> Yes, Simon. that's what i mean.
> I want packet transfer across 192.168.0.x (lwip device) and 192.168.1.x
> (other PCs).
>
> for example, from PC, i can use 'Route add' and "arp -s' commands to
> direct
> packet to my lwip device. but I think LWIP dropping the incoming packet
> from
> 192.168.1.x because they got different network number.
>
> Regards
>
> On Thu, Apr 30, 2009 at 12:01 PM, Simon Goldschmidt
> <
address@hidden>wrote:
>
> > I don't get it: Do you mean your lwIP device has to have 2 IP addresses,
> or
> > do you want the device to have 192.168.0.x and accept packets from
> > 192.168.1.x??
> >
> > Simon
> >
> >
> > > Hi,
> > >
> > > I need to sent & receive data between 2 different network address. One
> is
> > > 192.168.0.x and another is 192.168.1.x
> > >
> > > In etharp.c, etharp_ip_input() and etharp_ip_output(), it check
> > > 'ip_addr_netcmp'
> > > macro and drop the packet if the network number is not the same
> between 2
> > > different IP address.
> > >
> > > Would that be violate TCP/IP protocol if I commented out that checking
> to
> > > enable 192.168.0.x and 192.168.1.x to communicate across?
> > >
> > > Regards
> > >
> > > --
> > > Bandu
> > >
address@hidden> >
> > --
> > Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit
> allen:
> >
http://www.gmx.net/de/go/multimessenger01> >
> >
> > _______________________________________________
> > lwip-users mailing list
> >
address@hidden> >
http://lists.nongnu.org/mailman/listinfo/lwip-users
> >
>
>
>
> --
> Bandu
>
address@hidden