[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: LYNX-DEV Lynx386 not connecting
From: |
Marc D. Williams |
Subject: |
Re: LYNX-DEV Lynx386 not connecting |
Date: |
Thu, 29 Jan 1998 18:39:31 PST8PDT |
> As you said, there must be something conflicting with lynx. It would
> probably be helpful to others if you could discover what that is. How
> about starting with a clean boot to a minimal DOS system, only loading
> any drivers actually needed to run the system and an environment at
> least large enough to hold all the variables? If lynx runs on the
> bare-bones system, then it is a matter of adding back each line from
> config.sys and autoexec.bat, one by one, until lynx stops working.
> Doug
Thought about that this morning actually. Had my fingers crossed but
still no go. My clean boot only consists of the following (I use boot.sys):
CONFIG.SYS
buffers=20
FILES=30
shell=c:\4dos\4dos.com /p
AUTOEXEC.BAT
set path=c:\dos;
c:
Marc
- Re: LYNX-DEV Lynx386 not connecting, (continued)
- Re: LYNX-DEV Lynx386 not connecting, kifox, 1998/01/27
- Re: LYNX-DEV Lynx386 not connecting, Marc D. Williams, 1998/01/28
- Re: LYNX-DEV Lynx386 not connecting, Marc D. Williams, 1998/01/28
- Re: LYNX-DEV Lynx386 not connecting, Marc D. Williams, 1998/01/29
- Re: LYNX-DEV Lynx386 not connecting, dave mclean, 1998/01/29
- Re: LYNX-DEV Lynx386 not connecting, Marc D. Williams, 1998/01/29
- Re: LYNX-DEV Lynx386 not connecting,
Marc D. Williams <=
- Re: LYNX-DEV Lynx386 not connecting, Marc D. Williams, 1998/01/30