Re: [Om-synth] Re: patchage-0.2.3.tar.gZ not in gzip format ?

[jah]

Am Samstag, den 15.04.2006, 23:57 +0200 schrieb Jean-Baptiste Mestelan:
> Hello again.
> 
> Well, I have checked out latest 'patchage' module out of CVS.
> I could compile libflowcanvas all right and install it.
>  patchage/configure went OK too for, but install fails and outputs this  :
> make  all-recursive
> make[1]: Entering directory `/home/audio/_dl/cvs/patchage'
> Making all in src
> make[2]: Entering directory `/home/audio/_dl/cvs/patchage/src'
> if g++ -DHAVE_CONFIG_H -I. -I. -I..   
> -DPKGDATADIR=\"/usr/local/share/patchage\" -DXTHREADS -D_REENTRANT
> -DXUSE_MTSAFE_API -I/usr/include/libglademm-2.4
> -I/usr/lib/libglademm-2.4/include -I/usr/include/gtkmm-2.4
> -I/usr/lib/gtkmm-2.4/include -I/usr/include/libglade-2.0
> -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include
> -I/usr/include/gdkmm-2.4 -I/usr/lib/gdkmm-2.4/include
> -I/usr/include/pangomm-1.4 -I/usr/include/atkmm-1.6
> -I/usr/include/gtk-2.0 -I/usr/include/sigc++-2.0
> -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0
> -I/usr/lib/glib-2.0/include -I/usr/lib/gtk-2.0/include
> -I/usr/X11R6/include -I/usr/include/pango-1.0 -I/usr/include/freetype2
> -I/usr/include/freetype2/config -I/usr/include/atk-1.0
> -I/usr/include/libxml2   -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_API
> -I/usr/include/libgnomecanvasmm-2.6
> -I/usr/lib/libgnomecanvasmm-2.6/include -I/usr/include/gtkmm-2.4
> -I/usr/lib/gtkmm-2.4/include -I/usr/include/libgnomecanvas-2.0
> -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include
> -I/usr/include/gdkmm-2.4 -I/usr/lib/gdkmm-2.4/include
> -I/usr/include/pangomm-1.4 -I/usr/include/atkmm-1.6
> -I/usr/include/gtk-2.0 -I/usr/include/sigc++-2.0
> -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0
> -I/usr/lib/glib-2.0/include -I/usr/lib/gtk-2.0/include
> -I/usr/X11R6/include -I/usr/include/pango-1.0 -I/usr/include/freetype2
> -I/usr/include/freetype2/config -I/usr/include/atk-1.0
> -I/usr/include/libart-2.0      -I/usr/include/lash-1.0
> -I/usr/include/alsa   -I/usr/local/include   -g -O2 -DNDEBUG -DNDEBUG
> -pipe -Wall -fmessage-length=139
> -fdiagnostics-show-location=every-line -MT main.o -MD -MP -MF
> ".deps/main.Tpo" -c -o main.o main.cpp; \
> then mv -f ".deps/main.Tpo" ".deps/main.Po"; else rm -f
> ".deps/main.Tpo"; exit 1; fi
> In file included from /usr/include/lash-1.0/lash/lash.h:26,
>                  from main.cpp:26:
> /usr/include/lash-1.0/lash/event.h:24:23: error: uuid/uuid.h: No such
> file or directory
> /usr/include/glibmm-2.4/glibmm/containers.h: In member function
> 'typename Glib::List_Iterator_Base<T>::reference
> /usr/include/glibmm-2.4/glibmm/containers.h:
> Glib::SList_Iterator<T>::operator*() const':
> /usr/include/glibmm-2.4/glibmm/containers.h:181: warning: statement
> has no effect
> /usr/include/gtkmm-2.4/gtkmm/treeview.h: In member function 'int
> Gtk::TreeView::append_column_editable(const Glib::ustring&, const
> /usr/include/gtkmm-2.4/gtkmm/treeview.h: Gtk::TreeModelColumn<ColumnType>&)':
> /usr/include/gtkmm-2.4/gtkmm/treeview.h:1424: warning: statement has no effect
> /usr/include/gtkmm-2.4/gtkmm/treeview.h: In function 'void
> /usr/include/gtkmm-2.4/gtkmm/treeview.h:
> Gtk::TreeView_Private::_connect_auto_store_editable_signal_handler(Gtk::TreeView*,
> /usr/include/gtkmm-2.4/gtkmm/treeview.h: Gtk::CellRenderer*, const
> Gtk::TreeModelColumn<ColumnType>&)':
> /usr/include/gtkmm-2.4/gtkmm/treeview.h:1681: warning: statement has no effect
> /usr/include/lash-1.0/lash/event.h: At global scope:
> /usr/include/lash-1.0/lash/event.h:40: error: 'uuid_t' has not been declared
> /usr/include/lash-1.0/lash/event.h:45: error: 'uuid_t' has not been declared
> make[2]: *** [main.o] Error 1
> make[2]: Leaving directory `/home/audio/_dl/cvs/patchage/src'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/home/audio/_dl/cvs/patchage'
> make: *** [all] Error 2
> 
> 
> I have lash 0.5.0 (and lash-devel 0.5.0) from CCRMA planet . Is this
> OK for patchage ?
> Many thanks.
> _______________________________________________
> Om-synth mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/om-synth
( jackd -R -d alsa & ) && echo 0000 && patchage
jackd 0.100.0
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details

JACK compiled with System V SHM support.
0000
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|
32bit
control device hw:0
configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
nperiods = 2 for capture
nperiods = 2 for playback
Loading configuration file /home/jah/.patchagerc
Unable to load file /home/jah/.patchagerc!
Connecting to Jack... Done
ALSA lib seq_hw.c:455:(snd_seq_hw_open) open /dev/snd/seq failed: No
such file or directory
Error: Couldn't open Alsa sequencer
terminate called without an active exception
Connecting to Alsa... subgraph starting at Patchage timed out
(subgraph_wait_fd=7, status = 0, state = Triggered)


**** alsa_pcm: xrun of at least 1.548 msecs

cannot read event response from client [Patchage] (Connection reset by
peer)
cannot send event to client [Patchage] (Broken pipe)


**** alsa_pcm: xrun of at least 42.847 msecs

Aborted
address@hidden:~$ killall jackd jack main caught signal 15
address@hidden:~$ no message buffer overruns

address@hidden:~$
REMARK:
 uname -r
2.6.15.6-ubuntu1jah
address@hidden:~$

Can anyone help here?