ltib
[Top][All Lists]
Advanced
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Ri.: Re: [Ltib] Build error fotr packages related to X11

From: Enrico Miglino
Subject: Ri.: Re: [Ltib] Build error fotr packages related to X11
Date: Tue, 14 Dec 2010 21:20:38 +0100 
Thank you very much, Stuart.
After my last re-installation I'm proceeding step by step adding components. I 
wrote "related to X11" because as I set X11 a compilation problem occours. Now 
I'm following your advice, with a component at a time. I don't forgotten to set 
X11 but my screen is slightly different from yours. I have only the option for 
Xorg 7.x or "not install X11" Now I'm recompiling with xorg activated. If there 
are other problems I send you a snapshot of my configuration page. Is possible 
that my tar version is not the latest or is wrong ? I downloaded the last file 
in the savannah site.

thanks again. Enrico




> ----- Messaggio originale -----  
> Da: "Stuart Hughes‎" <address@hidden> 
> A: "Enrico Miglino‎" <address@hidden> 
> cc: address@hidden 
> Oggetto: Re: [Ltib] Build error fotr packages related to X11 
> Data: Tue, 14 Dec 2010 19:51:11 +0000 
>  
>  
>Hi Enrico, 
>  
> Run ./ltib  --config and navigate to: 
>  
> Package list  --->  X11  ---> 
>  
> Make sure "Install X11" is set.  I've attached a screen dump to show this. 
>  
> Regards, Stuart 
>  
>  
> Enrico Miglino wrote: 
> > Hi to all 
> > 
> > I create another fresh ltib install, and started again! After  
> > platform setting (EA3250) I set a minimal configuration for linux  
> > and proceeded to build. 
> > 
> > After all the process, up to an hour, ltib build stops  with the  
> > fololowing message: 
> > 
> > I left a lot of defaults and changed only the indispensable, but  
> > the error remain. Now I try to build with --continue, but it seems  
> > a nonsense... The idea I have is that something is omitted, or is  
> > wrong. I already changed permissions in ubuntu 10.04 for /opt  
> > directory, I'm ignoring the error about .gvfs directory  
> > permissions, but I can't compile. 
> > 
> > Thanks, Enrico 
> > 
> > ========================== 
> > checking for X... configure: error: Package requirements (x11) were not 
> > met: 
> > 
> > No package 'x11' found 
> > 
> > Consider adjusting the PKG_CONFIG_PATH environment variable if you 
> > installed software in a non-standard prefix. 
> > 
> > Alternatively, you may set the environment variables X_CFLAGS 
> > and X_LIBS to avoid the need to call pkg-config. 
> > See the pkg-config man page for more details. 
> > 
> > error: Bad exit status from  
> > /home/enrico/ltib/EA3250/tmp/rpm-tmp.74359 (%build) 
> > 
> > 
> > RPM build errors: 
> >     Bad exit status from /home/enrico/ltib/EA3250/tmp/rpm-tmp.74359 
> > (%build) 
> > Build time for libXrender: 16 seconds 
> > 
> > Failed building libXrender 
> > 
> > 
> > f_buildrpms() returned an error, exiting 
> > traceback: 
> >  main:561 
> > 
> > 
> > Started: Tue Dec 14 18:03:17 2010 
> > Ended:   Tue Dec 14 19:38:50 2010 
> > Elapsed: 5733 seconds 
> > 
> > These packages failed to build: 
> > libXrender Build Failed 
> > 
> > Exiting on error or interrupt 
> > ============================================ 
> > 
> > 
> > 
> > 
> >> ----- Messaggio originale ----- Da: "Enrico Miglino‎"  
> >> <address@hidden> 
> >> A: address@hidden 
> >> cc: address@hidden 
> >> Oggetto: Ri.: Re: Ri.: Re: Ri.: Re: [Ltib] RPB Build error fotr  
> >> packages   related to X11 
> >> Data: Tue, 14 Dec 2010 14:40:11 +0100 
> >> 
> >> 
> >> Hi, Stuart. Strange, eh??? 
> >> 
> >> Sure. I try to explain more clear: 
> >> 
> >> 1) install ltib, set in the initial configuration EA3250 platform,  
> >> compile. I obtain an uImage that starts then loading the kernel,  
> >> after the display of the penguin logo image on the EA3250 screen  
> >> the console shows kernel panic. I don't matter, thinking that a  
> >> lot of things are missing. 
> >> 
> >> 2) start ./ltib -m configure (or --configure is the same), set  
> >> usb, peripherals etc. At this point what I expect is that the  
> >> kernel compile. With run-time errors, other panic or more  
> >> depending on the correctness of my configuration (I set also the  
> >> kernel drivers and parameters accordingly with the paltform  
> >> hardware). 
> >> At this point, nothing works. Everytime I compile I obtain errors  
> >> on rpm, different depending by the configuration. And I can't  
> >> focus wht is the point. 
> >> 
> >> The only solution I can imagine is: remove all again, reinstall  
> >> ltib, create the initial configuration and try to setup one thing  
> >> at a time, but I think maybe some other wrong that i don't know... 
> >> 
> >> Enrico 
> >> 
> >> 
> >> 
> >> 
> >>> ----- Messaggio originale ----- Da: address@hidden 
> >>> A: "Enrico Miglino‎" <address@hidden> 
> >>> cc: "Stuart Hughes‎" <address@hidden>, address@hidden 
> >>> Oggetto: Re: Ri.: Re: Ri.: Re: [Ltib] RPB Build error fotr  
> >>> packages related  to X11 
> >>> Data: Tue, 14 Dec 2010 08:19:20 -0500 
> >>> 
> >>> 
> >>> Hi Enrico, 
> >>> 
> >>> I'm not quite sure I understand. 
> >>> 
> >>> Are you saying that the build is okay if you use the default kernel 
> >>> configuration, but it fails if you change the kernel configuration? 
> >>> 
> >>> Regards, Stuart 
> >>> 
> >>> 
> >>>> Hi Stuart, 
> >>>> 
> >>>> In these days I removed the linux* directory from rpm/BUILD as you 
> >>>> suggested, and the whole build restarted. 
> >>>> Immediately after I downloaded ltib (after installation) I tried to 
> >>>> compile a uImage only indicating the platform EA3250 and leaving all the 
> >>>> default values. 
> >>>> The toolchain generated an image that starts showing the linux penguin 
> >>>> on 
> >>>> the EA3250 screen but in console what appear is a "starting kernel" then 
> >>>> a 
> >>>> "kernel panic" message and all stops. 
> >>>> 
> >>>> Ok, It seems me obvious. I configured the kernel with the needed 
> >>>> components and restarted a build. After the problem I tried to solve as 
> >>>> you suggested and now after my last configuration compile starts and 
> >>>> create and error. I tried several ways, but if I configure the board the 
> >>>> compilation never complete. I have no difficult to download again ltib 
> >>>> and 
> >>>> reinstall, but I think I'm doing something incorrect or miss some 
> >>>> passage 
> >>>> or parameter... 
> >>>> 
> >>>> The ltib tar copy I'm using to startup is the file 
> >>>> ltib-10-1-1a-sv.tar.gz 
> >>>> 
> >>>> Thank you for your support. 
> >>>> Enrico 
> >>>> 
> >>>> 
> >>>> 
> >>>> 
> >>>>> ----- Messaggio originale ----- 
> >>>>> Da: "Stuart Hughes‎" <address@hidden> 
> >>>>> A: "Enrico Miglino‎" <address@hidden> 
> >>>>> Oggetto: Re: Ri.: Re: [Ltib] RPB Build error fotr packages related to 
> >>>>> X11 
> >>>>> Data: Fri, 10 Dec 2010 18:21:25 +0000 
> >>>>> 
> >>>>> 
> >>>>> Hi Enrico, 
> >>>>> 
> >>>>> Please keep emails on the list. 
> >>>>> 
> >>>>> It looks as though your kernel sources may be incomplete.  Provided 
> >>>>> you've not been working on the kernel, remove rpm/BUILD/linux* and 
> >>>>> re-try. 
> >>>>> 
> >>>>> Regards, Stuart 
> >>>>> 
> >>>>> 
> >>>>> Enrico Miglino wrote: 
> >>>>>> Hi Stuart, here follows the output of my last ./ltib build (without 
> >>>>>> --continue) 
> >>>>>> 
> >>>>>> I also checked gcc in ltib shell mode, and it seems ok. 
> >>>>>> 
> >>>>>> ========================================== 
> >>>>>> LTIB> gcc -v 
> >>>>>> Using built-in specs. 
> >>>>>> Target: arm-none-linux-gnueabi 
> >>>>>> Configured with: 
> >>>>>> /usr/src/redhat/BUILD/cross-mlib/source/gcc-4.1.2/configure 
> >>>>>> --target=arm-none-linux-gnueabi --host=i686-host_pc-linux-gnu 
> >>> --prefix=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi
> >>>  
> >>> --with-sysroot=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/arm-none-linux-gnueabi/sysroot
> >>>  
> >>>>> --enable-threads --enable-shared --disable-libssp --disable-libgomp 
> >>>>> --disable-libmudflap --enable-languages=c,c++ --enable-__cxa_atexit 
> >>>>>> --disable-nls 
> >>>>>> Thread model: posix 
> >>>>>> gcc version 4.1.2 
> >>>>>> ========================================== 
> >>>>>> 
> >>>>>> 
> >>>>>> BUILD CONSOLE OUTPUT: 
> >>>>>> 
> >>>>>> 
> >>>>>> Processing platform: Embedded Artists LPC3250 OEM Board with the 
> >>>>>> NXP LPC32XX SoC 
> >>> ==================================================================================
> >>>  
> >>>>>> using config/platform/ea3250/.config 
> >>>>>> PKG_KERNEL_WANT_CF has changed, kernel-2.6.27.8-lpc32xx needs a 
> >>>>> rebuild 
> >>>>>> PKG_KERNEL_LEAVESRC has changed, kernel-2.6.27.8-lpc32xx needs a 
> >>>>> rebuild 
> >>>>>> Processing: fake-provides 
> >>>>>> =========================== 
> >>>>>> Build path taken because: no prebuilt rpm, rpmbuild --dbpath 
> >>>>>> /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define 
> >>>>>> '_unpackaged_files_terminate_build 0' --define '_target_cpu arm' 
> >>>>>> --define '__strip strip' --define '_topdir 
> >>>>>> /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define 
> >>>>>> '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir 
> >>>>>> /home/enrico/ltib/EA3250/rpm/RPMS'  --define '_mandir 
> >>>>>> /usr/share/man' --define '_sysconfdir /etc' --define 
> >>>>>> '_localstatedir /var' -bb --clean --rmsource 
> >>>>>> /home/enrico/ltib/EA3250/dist/lfs-5.1/fake-provides/fake-provides.spec 
> >>>>>> Building target platforms: arm 
> >>>>>> Building for target arm 
> >>>>>> Executing(%prep): /bin/sh -e 
> >>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301 
> >>>>>> + umask 022 
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD 
> >>>>>> + exit 0 
> >>>>>> Executing(%build): /bin/sh -e 
> >>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301 
> >>>>>> + umask 022 
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD 
> >>>>>> + exit 0 
> >>>>>> Executing(%install): /bin/sh -e 
> >>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301 
> >>>>>> + umask 022 
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD 
> >>>>>> + rm -rf /tmp/fake-provides-1.0 
> >>>>>> Processing files: fake-provides-1.0-5 
> >>>>>> Provides: /bin/sh /bin/bash /bin/csh /bin/tcsh /usr/bin/env 
> >>>>>> /usr/bin/perl /usr/local/bin/perl libgcc_s.so.1 
> >>>>>> libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GLIBC_2.0) /bin/gawk 
> >>>>>> /usr/bin/nawk /usr/bin/awk /usr/bin/bash perl 5.8.0 
> >>>>>> perl(Getopt::Long) perl(Getopt::Std) perl(constant) 
> >>>>>> perl(getopts.pl) perl(strict) perl(vars) perl(Carp) perl(Cwd) 
> >>>>>> perl(Data::Dumper) perl(DynaLoader) perl(Exporter) 
> >>>>>> perl(File::Basename) perl(File::Compare) perl(File::Copy) 
> >>>>>> perl(File::Find) perl(File::Spec) perl(File::stat) perl(IO::File) 
> >>>>>> perl(POSIX) perl(Text::ParseWords) libstdc++.so.5 
> >>>>>> libstdc++.so.5(CXXABI_1.2) libstdc++.so.5(GLIBCPP_3.2) 
> >>>>>> libstdc++.so.5(GLIBCPP_3.2.1) /bin/rm /sbin/ldconfig 
> >>>>>> /sbin/chkconfig linux-gate.so.1 
> >>>>>> PreReq: rpmlib(PayloadFilesHavePrefix) <= 4.0-1 
> >>>>>> rpmlib(CompressedFileNames) <= 3.0.4-1 
> >>>>>> Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 
> >>>>>> rpmlib(CompressedFileNames) <= 3.0.4-1 
> >>>>>> Wrote: 
> >>>>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/fake-provides-1.0-5.arm.rpm 
> >>>>>> Executing(%clean): /bin/sh -e 
> >>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301 
> >>>>>> + umask 022 
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD 
> >>>>>> + rm -rf /tmp/fake-provides-1.0 
> >>>>>> + exit 0 
> >>>>>> Executing(--clean): /bin/sh -e 
> >>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.15363 
> >>>>>> + umask 022 
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD 
> >>>>>> + exit 0 
> >>>>>> Build time for fake-provides: 1 seconds 
> >>>>>> 
> >>>>>> sudo /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs 
> >>>>>> --dbpath /var/lib/rpm -e --allmatches --nodeps --noscripts --define 
> >>>>>> '_tmppath /tmp/ltib' fake-provides 2>/dev/null 
> >>>>>> sudo /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs 
> >>>>>> --dbpath /var/lib/rpm --prefix / --ignorearch -ivh --force 
> >>>>>> --excludedocs --noscripts --define '_tmppath /tmp/ltib' 
> >>>>>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/fake-provides-1.0-5.arm.rpm 
> >>>>>> error: failed to stat /home/enrico/.gvfs: Permission denied 
> >>>>>> Preparing... 
> >>>>>> ########################################### [100%] 
> >>>>>> 
> >>>>>> Processing: kernel-2.6.27.8-lpc32xx 
> >>>>>> ===================================== 
> >>>>>> Build path taken because: directory build, build key set, no 
> >>>>>> prebuilt rpm, scbuild/scdeploy already unpacked package 
> >>>>>> 
> >>>>>> Processing: kernel-2.6.27.8-lpc32xx 
> >>>>>> ===================================== 
> >>>>>> Build path taken because: directory build, build key set, no 
> >>>>>> prebuilt rpm, rpmbuild --dbpath 
> >>>>>> /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define 
> >>>>>> '_unpackaged_files_terminate_build 0' --define '_target_cpu arm' 
> >>>>>> --define '__strip strip' --define '_topdir 
> >>>>>> /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define 
> >>>>>> '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir 
> >>>>>> /home/enrico/ltib/EA3250/rpm/RPMS'  --define '_mandir 
> >>>>>> /usr/share/man' --define '_sysconfdir /etc' --define 
> >>>>>> '_localstatedir /var' -bc --short-circuit 
> >>>>>> /home/enrico/ltib/EA3250/tmp/kernel-2.6.27.8-lpc32xx.spec 
> >>>>>> Building target platforms: arm 
> >>>>>> Building for target arm 
> >>>>>> Executing(%build): /bin/sh -e 
> >>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652 
> >>>>>> + umask 022 
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD 
> >>>>>> + cd linux-2.6.27.8 
> >>>>>> + eval echo 
> >>>>>> + echo 
> >>>>>> + PKG_KERNEL_PATH_PRECONFIG= 
> >>>>>> + eval echo 
> >>>>>> + echo 
> >>>>>> + PKG_KERNEL_KBUILD_PRECONFIG= 
> >>>>>> + eval echo linux-2.6.27.8-ea3250.config 
> >>>>>> + echo linux-2.6.27.8-ea3250.config 
> >>>>>> + PKG_KERNEL_PRECONFIG=linux-2.6.27.8-ea3250.config 
> >>>>>> + KSRC_DIR=/home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8 
> >>>>>> + : arm 
> >>>>>> + : ccache /usr/bin/gcc -B/usr/bin// 
> >>>>>> + : linux-2.6.27.8-ea3250.config 
> >>>>>> + : /home/enrico/ltib/EA3250/config/platform/ea3250 
> >>>>>> + : /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8 
> >>>>>> + rm -f /home/enrico/ltib/EA3250/rpm/BUILD/linux 
> >>>>>> + ln -s /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8 
> >>>>>> /home/enrico/ltib/EA3250/rpm/BUILD/linux 
> >>>>>> + cd /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8 
> >>>>>> + KBOUT= 
> >>>>>> + [ -n  -a  != . ] 
> >>>>>> + KBOUT=. 
> >>>>>> + KTARG=zImage 
> >>>>>> + SYSCFG_KTARG=uImage 
> >>>>>> + [ linux-2.6.27.8-ea3250.config = defconfig ] 
> >>>>>> + [ -f 
> >>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config.dev
> >>>  
> >>>>>> ] 
> >>>>>> + [ -f 
> >>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
> >>>  
> >>>>>> ] 
> >>>>>> + 
> >>> CFG_PATH=/home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
> >>>  
> >>>>>> + break 
> >>>>>> + [ -z 
> >>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
> >>>  
> >>>>>> ] 
> >>>>>> + [ arm = ppc -a -f arch/powerpc/Kconfig ] 
> >>>>>> + [ -n  ] 
> >>>>>> + [ -n 
> >>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
> >>>  
> >>>>>> ] 
> >>>>>> + cp -f 
> >>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
> >>>  
> >>>>>> ./.config 
> >>>>>> + [ -z  -a -n  -o -n  ] 
> >>>>>> + [ -n 
> >>> /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
> >>>  
> >>>>>> ] 
> >>>>>> + make ARCH=arm HOSTCC=ccache /usr/bin/gcc -B/usr/bin// oldconfig 
> >>>>>> + yes make: *** No rule to make target `oldconfig'.  Stop. 
> >>>>>> error: Bad exit status from 
> >>>>>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652 (%build) 
> >>>>>> 
> >>>>>> 
> >>>>>> RPM build errors: 
> >>>>>>     Bad exit status from /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652 
> >>>>> (%build) 
> >>>>>> Build time for kernel-2.6.27.8-lpc32xx: 0 seconds 
> >>>>>> 
> >>>>>> Failed building kernel-2.6.27.8-lpc32xx 
> >>>>>> 
> >>>>>> 
> >>>>>> f_buildrpms() returned an error, exiting 
> >>>>>> traceback: 
> >>>>>>  main:561 
> >>>>>> 
> >>>>>> 
> >>>>>> Started: Fri Dec 10 15:07:17 2010 
> >>>>>> Ended:   Fri Dec 10 15:07:36 2010 
> >>>>>> Elapsed: 19 seconds 
> >>>>>> 
> >>>>>> These packages failed to build: 
> >>>>>> kernel-2.6.27.8-lpc32xx Build Failed 
> >>>>>> 
> >>>>>> Exiting on error or interrupt 
> >>>>>> address@hidden:~/ltib/EA3250$ 
> >>>>>>> ----- Messaggio originale ----- Da: "Stuart Hughes‎" <address@hidden> 
> >>>>>>> A: "Enrico Miglino‎" <address@hidden> 
> >>>>>>> cc: address@hidden 
> >>>>>>> Oggetto: Re: [Ltib] RPB Build error fotr packages related to X11 
> >>>>>>> Data: Fri, 10 Dec 2010 12:47:01 +0000 
> >>>>>>> 
> >>>>>>> 
> >>>>>>> Hi Enrico, 
> >>>>>>> 
> >>>>>>> If base_libs fails then any dependent fail. 
> >>>>>>> 
> >>>>>>> Despite advice from others, unless you're running an autobuilder, 
> >>>>> don't 
> >>>>>>> use --continue. 
> >>>>>>> 
> >>>>>>> Please past the output of the base_libs failure. 
> >>>>>>> 
> >>>>>>> Also, check that the toolchain you're using is actually installed: 
> >>>>>>> $ ./ltib -m shell 
> >>>>>>> LTIB> gcc -v 
> >>>>>>> 
> >>>>>>> Regards, Stuart 
> >>>>>>> 
> >>>>>>> Enrico Miglino wrote: 
> >>>>>>>> Hi, 
> >>>>>>>> 
> >>>>>>>> after a compete build for EA3250 platform I tried to add in 
> >>>>>>>> configuration (with ./ltib -m config) X11 server and the 
> >>>>>>>> essential X11  modules, obating as a result that the build 
> >>>>>>>> process hangs with messages  like this (tried to change some 
> >>>>>>>> configuration parameters but the  problemis even the same): 
> >>>>>>>> 
> >>>>>>>> START 
> >>>>>>>> 
> >>> ===================================================================sudo 
> >>>>>>>> /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs 
> >>>>>>>> --dbpath  /var/lib/rpm --prefix / --ignorearch -ivh --force 
> >>>>>>>> --excludedocs  --noscripts --define '_tmppath /tmp/ltib' 
> >>>>>>>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/modeps-1.0-1.arm.rpm 
> >>>>>>>> error: failed to stat /home/enrico/.gvfs: Permission denied 
> >>>>>>>> Preparing... 
> >>>>>>>> ########################################### [100%] 
> >>>>>>>> 1:modeps                 ########################################### 
> >>>>> [100%] 
> >>>>>>>> 
> >>>>>>>> f_buildrpms() returned an error, exiting 
> >>>>>>>> traceback: 
> >>>>>>>> main:561 
> >>>>>>>> 
> >>>>>>>> 
> >>>>>>>> Started: Wed Dec  8 23:00:47 2010 
> >>>>>>>> Ended:   Wed Dec  8 23:10:20 2010 
> >>>>>>>> Elapsed: 573 seconds 
> >>>>>>>> 
> >>>>>>>> These packages failed to build: 
> >>>>>>>> base_libs libXt libXmu 
> >>>>>>>> ================================================================== 
> >>>>>>>> END 
> >>>>>>>> 
> >>>>>>>> Note that I'm workin on ubuntu 10.04 32 bit and I already set 
> >>>>>>>> /opt with a 777 permissions. 
> >>>>>>>> 
> >>>>>>>> Thanks. Enrico 
> >>>>>>>> 
> >>>>>>>> -------------------------------------------------------------- 
> >>>>>>>> Ovi Mail: Making email access easy 
> >>>>>>>> http://mail.ovi.com 
> >>>>>>>> 
> >>>>>>>> 
> >>>>>>>> _______________________________________________ 
> >>>>>>>> LTIB home page: http://ltib.org 
> >>>>>>>> 
> >>>>>>>> Ltib mailing list 
> >>>>>>>> address@hidden 
> >>>>>>>> http://lists.nongnu.org/mailman/listinfo/ltib 
> >>>>>>>> 
> >>>>>> -------------------------------------------------------------- 
> >>>>>> Ovi Mail: Making email access easy 
> >>>>>> http://mail.ovi.com 
> >>>>>> 
> >>>>>> 
> >>>> -------------------------------------------------------------- 
> >>>> Ovi Mail: Making email access easy 
> >>>> http://mail.ovi.com 
> >>>> 
> >>>> 
> >> -------------------------------------------------------------- 
> >> Ovi Mail: Making email access easy 
> >> http://mail.ovi.com 
> >> 
> >> 
> >> _______________________________________________ 
> >> LTIB home page: http://ltib.org 
> >> 
> >> Ltib mailing list 
> >> address@hidden 
> >> http://lists.nongnu.org/mailman/listinfo/ltib 
> >> 
> > 
> > -------------------------------------------------------------- 
> > Ovi Mail: Making email access easy 
> > http://mail.ovi.com 
> > 
> > 
> << ltib-x11-selected.png >> 
>

--------------------------------------------------------------
Ovi Mail: Making email access easy
http://mail.ovi.com
reply via email to
[Prev in Thread] Current Thread [Next in Thread]