RE: [Ltib] Qtopia 2

[Pierre-Luc Beaubien]

Hi Paolo,

I faced the same problem when I tried to build Qtopia for the PHY3250. No 
binaries are created even if the build is successfull... I only get the fonts 
folder.

I also have some problems building the more recent version of Qtopia.

Regards, Pierre-Luc

-----Message d'origine-----
De : address@hidden [mailto:address@hidden De la part de Stuart Hughes
Envoyé : 14 décembre 2009 05:26
À : Paolo Cremonese
Cc : address@hidden
Objet : Re: [Ltib] Qtopia 2

Hi Paolo,

It depends on platform, but that looks reasonable.  For the imx27 I 
have:  rpm/RPMS/arm/qtopia-2.2.0-1.arm.rpm

An extract of the output for the rpm query is:
$ rpm --root `pwd`/rootfs -ql qtopia

//etc
//etc/firstuse
//etc/rc.d
//etc/rc.d/init.d
//etc/rc.d/init.d/qtopia
//opt
//opt/Qtopia
//opt/Qtopia/apps
//opt/Qtopia/apps/Applications
//opt/Qtopia/apps/Applications/.directory
//opt/Qtopia/apps/Applications/addressbook.desktop
//opt/Qtopia/apps/Applications/calculator.desktop
.....
//opt/Qtopia/bin
//opt/Qtopia/bin/addressbook
//opt/Qtopia/bin/appearance
//opt/Qtopia/bin/appservices
//opt/Qtopia/bin/buttoneditor
//opt/Qtopia/bin/calculator
//opt/Qtopia/bin/camera
//opt/Qtopia/bin/clock
//opt/Qtopia/bin/datebook
//opt/Qtopia/bin/embeddedkonsole
....

I suspect you have build errors.  The qtopia build is nasty and so can 
fail undetected.

NOTE: I don't have either your platform or the imx27 so cannot test the 
actual rpm.

Regards, Stuart

Paolo Cremonese wrote:
> Hi Stuart,
> I'm sorry, but it does not change.
> the rpm is
> 
> 'pwd'/rpm/RPMS/arm/qtopia-2.2.0-1.arm.rpm
> 
> is it correct?
> 
> Best Regards,
> Paolo
> 
> On lun, 2009-12-14 at 08:45 +0000, Stuart Hughes wrote:
>> Hi Paolo,
>>
>> Make sure you have it enabled properly in the config system (./ltib -m 
>> config).  If it is, try force rebuilding with:
>> ./ltib -p qtopia -f
>>
>> Regards, Stuart
>>
>> Paolo Cremonese wrote:
>>> Hi Stuart,
>>> You are right.
>>> I follow your suggestion, and my rpm seems contains only fonts.
>>>
>>> How can I get the right one?
>>>
>>> Best regards,
>>> Paolo
>>>
>>> On ven, 2009-12-11 at 16:54 +0000, Stuart Hughes wrote:
>>>> Hi Paolo,
>>>>
>>>> Check the rpm has built and installed correctly:
>>>>
>>>> $ rpm --root `pwd`/rootfs -ql qtopia
>>>>
>>>> This will list the installed files/directories for that package.
>>>>
>>>> Regards, Stuart
>>>>
>>>> Paolo Cremonese wrote:
>>>>> Hi All,
>>>>> I have configured my image (phy3250) with Qtopia 2 package:
>>>>> The image building is successfully, but on running the following message
>>>>> is printed on the console:
>>>>>
>>>>> /etc/rc.d/init.d/qtopia: line 55: cd: /opt/Qtopia/bin: No such file or
>>>>> directory
>>>>>
>>>>> In fact, in the /opt/Qtopia theare isn't any bin dir, only a lib dir
>>>>> containing fonts.
>>>>>
>>>>> Any suggestion?
>>>>>
>>>>> Thanks in advance,
>>>>> Paolo
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> LTIB home page: http://ltib.org
>>>>>
>>>>> Ltib mailing list
>>>>> address@hidden
>>>>> http://lists.nongnu.org/mailman/listinfo/ltib
>>>>>
>>>
> 
> 


_______________________________________________
LTIB home page: http://ltib.org

Ltib mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/ltib