[osip-dev] eXosip and reINVITE

[Tsvetan Filev]

Hi.

I'm trying to achieve the following SIP communication:

https://www.websequencediagrams.com/cgi-bin/cdraw?lz=cGFydGljaXBhbnQgYWxpY2UKAAUNc3Rlcmlza18xAAoNZVhvc2lwABQWMgA0DWJvYgoKIyBJbml0aWFsIGludml0ZQoAZAUgLT4AVQs6ABUHIChzZHApCgBvCgAiBQArBTogMTAwIFRyeWluZwASDwCBCwYANQ8AgSAGAFkOADcOAA8TMgBxGDIAXgoAcxcAHQVib2IAgTwPYm9iAFQOAIE7DgAKFjgwIFJpbmcAThIAeAoAGAsAgVIYADIUAIJDDgBdCwCBFBUyMDAgT0sAgXcVYm9iIDogQUNLAIIMGAAvDQCCVxQAOAcAgxEXAGUWAINkCwBuEACEHg0AgSsOAIReEgCBNAcKIyByZS0AhRAHAIQ3HmluLWRpYWxvZwCEIzwAgS0sAIUBHgCAfxAAhHkwAIJ2MQCDahUAggUXAIVVHwCEMTkK&s=rose

This is basically initial INVITE followed by reINVITE that tells the 
phones to use direct RTP traffic instead of RTP going through asterisk.
eXosip node is a transparent B2BUA written using the eXosip/osip2 library.
I set directmedia=outgoing to both asterisks which tells them to send 
reINVITE only to outgoing leg (the default asterisk behavior is to send 
to both legs 
https://wiki.asterisk.org/wiki/display/AST/SIP+Direct+Media+Reinvite+Glare+Avoidance).

So I have two call legs in my eXosip node : call leg 1 (asterisk 1) and 
call leg 2 (asterisk 2).

I was able to send successfully reINVITE from eXosip to asterisk 2 and 
Trying from eXosip to asterisk 1.
When I get OK from asterisk 2 and try to send OK to asterisk 1 by 
copying the sdp from asterisk 2 I get an error.

Is it possible to achieve this with eXosip and how ?

Regards.