[Ltib] RE: Stuck at "...booting the kernel"

[Kevin Wells]

Hi Nishanth,

 

Build your kernel image with the CONFIG_DEBUG_LL option to get an idea why it’s hanging

on startup. The most likely cause is that the kernel doesn’t have a matching machine ID

that the boot loader requests.

 

Kevin

 

From: address@hidden [mailto:address@hidden On Behalf Of Nishanth Satyanarayana
Sent: Monday, December 06, 2010 5:01 PM
To: address@hidden
Subject: [Ltib] Stuck at "...booting the kernel"

 

Hello,

 

I’m running ltib on lpc 3250 board, and on boot, the process gets stuck after the linux kernel has been read from USB flash drive.  Any ideas on how to proceed?

 

Thanks,

Nish

 

 

Kickstart bootloader started...

Detected NAND Flash ID is: f1ec

Kickstart: reading application data

Kickstart: starting application

 

Embedded Artists LPC3250 board

Build date: Nov 28 2009 16:10:47

Autoboot in progress, press any key to stop

 

 

U-Boot 2009.03-rc1 (Sep 07 2010 - 12:05:35)

 

DRAM:  64 MB

NAND:  128 MiB

In:    serial

Out:   serial

Err:   serial

Hit any key to stop autoboot:  0

(Re)start USB...

USB:

ISP1301 Vendor ID  : 0x04cc

ISP1301 Product ID : 0x1301

ISP1301 Version ID : 0x0210

scanning bus for devices... 2 USB Device(s) found

       scanning bus for storage devices... 1 Storage Device(s) found

reading uImage

................................................................................

..........................................................................

 

1584624 bytes read

stopping USB..

## Booting kernel from Legacy Image at 80100000 ...

   Image Name:   Linux-2.6.27.8

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    1584560 Bytes =  1.5 MB

   Load Address: 80008000

   Entry Point:  80008000

   Verifying Checksum ... OK

   Loading Kernel Image ... OK

OK

 

Starting kernel ...

 

Uncompressing Linux.............................................................

...................... done, booting the kernel.