Re: FC12 install problem (was Re: [Ltib] LTIB installation problem)

[Stuart Hughes]

Hi Shila/all,

I've checked-in an update to LTIB which fixes the install problem on FC12.

For people with existing BSPs please use the work-around below to fix
the problem (execstack -c).

Regards, Stuart

Stuart Hughes wrote:
> Hi Shila,
> 
> I looked into this a bit more and I think the problem is with SELINUX
> (or a violation by rpm in LTIB).  Did you get any alerts about
> librpmio-4.0.4.so?
> 
> Can you try this as root:
> 
> For an Savannah (public) LTIB:
> # execstack -c /opt/ltib/usr/lib/librpmio-4.0.4.so
> 
> For Freescale BSPs (please verify the library path):
> # execstack -c /opt/freescale/ltib/usr/lib/librpmio-4.0.4.so
> 
> After that go back to your normal user and re-try running LTIB.
> 
> Regards, Stuart
> 
> 
> Shila Haque wrote:
>> Hi Stuart,
>>
>> I really appreciated your help. I checked the host_config.log (I sent
>> this in my earlier email) and got the following: 
>>
>> Processing platform: Host support packages
>> ============================================
>> using
>> /home/hwtesting/ltib-p2020ds-20091119/config/platform/host/ltib.preconfi
>> g
>>
>> Processing: fake-provides
>> ===========================
>> Build path taken because: no prebuilt rpm,
>>
>> rpmbuild --dbpath ///opt/freescale/ltib/var/lib/rpm --target i686
>> --define '_unpackaged_files_terminate_build 0' --define '_target_cpu
>> i686' --define '__strip strip' --define '_topdir
>> /opt/freescale/ltib/usr/src/rpm' --define '_prefix
>> /opt/freescale/ltib/usr' --define '_tmppath
>> /home/hwtesting/ltib-p2020ds-20091119/tmp' --define '_rpmdir
>> /opt/freescale/ltib/usr/src/rpm/RPMS'  --define '_mandir
>> /opt/freescale/ltib/usr/share/man' --define '_sysconfdir
>> /opt/freescale/ltib/etc' --define '_localstatedir /var' -bb --clean
>> --rmsource
>> /home/hwtesting/ltib-p2020ds-20091119/dist/lfs-5.1/fake-provides/fake-pr
>> ovides.spec
>>
>> Failed building fake-provides
>> Died at ./ltib line 1380.
>> traceback:
>>  main::build_host_rpms:1380
>>   main::host_checks:1435
>>    main:542
>>
>>
>> Started: Tue Apr  6 09:10:15 2010
>> Ended:   Tue Apr  6 09:10:16 2010
>> Elapsed: 1 seconds
>>
>> These packages failed to build:
>> fake-provides
>>
>> Build Failed
>>
>>
>>
>> Thanks,
>>
>> Shila
>>
>> -----Original Message-----
>> From: Stuart Hughes [mailto:address@hidden 
>> Sent: Tuesday, April 06, 2010 9:57 AM
>> To: Shila Haque
>> Cc: address@hidden
>> Subject: Re: [Ltib] LTIB installation problem
>>
>> Hi Shila,
>>
>> I can't tell from your output what is wrong.  I've not tried FC12 with
>> the latest LTIB and I don't have the version you are using.
>>
>> Is that all the output? can you send me the actual host_config.log off
>> the list.  I'm not sure I can help though as the version you have is not
>> the one I maintain.
>>
>> Regards, Stuart
>>
>>
>> Shila Haque wrote:
>>> Hi Stuart,
>>>
>>> Thanks a lot for your reply. 
>>>
>>> I checked again the bin/Ltibutils.pm and found it looks like the same
>> as
>>> mention.
>>>
>>> Then I did the following:
>>> First, I removed the 2>/dev/null from the 'rpm-build' line and then
>> run.
>>> But I got the same error as rpm-build 0 failed.
>>> Then I commented out the line " rpm-build 0" at line 94 in ltib and
>> run
>>> and got the following error:
>>>
>>> address@hidden ltib-p2020ds-20091119]$ ./ltib
>>>
>>> Installing host support packages.
>>>
>>> This only needs to be done once per host, but may take up to
>>> an hour to complete ...
>>>
>>> If an error occurs, a log file with the full output may be found in:
>>> /home/hwtesting/ltib-p2020ds-20091119/host_config.log
>>>
>>> Exiting on error or interrupt
>>> Please see >> /home/hwtesting/ltib-p2020ds-20091119/host_config.log
>> for
>>> details
>>> address@hidden ltib-p2020ds-20091119]$
>>>
>>>
>>>
>>> I checked the host_config.log and got the following:
>>>
>>>
>>>
>>> Processing platform: Host support packages
>>> ============================================
>>> using
>>>
>> /home/hwtesting/ltib-p2020ds-20091119/config/platform/host/ltib.preconfi
>>> g
>>>
>>> Processing: fake-provides
>>> ===========================
>>> Build path taken because: no prebuilt rpm,
>>>
>>> rpmbuild --dbpath ///opt/freescale/ltib/var/lib/rpm --target i686
>>> --define '_unpackaged_files_terminate_build 0' --define '_target_cpu
>>> i686' --define '__strip strip' --define '_topdir
>>> /opt/freescale/ltib/usr/src/rpm' --define '_prefix
>>> /opt/freescale/ltib/usr' --define '_tmppath
>>> /home/hwtesting/ltib-p2020ds-20091119/tmp' --define '_rpmdir
>>> /opt/freescale/ltib/usr/src/rpm/RPMS'  --define '_mandir
>>> /opt/freescale/ltib/usr/share/man' --define '_sysconfdir
>>> /opt/freescale/ltib/etc' --define '_localstatedir /var' -bb --clean
>>> --rmsource
>>>
>> /home/hwtesting/ltib-p2020ds-20091119/dist/lfs-5.1/fake-provides/fake-pr
>>> ovides.spec
>>>
>>> Failed building fake-provides
>>> Died at ./ltib line 1380.
>>> traceback:
>>>  main::build_host_rpms:1380
>>>   main::host_checks:1435
>>>    main:542
>>>
>>>
>>> Started: Tue Apr  6 09:10:15 2010
>>> Ended:   Tue Apr  6 09:10:16 2010
>>> Elapsed: 1 seconds
>>>
>>> These packages failed to build:
>>> fake-provides
>>>
>>> Build Failed
>>>
>>>
>>> I really appreciated your help.
>>>
>>> Thanks,
>>>
>>> Shila
>>>
>>>
>>>
> 
> 
> _______________________________________________
> LTIB home page: http://ltib.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib
>