[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [monit] monit and active/passive

From: Frank
Subject: RE: [monit] monit and active/passive
Date: Sun, 13 Sep 2009 20:55:08 -0400

No more ideas ?


Thanks BTW


From: address@hidden [mailto:address@hidden On Behalf Of Frank
Sent: September-13-09 5:00 PM
To: 'This is the general mailing list for monit'
Subject: RE: [monit] monit and active/passive


Monit/t says...

Status running

Monitoring mode passive

Monitoring status monitored


The dump doesn’t show anything about active/passive


Log                = True

 Use syslog         = False

 Is Daemon          = True

 Use process engine = True

 Poll time          = 60 seconds with start delay 0 seconds

 Expect buffer      = 256 bytes

 Event queue        = base directory /var/monit/ with 1000 slots



Monitoring mode      = active


On the working one it says..:

Status running

Mode active

Monitoring status monitored


They run same versions


From: address@hidden [mailto:address@hidden On Behalf Of Martin Pala
Sent: September-13-09 4:47 PM
To: This is the general mailing list for monit
Subject: Re: [monit] monit and active/passive




can you run monit like this and check output?:


  monit -vIc <pathtomonitconfiguration>


It will dump parsed configuration on the beginning.


The passive mode means, that the service is monitored, but not restarted ... are you sure it is in passive mode? Isn't it just unmonitored?







On Sep 13, 2009, at 9:32 PM, Frank wrote:


I have 2 exactly same monitrc files..


One is active other stays stuck in passive mode...


Any idea why ?


set daemon 60

set logfile /var/log/monit.log

set mailserver

set httpd port 9999



set eventqueue basedir /var/monit/ slots 1000

#following line has been rewritten for the list ;)

set mmonit http://user:address@hidden:myport/collector


# Freeswitch

check process freeswitch with pidfile "/usr/local/freeswitch/log/"


start program "/usr/bin/screen -d -m /usr/local/freeswitch/bin/freeswitch"

#start program "/usr/bin/screen -S freeswitch -d -m /usr/local/freeswitch/bin/freeswitch -nf"

stop program "/usr/local/freeswitch/bin/freeswitch -stop"

if totalmem > 140.0 MB then alert

if totalmem > 180.0 MB for 3 cycles then restart

# Checks sip port on localhost, not always suitable

# if failed port 5060 type UDP then restart

# Checks mod_event_socket on localhost. Maybe more suitable

#if failed port 8021 type TCP then restart

if 5 restarts within 5 cycles then timeout

alert address@hidden

mode active



To unsubscribe:


reply via email to

[Prev in Thread] Current Thread [Next in Thread]