Re: [Ltib] error while compiling pango-1.20 and gtk+-2.18 by ltib

[Stuart Hughes]

The version of gtk2 in Savannah LTIB is 2.12.1, so I don't know.  Looks
like it needs a patch or an ac_cv_....=no to fix this.  Where did you
get this BSP?  maybe they can help.

Regards, Stuart

super spirit wrote:
> Hi all, i am tryng to compile gtk+-2.18 , pango-1.20.2 with cairo-1.6.
> the error i am getting is
> " checking if gio can sniff png... configure: error: in
> `/home/irode/ltib/rpm/BUILD/gtk+-2.18.7':
> configure: error: cannot run test program while cross compiling. ".
> i am listing part of log file, pls have a look. people can u suggest me
> a wht might be the problem.
> 
> thanks
> 
> =========================================================
> + cd pango-1.20.2
> + rm -rf /home/irode/ltib/tmp/pango
> + exit 0
> Executing(--clean): /bin/sh -e /home/irode/ltib/tmp/rpm-tmp.19554
> + umask 022
> + cd /home/irode/ltib/rpm/BUILD
> + rm -rf pango-1.20.2
> + exit 0
> Build time for pango: 101 seconds
> 
> sudo /opt/ltib/usr/bin/rpm --root /home/irode/ltib/rootfs --dbpath
> /var/lib/rpm -e --allmatches --nodeps --noscripts --define '_tmppath
> /tmp/ltib' pango 2>/dev/null
> sudo /opt/ltib/usr/bin/rpm --root /home/irode/ltib/rootfs --dbpath
> /var/lib/rpm --prefix / --ignorearch -ivh --force --excludedocs
> --noscripts --define '_tmppath /tmp/ltib'
> /home/irode/ltib/rpm/RPMS/arm/pango-1.20.2-1.arm.rpm
> Preparing...                ###########################################
> [100%]
>    1:pango                  ###########################################
> [100%]
> 
> Processing: gtk2
> ==================
> Build path taken because: directory build, no prebuilt rpm,
> scbuild/scdeploy already unpacked package
> 
> Processing: gtk2
> ==================
> Build path taken because: directory build, build key set, no prebuilt rpm,
> 
> rpmbuild --dbpath /home/irode/ltib/rootfs//var/lib/rpm --target arm
> --define '_unpackaged_files_terminate_build 0' --define '_target_cpu
> arm' --define '__strip strip' --define '_topdir /home/irode/ltib/rpm'
> --define '_prefix /usr' --define '_tmppath /home/irode/ltib/tmp'
> --define '_rpmdir /home/irode/ltib/rpm/RPMS'  --define '_mandir
> /usr/share/man' --define '_sysconfdir /etc' --define '_localstatedir
> /var' -bc --short-circuit  /home/irode/ltib/dist/lfs-5.1/gtk2/gtk2.spec
> Building target platforms: arm
> Building for target arm
> Executing(%build): /bin/sh -e /home/irode/ltib/tmp/rpm-tmp.26460
> + umask 022
> + cd /home/irode/ltib/rpm/BUILD
> + cd gtk+-2.18.7
> ...
> ..
> .
> checking for libpng12... yes
> checking pixbuf loaders to build...
> checking if gio can sniff png... configure: error: in
> `/home/irode/ltib/rpm/BUILD/gtk+-2.18.7':
> configure: error: cannot run test program while cross compiling
> See `config.log' for more details.
> error: Bad exit status from /home/irode/ltib/tmp/rpm-tmp.26460 (%build)
> ..
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> LTIB home page: http://ltib.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib