           rpm-build.x86_64 0:4.7.1-6.fc12           zlib.i686 0:1.2.3-23.fc12           zlib.x86_64 0:1.2.3-23.fc12

Can you please put some light on this issue.
Thanks.

2009/12/2 Stuart Hughes <address@hidden <mailto:address@hidden>>


   Hi Naveen,

   Looking again at your earlier email I see that you're using
   ltib-8-1-2-sv.  There have been many changes since then (including
   package detection).   You need to get the latest from CVS and re-try.


   Regards, Stuart

   Naveen Krishna Ch wrote:

       Hi Stuart,

       2009/12/1 Stuart Hughes <address@hidden <mailto:address@hidden>
       <mailto:address@hidden <mailto:address@hidden>>>



          Hi Naveen,

          You need to install the missing packages (su yum install ...)


       I tried that, the system says they are installed at are at their
       latest versions.
        address@hidden ~]$ sudo yum install glibc-devel
       [sudo] password for chnaveen:
       Loaded plugins: presto, refresh-packagekit
       updates/metalink                                                                                                                                   | 5.8 kB     00:00    Setting up Install Process
       Package glibc-devel-2.11-2.x86_64 already installed and latest
       version
       Nothing to do
      address@hidden ~]$ sudo yum install rpm-build
       Loaded plugins: presto, refresh-packagekit
       Setting up Install Process
       Package rpm-build-4.7.1-6.fc12.x86_64 already installed and
       latest version
       Nothing to do
      address@hidden ~]$

       I have 64bit processor and 64Bit Fedora 12, Could this be a problem
       Am i missing anything,
       
          Regards, Stuart

          Naveen Krishna Ch wrote:

              Hi Folks,

              I brought in a new 64bit PC installed with Fedora 12
       64bit version.
              when i do ./ltib The build failed saying

              address@hidden Downloads]$ cd ltib-8-1-2-sv/
              address@hidden ltib-8-1-2-sv]$ ls
              bin  config  COPYING  CVS  dist  doc  ltib  README
               README-tarball.txt
              address@hidden ltib-8-1-2-sv]$ ./ltib

              ltib cannot be run because one or more of the host
       packages needed
              to run it are either missing or out of date.

              Please install/upgrade these packages and then re-try.

              Package                Minimum ver   Installed info
              -------                -----------   ---------------
              glibc-devel            0             not installed
              rpm-build              0             not installed
              Died at ./ltib line 1267.
              traceback:
               main::host_checks:1267
               main:480


              Started: Tue Dec  1 16:32:49 2009
              Ended:   Tue Dec  1 16:32:50 2009
              Elapsed: 1 seconds

              Build Failed

              Exiting on error or interrupt
              address@hidden ltib-8-1-2-sv]$

              I checked both the glibc and rpm are at their latest versions
              Is it a OS problem or any issue with the configuration.
              What am i missing, Appreciate if someone could help me
       with this.

              --        Shine bright,
              (: Naveen Krishna Ch :)


                    ------------------------------------------------------------------------

              _______________________________________________
              LTIB home page: http://ltib.org

              Ltib mailing list
              address@hidden <mailto:address@hidden>
       <mailto:address@hidden <mailto:address@hidden>>


              http://lists.nongnu.org/mailman/listinfo/ltib




       --        Shine bright,
       (: Naveen Krishna Ch :)




--
Shine bright,
(: Naveen Krishna Ch :)



--
Shine bright,
(: Naveen Krishna Ch :)

reply via email to

[Prev in Thread] Current Thread [Next in Thread]