[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Ltib] mconf error
From: |
Wiekierak, Michael (STP) |
Subject: |
RE: [Ltib] mconf error |
Date: |
Tue, 22 Jun 2010 15:09:20 -0500 |
My version of LTIB is from Freescale (L2.6.31_09.12.00_SDK_source.tar.gz).
This is my initial install of LTIB on this machine.
Before I received your answer Stuart, I was searching the web and I found a
Ubuntu specific problem that was fixed with the line:
$cmd .= "--force-debian " if $rpm =~ m/rpm-fs/ && `uname -a` =~ m/ubuntu/i;
added to the ltib script after line 929.
Then I prerformed an "./ltib -m distclean", then started the LTIB build again,
It is currently in the process of building now. I'll post again if it doesn't
succeed, but it looks as if its on the way.
Thanks,
Mike
-----Original Message-----
From: Stuart Hughes [mailto:address@hidden
Sent: Tuesday, June 22, 2010 2:31 PM
To: Wiekierak, Michael (STP)
Cc: address@hidden
Subject: Re: [Ltib] (no subject)
Hi Mike,
Which version of LTIB is this (e.g. from Savannah or Freescale?) Is this the
first time anyone on this machine has run ltib, or has it started to fail?
When LTIB is first run, it builds a bunch of host support packages which it
puts in /opt/ltib/usr/bin (or for freescsale /opt/freescale/usr/bin IIRC). One
such package is lkc, which provides mconf. This path is added into LTIB build
environment, so it should be found if it's there.
Can you check to see if you /opt/{ltib,freescale} area contains this, for
example my host has:
...
libtool*
libtoolize*
makeinfo*
mconf*
mkfs.cramfs*
mkfs.jffs*
mkfs.jffs2*
...
Regards, Stuart
Wiekierak, Michael (STP) wrote:
> Running the initial instance of ./ltib I get this error:
>
> Can't exec "mconf": No such file or directory at
> /home/boston/ltib/ltib/bin/Ltibutils.pm line 972.
> exec: mconf /home/boston/ltib/ltib/config/main.lkc: No such file or
> directory at /home/boston/ltib/ltib/bin/Ltibutils.pm line 972.
> traceback:
> Ltibutils::system_nb:972
> main::get_plat_dir:2948
> main:548
>
>
> Started: Tue Jun 22 13:52:48 2010
> Ended: Tue Jun 22 13:52:48 2010
> Elapsed: 0 seconds
>
>
> Build Failed
>
> Exiting on error or interrupt
> Died at ./ltib line 2948.
> traceback:
> main::get_plat_dir:2948
> main:548
>
>
>
> I don't have the file mconf. I'm running on Ubuntu 10.04. Any idea?
>
> Thanks
>
> Mike
>
>
>
> ----------------------------------------------------------------------
> --
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib