lynx-dev
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

LYNX-DEV Problem in latest set of mods by Fote


From: Larry W. Virden, x2487
Subject: LYNX-DEV Problem in latest set of mods by Fote
Date: Sat, 14 Dec 1996 07:53:54 -0500

I built the latest version of 2-6 and Fote's mods.  On SPARC/Solaris 2
with Sun's unbundled compiler, trying to invoke lynx generates the
following crash:


Looking up homepage.Reading symbolic information for nss_nis.so.1
Read 9652 of 22358 bytes of data.signal BUS (invalid address alignment) in 
_smalloc at 0xef6bb8d4
_smalloc+0x98:  ld      [%i5 + 0x8], %l3
(dbx 2) where
=>[1] _smalloc(0x18, 0x8, 0xef703a48, 0x1514c8, 0x0, 0x5f5f5f5f), at 0xef6bb8d4
  [2] malloc(0x14, 0x1514e4, 0x746d6c00, 0x7efefeff, 0x81010100, 0xff00), at 
0xef6bb910
  [3] HTSACopy(0xefffc0fc, 0x1514d0, 0x1514d0, 0x746d6c00, 0x81010100, 0xff00), 
at 0x818b0
  [4] 0x4fc5c(0x131268, 0x0, 0x12665c, 0x126680, 0x2000, 0x0), at 0x4fc5b
  [5] 0x7a6d8(0x126638, 0x7aa1c, 0xeab68, 0xea160, 0x6, 0x4), at 0x7a6d7
  [6] SGML_character(0xe9b70, 0x3e, 0x1f, 0xb7c44, 0x22, 0x12), at 0x7bfb8
  [7] SGML_write(0x126638, 0xfd443, 0xfd183, 0x130e08, 0x186a0, 0xefffc1a8), at 
0x7cd24
  [8] HTCopy(0x125c28, 0x4, 0xe6d68, 0x130e08, 0xfc8dc, 0x1000), at 0x83318
  [9] HTLoadHTTP(0x1305f7, 0x1305f8, 0xeb000, 0x1, 0x125c28, 0x125d40), at 
0x6ea28
  [10] 0x6c134(0xe9d70, 0xe9d84, 0x116810, 0x10ac38, 0xeb27c, 0xe9d74), at 
0x6c133
  [11] HTLoadAbsolute(0xefffcec4, 0x116810, 0x0, 0x344, 0x3, 0x0), at 0x6c5c8
  [12] getfile(0xe6400, 0xeb000, 0xe9c00, 0xe6c00, 0xf9e3c, 0x3a), at 0x29eb8
  [13] mainloop(0x0, 0x10b4d8, 0x101b88, 0x101b84, 0x101b8c, 0x101b94), at 
0x2eb60
  [14] main(0xe6400, 0xe6400, 0xe6684, 0x0, 0xe6400, 0xe6400), at 0x2c558
(
-- 
Larry W. Virden                 INET: address@hidden
<URL:http://www.teraform.com/%7Elvirden/> <*> O- "We are all Kosh."
Unless explicitly stated to the contrary, nothing in this posting should 
be construed as representing my employer's opinions.
;
; To UNSUBSCRIBE:  Send a mail message to address@hidden
;                  with "unsubscribe lynx-dev" (without the
;                  quotation marks) on a line by itself.
;

reply via email to

[Prev in Thread] Current Thread [Next in Thread]