Re: [Ltib] How to include kernel headers (phy3250)?

[Stuart Hughes]

Hi Lukasz,

Looks like this was recently updated.  Please make sure you have this
patch (cvs up if you're using cvs):
http://cvs.savannah.gnu.org/viewvc/ltib/config/platform/phy3250/main.lkc?root=ltib&r1=1.4&r2=1.5

Regards, Stuart

Lukasz Gesieniec wrote:
> Hi Stuart,
> 
> I can't see this option. My screen looks like this:
> 
>                  --- Choose your Kernel
>                      kernel (Linux 2.6.27.8 for LPC3250/Phytec 3250)  --->
>                  [*] Always rebuild the kernel
>                  [ ] Produce cscope index
>                   (linux-2.6.27.8-phy3250.config) Kernel preconfig
>                   [*] Configure the kernel
>                   --- Leave the kernel sources after building
>                   --- Package selection
> Regards,
> Lukasz
> 
> 
> Dnia 14-04-2010 o 10:16:24 Stuart Hughes <address@hidden> napisał(a):
> 
>> Hi Lukasz,
>>
>> Run ./ltib -m config and enable the option "Include kernel headers" and
>> then run ./ltib.  It's on them opening page just after the kernel config
>> file option. I don't have that BSP configured, but the one I have looks
>> like this:
>>
>> ...
>> (mpc834x_itxgp_defconfig) kernel config file
>> [*] Include kernel headers
>> [ ] Configure the kernel
>> ....
>>
>> Regards, Stuart
>>
>> Lukasz Gesieniec wrote:
>>>
>>> Hello,
>>>
>>> I'm working with LTIB and phy3250 board. I do not see the option to
>>> Include kernel headers.
>>> Compiling DirectFB causes the following error:
>>>
>>>
>>> + [ ! -f
>>> /home/lukaszge/ltib/rootfs/usr/src/linux/include/linux/autoconf.h ]
>>> + cat
>>>
>>> No file:
>>> /home/lukaszge/ltib/rootfs/usr/src/linux/include/linux/autoconf.h
>>>
>>> You need to build the kernel and have 'Include kernel headers' set
>>> to build this package
>>>
>>> + exit 1
>>> error: Bad exit status from /home/lukaszge/ltib/tmp/rpm-tmp.47635
>>> (%build)
>>>
>>>
>>> RPM build errors:
>>>     Bad exit status from /home/lukaszge/ltib/tmp/rpm-tmp.47635 (%build)
>>> Build time for DirectFB: 0 seconds
>>>
>>> Failed building DirectFB
>>>
>>> Regards,
>>> Lukasz
>>>
>>>
> 
>